Updated Changes.* to remove legacy branch/irrelevant stuff.

git-svn-id: http://anope.svn.sourceforge.net/svnroot/anope/trunk@2413 5417fbe8-f217-4b02-8779-1006273d7864

1 files changed, 1 insertions, 774 deletions

diff --git a/Changes.conf b/Changes.conf
index 3903988a3..1e61cb65d 100644
--- a/Changes.conf
+++ b/Changes.conf
@@ -3,7 +3,7 @@ Anope Version 1.9.1
 ** DELETED  CONFIGURATION DIRECTIVES **
 Nick tracking has been removed as an option.
 
-Anope Version 1.8.0
+Anope Version 1.9.0
 -------------------
 ** ADDED    CONFIGURATION DIRECTIVES **
 
@@ -12,776 +12,3 @@ Anope Version 1.8.0
 ** DELETED  CONFIGURATION DIRECTIVES **
 
 
-Anope Version 1.7.24
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.23b
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.23
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-# OSIgnoreDBName [OPTIONAL]
-# Module: os_ignore_db
-#
-# Use the given filename as database for services ignores. 
-# If not given, the default of "os_ignore.db" will be used.
-#
-#OSIgnoreDBName "os_ignore.db"
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.22
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-# BotCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of BotServ's core.
-#     It is not recommended you change these settings unless you are
-#     sure you understand exactly what it is you are doing.
-BotCoreModules "bs_help bs_botlist bs_assign bs_set bs_kick bs_badwords bs_act bs_info bs_say bs_unassign bs_bot bs_fantasy bs_fantasy_kick bs_fantasy_kickban bs_fantasy_owner bs_fantasy_seen"
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.21
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.20
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.19
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.18
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-###########################################################################
-#
-# Encryption settings
-#
-###########################################################################
-
-# EncModule <module_name>  [REQUIRED]
-#     The encryption module to use when dealing with passwords.
-#     This determines how the passwords are stored in the databases,
-#     and does not add any security as far as transmitting passwords over
-#     the network goes.
-#     enc_none provides no password encryption, storing the password in
-#     plain text, this is the most versiatle as passwords can easily be
-#     recovered.
-#
-#     NOTE: users of anope's previous (broken) md5 implementation should 
-#     select the enc_old option, or things may break.
-#
-#     NOTE2: Some of these encryption methods are one-way (md5, sha1, old)
-#     meaning that you can NOT retrive the passwords in plain text once
-#     encrypted.
-#
-#     Plain Text                -  enc_none
-#     Previous (broken) MD5     -  enc_old
-#     MD5                       -  enc_md5 
-#     SHA1                      -  enc_sha1
-#
-
-EncModule "enc_none"
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.17
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.16
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.15
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-# UseStrictPrivMsg [OPTIONAL]
-#    Using this directive will force services to only respond to privmsgs
-#    addressed to Nick@ServerName - e.g. NickServ@localhost.net.
-#    This should be used on conjunction with ircd aliases.
-#
-
-#UseStrictPrivMsg
-
-# NSResendDelay <time>  [RECOMMENDED]
-#     Sets the minimum length of time between consecutive uses of the
-#     RESEND command.  If not given, this restriction is disabled (note
-#     that this allows "resend flooding" or "mail bombing").
-
-NSResendDelay  90s
-
-NSDefAutoop
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-ModuleDelayedAutoload "cs_appendtopic cs_enforce ns_maxemail os_info hs_request"
-
-# LimitSessions  [OPTIONAL]
-#     Enables session limiting. Session limiting prevents users from 
-#     connecting more than a certain number of times from the same host at the
-#     same time - thus preventing most types of cloning. Once a host reaches 
-#     it's session limit, all clients attempting to connect from that host 
-#     will be killed. Exceptions to the default session limit, which are based 
-#     on host names, can be defined via the exception list. It should be noted
-#     that session limiting, along with a large exception list, can degrade
-#     services' performance. See the source and comments in sessions.c and the
-#     online help for more information about session limiting.
-#
-#     NOTE:  This option is not available when STREAMLINED is defined in
-#     the Makefile.
-
-LimitSessions
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-# NSAutoOPDBName [OPTIONAL]
-# Module: ns_noop
-#
-# Use the given filename as database for the autoop list. If not given,
-# the default of "autoop.db" will be used.
-#
-#NSAutoOPDBName "autoop.db"
-
-# KillClonesAkillExpire <time>  [REQUIRED]
-#     Sets the expiry time for autokills added for hosts that have been
-#     killed using the KILLCLONES command.
-
-KillClonesAkillExpire   30m
-
-# CheckClones <minusers> <maxdelay> <warningdelay>  [DEPRECATED]
-#     Causes Services to try and detect "clones" connecting to the network.
-#     A WALLOPS (or GOPER, if supported on the IRC server) will be sent if
-#     Services thinks it has found clones.
-#
-#     This feature has been superseded by Session Limiting.
-#
-#     <minusers> sets the minimum number of users which must successively
-#     connect to the network before Services will send a clone warning.
-#
-#     <maxdelay> sets the maximum time that can elapse between successive
-#     users before Services decides they are not clones.
-#
-#     <warningdelay> sets the minimum time between clone warnings for
-#     clones from the same host.
-#
-#     NOTE:  This option is not available when STREAMLINED is defined in
-#     the Makefile.
-
-# CheckClones   5 10s 30s
-
-# KillClones [DISCOURAGED]  [DEPRECATED]
-#     Causes Services to kill users which trigger the clone warnings.  (If
-#     CheckClones is disabled, this will have no effect.)
-#
-#     This feature has been superceded by Session Limiting.
-#
-#     BEWARE!  The clone checking code is easily fooled; it can be
-#     triggered falsely under many conditions, for example:
-#
-#         - Multiple users connecting from a shell machine.
-#
-#         - A single user repeatedly connecting and disconnecting.
-#
-#     Be very sure you know what you're doing before you even think about
-#     enabling this option, and remember that Services comes with no
-#     warranty.
-#
-#     If that wasn't enough discouragement:
-#
-#     ***** DO NOT ENABLE THIS OPTION! *****
-#
-#     NOTE:  This option is not available when STREAMLINED is defined in
-#     the Makefile.
-
-#KillClones
-
-Anope Version 1.7.13
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.12
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# BSFantasyCharacter [REQUIRED]
-#    This option allows you to change the default prefix for fantasy
-#    commands in channels. This character will have to be prepended to all
-#    fantasy commands. If you choose "!" (the default), fantasy commands
-#    will, for example, be "!kick", "!op", etc.
-
-BSFantasyCharacter "!"
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.11
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# NickLen [REQUIRED]
-#     Set this to the maximum allowed nick length on your network. Anope does
-#     not support values larger than 31, so setting them makes no sense. Be
-#     sure to set this correctly, as setting this wrong can result in services
-#     being disconnected from the network.
-
-NickLen 31
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-# UserKey1|2|3 <value> [RECOMMENDED]
-#
-#     These keys are required to initiate the random number generator. These
-#     numbers MUST be random as you want your passcodes to be random. Don't
-#     give these keys to anyone! Keep them private!
-#
-#     *** NOTE ***
-#     If you don't enable these, or keep their default values, any talented
-#     programmer would be able to easily "guess" random strings used to mask
-#     information. Be safe, and come up with three different 7 digit numbers
-
-#UserKey1 9866235
-#UserKey2 8362013
-#UserKey3 2362899
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.10
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.9
--------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-# IRCDModule <module_name>  [REQUIRED]
-#     The ircd protocol module should be used when connecting anope to your
-#     chosen IRCD.  This should be one of the following options, or a file 
-#     provided by your IRCD author.
-#
-#     Bahamut 1.4.27 [or later]         - "bahamut"
-#     DreamForge 4.6.7                  - "dreamforge"
-#     Hybrid IRCd 7.0 [experimental]    - "hybrid"
-#     InspIRCd 1.0 Beta 5               - "inspircd"
-#     InspIRCd module is provided by Brain <brain@inspircd.org> 
-#     Plexus 2.0 [or later]             - "plexus"
-#     PTLink 6.15.0 [experimental]      - "ptlink"
-#     RageIRCd 2.0.0 [beta-6 of later]  - "rageircd"
-#     Ratbox 2.0.6 [or later]           - "ratbox"
-#     ShadowIRCD 4.0x [beta 7 or later] - "shadowircd"
-#     Solid IRCD 3.4.x [3.4.6 or later] - "solidircd"
-#     UltimateIRCd 3.0.0 [or later]     - "ultimate3"
-#     UltimateIRCd 2.8.2 [or later]     - "ultimate2"
-#     Unreal 3.2 [beta-19 or later]     - "unreal32"
-#     Unreal 3.1.1 [or later]           - "unreal31"
-#     ViagraIRCd 1.3.x [or later]       - "viagra"
-#
-
-#IRCDModule "unreal32"
-
-# HostCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of HostServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-HostCoreModules "hs_help hs_on hs_off hs_group hs_list hs_set hs_setall hs_del hs_delall"
-
-# MemoCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of MemoServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-MemoCoreModules "ms_send ms_cancel ms_list ms_read ms_del ms_set ms_info ms_rsend ms_check ms_staff ms_sendall ms_help"
-
-# HelpCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of HelpServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-HelpCoreModules "he_help"
-
-# BotCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of BotServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-BotCoreModules "bs_help bs_botlist bs_assign bs_set bs_kick bs_badwords bs_act bs_info bs_say bs_unassign bs_bot bs_fantasy bs_fantasy_kick bs_fantasy_kickban bs_fantasy_owner bs_fantasy_seen bs_fantasy_unban"
-
-# OperCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of OperServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-OperCoreModules "os_help os_global os_stats os_oper os_admin os_staff os_mode os_kick os_clearmodes os_killclones os_akill os_sgline os_sqline os_szline os_chanlist os_userlist os_logonnews os_randomnews os_opernews os_session os_noop os_jupe os_ignore os_set os_reload os_update os_restart os_quit os_shutdown os_defcon os_chankill os_svsnick os_oline os_umode os_modload os_modunload os_modlist os_modinfo"
-
-# NickCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of NickServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-NickCoreModules "ns_help ns_register ns_group ns_identify ns_access ns_set ns_drop ns_recover ns_release ns_sendpass ns_ghost ns_alist ns_info ns_list ns_logout ns_status ns_update ns_getpass ns_getemail ns_forbid ns_suspend"
-
-# ChanCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of ChanServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-ChanCoreModules "cs_help cs_register cs_identify cs_set cs_xop cs_access cs_akick cs_drop cs_sendpass cs_ban cs_clear cs_modes cs_getkey cs_invite cs_kick cs_list cs_logout cs_topic cs_info cs_getpass cs_forbid cs_suspend cs_status"
-
-# OSOpersOnly [RECOMMENDED]
-#     If this is defined, only IRC Operators will be permitted to use
-#     OperServ, regardless of module based command access restrictions.
-
-OSOpersOnly
-
-# NSEmailMax [OPTIONAL]
-# Module: ns_maxemail
-#
-# Limit the amount of registrations with the same email address to the
-# amount given here. If set to 0 or left commented, there will be no limit
-# enforced when registering new accounts or using /msg NickServ SET EMAIL.
-#
-#NSEmailMax 1
-
-# NSAutoOPDBName [OPTIONAL]
-# Module: ns_noop
-#
-# Use the given filename as database for the autoop list. If not given,
-# the default of "autoop.db" will be used.
-#
-#NSAutoOPDBName "autoop.db"
-
-# OSInfoDBName [OPTIONAL]
-# Module: os_info
-#
-# Use the given filename as database for the oper information lines.
-# If not given, the default of "os_info.db" will be used.
-#
-#OSInfoDBName "os_info.db"
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-# UserKey1|2|3 <value> [REQUIRED]
-#     
-#     These keys are required to initiate the random number generator. These
-#     numbers MUST be random as you want your passcodes to be random. Don't
-#     give these keys to no anyone! Keep them private!
-#     For those pple who don't understand what to do here: Just pick three
-#     _different_ _random_ numbers with about 6 or 7 digits and put them here.
-#     If the keys don't work, they might be too long or you forgot to remove
-#     the # in front of them. Example:
-#     UserKey1 9866235
-
-#     UserKey1 <your_first_random_number_here>
-#     UserKey2 <your_second_random_number_here>
-#     UserKey3 <you_third_random_number_here>
-
-# Numeric [OPTIONAL]
-#     Many ircd identify themselves with a Numeric ID when using this option
-#     consult your ircds documentation before using this.
-#Numeric "3AX"
-#Numeric "4"
-
-# ModuleDelayedAutoload [OPTIONAL]
-#
-# When compiled with module support, this contains a space separated list
-# of modules to automaticaly load when services are ready for new clients.
-# e.g. new pesudo clients such as CatServ :-) *meow*
-# By default a number of modules that we found worth adding by default are
-# loaded. Feel free to change this if you want to add more, or remove some
-# from the list.
-#
-ModuleDelayedAutoload "cs_appendtopic cs_enforce ns_maxemail ns_noop os_info"
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-###########################################################################
-#
-# Proxy detection
-#
-###########################################################################
-
-# Note: if ProxyDetect is not set, all parameters after it in this section
-# are optional.
-
-# ProxyDetect [OPTIONAL]
-#
-# Enables insecure proxy detection. Services will automatically
-# scan each incoming user and akill those that use insecure proxy.
-#
-# Anope currently supports detection of Wingate (port 23), SOCKS4/5
-# (port 1080), and HTTP proxy (ports 3128 and 8080). It uses the
-# protocol of each proxy type to connect to an IRC server, it does
-# not only check if the port is open (so your users may still have
-# an open telnet server on their port 23 for example).
-#
-# WARNING: You should get the authorization of the administrator of
-# the computer which runs the proxy detector before enabling it; not
-# all administrators will accept it. Also note that in certain
-# countries, port scanning is prohibited.
-#
-# This feature requires threading support to be compiled into Anope.
-
-#ProxyDetect
-
-# ProxyThreads <number> [REQUIRED]
-#
-# Sets the number of threads Services will launch when starting. Each
-# thread will have the responsibility to scan queued hostname for
-# proxies.
-#
-# This value must be set depending of the number of users you have
-# on your network. The more threads are used, the more simultaneous
-# checks can be done. Remember however, that threads are
-# resource-consuming.
-#
-# WARNING: On Linux, each thread takes a background process, and there
-# is an additional process used for thread management; this is a problem
-# if you are limited in the number of background process you can use
-# (on a paid shell for example).
-
-ProxyThreads 5
-
-# ProxyMessage... <message> [RECOMMENDED]
-#
-# Sets the notices that will be sent out to users before Services
-# scan them for proxy. You may not use all of them, but just as much as
-# necessary.
-
-ProxyMessage1 "I will now detect if you're using an insecure proxy."
-ProxyMessage2 "If you see a connection on port 23, 1080, 3128 or 8080 from"
-ProxyMessage3 "my.box.net, please disregard it, as it is the detector in action."
-ProxyMessage4 "See http://proxy.myirc.net/ for information about our proxy policy."
-#ProxyMessage5 "Enter"
-#ProxyMessage6 "whatever"
-#ProxyMessage7 "you want"
-#ProxyMessage8 "here."
-
-# ProxyCheck... [OPTIONAL]
-#
-# Determines what types of proxy Anope will try to find (respectively
-# Wingate on port 23, SOCKS4 on port 1080, SOCKS5 on port 1080, HTTP
-# proxy on port 3128, HTTP proxy on port 8080 and HTTP proxy on port
-# 80).
-
-ProxyCheckWingate
-ProxyCheckSocks4
-ProxyCheckSocks5
-ProxyCheckHTTP1
-ProxyCheckHTTP2
-ProxyCheckHTTP3
-
-# ProxyTimeout <time> [REQUIRED]
-
-# Sets the maximum length of time we allow a connect/read operation to
-# take. If you set this value too high, your threads may hang on a single
-# check for a very long time. The best is to try different values
-# and see which one is the more efficient for your network.
-
-ProxyTimeout 15s
-
-# ProxyTestServer <ip> <port> [REQUIRED]
-#
-# Sets the *IP* and port of the IRC server to use as a target when
-# testing users for proxy.
-
-ProxyTestServer "1.2.3.4" 6667
-
-# ProxyExpire <time> [RECOMMENDED]
-#
-# Sets the length of time before a proxy host cache entry expires, if
-# not used. If this is not set the default time is 2 days.
-
-ProxyExpire 30d
-
-# ProxyCacheExpire <time> [REQUIRED]
-#
-# Sets the length of time before a normal host cache entry expires, if
-# not used. This cannot be set to 0d.
-#
-# Every non-proxy hosts will be stored in cache (to avoid too many scans
-# to the same host), so you should set this enough low to not fill your
-# memory, especially on large networks.
-
-ProxyCacheExpire 1d
-
-# ProxyAkillReason <reason> [REQUIRED]
-#
-# Sets the reason that will be used to AKILL an user from the network
-# if a proxy is detected.
-
-ProxyAkillReason "You're using an insecure proxy. See http://proxy.myirc.net/config.html for information about how to config your proxy in a safe manner."
-
-# WallProxy [OPTIONAL]
-#
-# Sends a WALLOPS/GLOBOPS when an user using an insecure proxy is being
-# AKILLed.
-
-WallProxy
-
-# ProxyMax <number> [REQUIRED]
-#
-# Sets the maximum proxy cache entries that can be displayed in a single
-# call to OperServ CACHE.
-
-ProxyMax 50
-
-
-Anope Version 1.7.8
--------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# UseTS6  [OPTIONAL]
-#
-# Modern hybrid ircd like Ratbox 2.0.x support a protocol called TS6. 
-# However this protocol is optional thus our default support is for without 
-# TS6, if you want to take advantage of TS6, enable this option.
-
-#UseTS6
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.7
--------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# NSAddAccessOnReg  [OPTIONAL]
-#
-# When enabled, services will add the usermask of registering users to the
-# access list of their newly created account. If you disable this, users
-# will always have to identify to nickserv before being recognized, unless
-# they manually add an address to the access list of their account.
-
-NSAddAccessOnReg
-
-# UlineServers  [OPTIONAL]
-#
-# A list of ulined servers on your network, these servers are assumed they
-# can set channel modes and we will not attempt to take them from them
-# WARNING: do not put your user servers in this option
-
-UlineServers "stats.your.network, proxy.your.network"
-
-# KillOnSGline [OPTIONAL]
-#
-# When enabled, this option makes the services send an (SVS)KILL command
-# immediately after SGLINE ADD. This eliminates the need of killing the 
-# users after the SGLINE has been added.
-
-# KillOnSGline
-
-# KillOnSQline [OPTIONAL]
-#
-# When enabled, this option makes the services send an (SVS)KILL command
-# immediately after SQLINE ADD. This eliminates the need of killing the 
-# users after the SQLINE has been added.
-
-# KillOnSQline
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-# NetworkDomain <name> [OPTIONAL]
-#
-#     If your network has a common domain name, specify it there (for
-#     example, all IRCZONE servers have a name ending in ".irczone.cl",
-#     so "irczone.cl" would be set there.
-#
-#     You can specify more than one Network Domain by separating each one by
-#     a space: NetworkDomain "localnet.net localnet.com"
-#
-#     Note that this directive is no longer used by the GLOBAL command, since
-#     it uses a dynamic list of connected servers regardless of their
-#     domains. However, some modules may still use this value, so you might
-#     want to keep it just in case.
-
-NetworkDomain "localnet.com"
-
-# ListOpersOnly  [DEPRECATED]
-#     When enabled, limits use of the ChanServ and NickServ LIST commands
-#     to IRC operators.
-#
-#     This directive has been superseded by the NSListOpersOnly and
-#     CSListOpersOnly directives.
-
-#ListOpersOnly
-
-Anope Version 1.7.6
--------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# UserKey1|2|3 <value> [REQUIRED]
-#     
-#     These keys are required to initiate the random number generator. These
-#     numbers MUST be random as you want your passcodes to be random. Don't
-#     give these keys to no anyone! Keep them private!
-
-#UserKey1 9866235
-#UserKey2 5216332
-#UserKey3 9651291
-
-
-# RestrictOperNick [OPTIONAL]
-#     Forbids the registration of nicks that contain nick with services        
-#     access. So if Tester is a Services Oper, for example, You can't 
-#     register NewTester or Tester123 unless you are an IRC operator.
-#RestrictOperNicks
-
-# UseTokens [OPTIONAL]
-#     Allows irc networks to use TOKEN commands instead of the 
-#     standard commands. This saves bandwidth but can break older
-#     modules that are not set to trap for TOKEN - if you are using
-#     older modules do NOT use this option
-#UseTokens
-
-# UseSVS2MODE [OPTIONAL]
-#     On Unreal IRCD use SVS2MODE instead of SVSMODE, doing this will
-#     show services changing user modes.
-#UseSVS2MODE
-
-# NewsCount [OPTIONAL]
-#     The number of LOGON/OPER News item to display when a user logs
-#     on. The default value is 3
-#NewsCount 3
-
-# Numeric [OPTIONAL]
-#     Many ircd identify themselves with a Numeric when using this option
-#     consult your ircds documentation before using this
-#Numeric 0
-
-# UnRestrictSAdmin [OPTIONAL]
-#     On many ircd Anope removes the umode of +a from users whom are not
-#     Service Admin in Anope. This mode is NOT used by Anope for any form
-#     of access. Thus this option allows them to keep the mode without having
-#     to be a Service Admin in Anope
-#UnRestrictSAdmin
-
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.5
--------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# UseSVSHOLD [OPTIONAL]
-#     Allows Bahamut-networks to use SVSHOLD instead of the services
-#     enforcer. This option has been introduced in Bahamut 1.4.35 and
-#     places a temporary Q:Line instead of introducing a new nick,
-#     which is better for both CPU and bandwidth. If you enable this
-#     option on a pre-1.4.35 Bahamut, it is most likely to break.
-#UseSVSHOLD
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-# NetworkDomain <name> [OPTIONAL]
-#
-#     If your network has a common domain name, specify it there (for
-#     example, all IRCZONE servers have a name ending in ".irczone.cl",
-#     so "irczone.cl" would be set there.
-#
-#     You can specify more than one Network Domain by separating each one by
-#     a space: NetworkDomain "localnet.net localnet.com"
-#
-#     Note that this directive is no longer used by the GLOBAL command, since
-#     it uses a dynamic list of connected servers regardless of their
-#     domains. However, some modules may still use this value, so you might
-#     want to keep it just in case.
-
-NetworkDomain "localnet.com"
-
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.4
--------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# NSNickTracking  [OPTIONAL]
-#
-# When enabled, services will track your last nick identified when issuing
-# nick changes.
-
-#NSNickTracking
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-** DELETED  CONFIGURATION DIRECTIVES ** 
-
-Anope Version 1.7.3
--------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# BSCaseSensitive [OPTIONAL]
-#    This option will make botserv use cAsE sEnSiTiVe checking for badwords
-
-# BSCaseSensitive
-
-# MSMemoReceipt    [OPTIONAL]
-# Allow the use of memo receipts for the following groups:
-# 1 - Opers Only
-# 2 - Everybody
-#
-#MSMemoReceipt 1
-
-Anope Version 1.7.2
---------------------
-No Changes.
-
-Anope Version 1.7.1
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# UseRDB [OPTIONAL]
-# 
-#    Enable this if you want anope to load its data from a remote database.
-#    (e.g. MySQL)
-#
-#UseRDB
-
-# NickRegDelay <seconds> [OPTIONAL]
-#     Prevents users from regging their nick if they are not
-#     connected for at least X seconds.         
-#NickRegDelay 30
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-** DELETED  CONFIGURATION DIRECTIVES **