Initial Anope Import

git-svn-id: svn://svn.anope.org/anope/trunk@1 31f1291d-b8d6-0310-a050-a5561fc1590b


git-svn-id: http://anope.svn.sourceforge.net/svnroot/anope/trunk@1 5417fbe8-f217-4b02-8779-1006273d7864

1 files changed, 428 insertions, 0 deletions

diff --git a/Changes.conf b/Changes.conf
new file mode 100644
index 000000000..e3f68fb5b
--- /dev/null
+++ b/Changes.conf
@@ -0,0 +1,428 @@
+Anope Version 1.6.0
+--------------------
+** ADDED CONFIGURATION DIRECTIVES **
+
+###########################################################################
+#
+# DefCon configuration
+#
+###########################################################################
+# DefConLevel <level> [OPTIONAL]
+#     Default defcon level (1-5) to use when starting services up, level 5
+#     instructs services to run as normal.
+
+#DefConLevel 5
+
+# DefCon1-4 <numeric> [REQUIRED if Defcon is activated]
+#     These numercics determine which of the following operations take place
+#     at each level, the correct numeric can be found by adding together the
+#     number for each restriction you wish to place at a level.
+#     No new channel registrations			1
+#     No New Nick Registrations				2
+#     No MLOCK changes 					4
+#     Force Chan Mode					8
+#     Use Reduced Session Limit				16
+#     KILL any new clients trying to connect		32
+#     Services will ignore everyone but opers		64
+#     Services will silently ignore everyone but opers	128
+#     AKILL all new clients trying to connect		256
+#     No new memos sent to block memoserv attacks	512
+
+#DefCon4 23
+#     No channel reg + No Nick Reg + No MLOCK changes + Use Reduced Session Limit
+#           1        +      2      +         4        +            16
+
+#DefCon3 31
+#     As DefCon4 + Services will Force Chan Mode's on channels
+#          23    +                     8
+
+#DefCon2 159
+#     As DefCon3 + Services will silently ignore everyone but opers
+#          32    +                    128
+
+#DefCon1 415
+#     As DefCon2 + AKILL all new clients trying to connect
+#          159   +                  256
+
+# DefConSessionLimit <limit> [REQUIRED if DefCon is activated]
+#     New session limit to use when a defcon level is using "reduced"
+#     session limiting.
+#     NOTE: When using DefCon this value needs to be defined
+#DefConSessionLimit 2
+
+# DefConAkillExpire <time> [REQUIRED if DefCon is activated]
+#     Length of time to add the AKILL for when DEFCON is preventing
+#     all new clients from connecting to the network
+#
+#     NOTE: As with all expire times, the expirey check will only be
+#     carried out once every "ExpireTimeout" so if this setting is
+#     30m the the akill could last for 30m regardless of this setting.
+#
+#     NOTE: When using DefCon this value needs to be defined
+#DefConAkillExpire 5m
+
+# DefConChanModes <modes> [REQUIRED if DefCon is activated]
+#     The channel modes to set on all channel's when the DefCon channel
+#     mode system is in use.
+#
+#     NOTE: Choose these modes carefully, because when defcon switches to
+#     a level which does NOT have the mode setting selected, services will
+#     set the reverse on all channel's, e.g. if this setting is +RN
+#     when defcon is used all channel's will be set to +RN, when
+#     defcon is removed, channels will all be set to -RN. You don't
+#     want to set this to +k for example because when defcon is removed all
+#     channels will -k.
+#     NOTE: mlock'ed modes will not be lost
+#DefConChanModes "+R"
+
+# DefConTimeOut <time> [OPTIONAL]
+#     This value can be used to automaticaly return the network to
+#     defcon 5 after the specified time period - just in case any opers
+#     forget to remove a defcon setting.
+#DefConTimeOut 15m
+
+# GlobalOnDefcon [OPTIONAL]
+#
+#     Setting this directive will make Services send a global message on
+#     Defcon Level changes.
+#GlobalOnDefcon
+
+# GlobalOnDefconMore [OPTIONAL]
+#
+#     Setting this directive will make Services send a global message on
+#     Defcon Level changes. Uncommenting this will allow you to send along
+#     with the new level, the DefconMessage.
+#GlobalOnDefconMore
+
+#DefconMessage "Put your message to send your users here. Dont forget to uncomment GlobalOnDefconMore"
+
+# DefConOffMessage [OPTIONAL]
+#
+#     If this is defined, it will be used in place of GlobalOnDefcon and
+#     GlobalOnDefconMore when defcon is returned to level 5
+#DefConOffMessage "Services are now back to normal, sorry for any inconvenience"
+
+# DefConAkillReason <text> [REQUIRED if DefCon is activated]
+#
+#     When using DEFCON this setting will be used when any clients are killed
+#     or akilled from the network by defcon
+#
+#DefConAkillReason "This network is currently not accepting connections, please try again later"
+
+###########################################################################
+#
+# MySQL configuration
+#
+###########################################################################
+#
+# Mysql [OPTIONAL]
+#
+#     Your MySQL configuration for use with Anope.
+#     To disable MySQL functionality, just comment out this block.
+#     To make use of MySQL use these directives and change their
+#     setting to the appropiate values.
+#
+#     MysqlHost defines the Mysql server hostname.
+#     MysqlUser defines the Mysql user to log in with.
+#     MysqlPass defines the Mysql pass required for the specified user to log in.
+#     MysqlName defines the Mysql database name Anope uses
+#     MysqlSock defines the Mysql UNIX socket
+#     MysqlPort defines the Mysql TCP port
+#
+#MysqlHost "localhost"
+#MysqlUser "Anonymous"
+#MysqlPass ""
+#MysqlName "anope"
+#MysqlSock "/tmp/mysql.sock"
+#MysqlPort 3306
+
+# MysqlSecure "<des>|<md5>|<sha>|<key>" [OPTIONAL]
+#
+#    Method for storing passwords on MySQL. Available methods are: 
+#    Empty or not set will save your passwords as clear text.
+#    des  : Encrypt using a simple DES algorithm.
+#    md5  : Produces the md5 hash for the password.
+#    sha  : Calculates the checksum using a Secure Hash Algorithm.
+#    key  : Encodes using "key" as password.
+#    Please read docs/MYSQL file for more info and details.
+#
+#MysqlSecure ""
+
+# MysqlRetries <value>      [OPTIONAL]
+# MysqlRetryGap <value>     [OPTIONAL]
+#
+#    These values let you define how often and with how much interruption Anope
+#    shall retry to open a connection when losing the contact to the mysql db.
+#    The product of these values must be between 1 and 60.
+#
+#MysqlRetries 10
+#MysqlRetryGap 1
+
+###########################################################################
+#
+# Module configuration
+#
+###########################################################################
+#
+# ModuleAutoload [OPTIONAL]
+#
+# When compiled with module support, this contains a space seperated list
+# of modules to automaticaly load as soon as possible, e.g. IRCD support modules.
+#
+#ModuleAutoload "hs_moo ircd_defizzer"
+
+# ModuleDelayedAutoload [OPTIONAL]
+#
+# When compiled with module support, this contains a space seperated list
+# of modules to automaticaly load when services are ready for new clients.
+# e.g. new pesudo clients such as CatServ :-) *meow*
+#
+#ModuleDelayedAutoload "ircd_catserv"
+
+###########################################################################
+#
+# Misc configuration
+#
+###########################################################################
+# AnonymousGlobal [OPTIONAL]
+#     hides the oper's nick in a globalmsg
+#AnonymousGlobal
+
+# DontQuoteAddresses [OPTIONAL]
+#
+# When enabled, services will not attempt to "" the TO: fields in mails
+#
+# So far we only know of ESMTP which needs this set.
+#
+#DontQuoteAddresses
+
+#     If services can't connect to the RemoteServer, they will try
+#     RemoteServer2 (if defined). If they can't connect to RemoteServer2,
+#     they will use RemoteServer3 (if defined).
+RemoteServer    localhost 6667 "mypass"
+#RemoteServer2    localhost 6667 "mypass"
+#RemoteServer3   localhost 6667 "mypass"
+
+# NSRestrictGetPass  [OPTIONAL]
+# 
+# When enabled, services will only allow Services Root to use the getpass
+# command on a nick.
+#
+#NSRestrictGetPass
+
+# CSRestrictGetPass  [OPTIONAL]
+# 
+# When enabled, services will only allow Services Root to use the getpass
+# command on a channel.
+#
+#CSRestrictGetPass
+
+# CSOpersOnly [OPTIONAL]
+#     If this is defined, only IRC Operators will be permitted to use ChanServ.
+#CSOpersOnly
+
+# GlobalOnCycleMessage <text> [OPTIONAL]
+#
+#     This is the message to global when using GlobalOnCycle
+#GlobalOnCycleMEssage "Services are restarting, they will be back shortley - please be good while were gone"
+
+# GlobalOnCycleUP <text> [OPTIONAL]
+#
+#     if defined, this string will be globaled when services join the network
+#GlobalOnCycleUP "Services are now back online - have a nice day"
+
+# ChanKillExpiry <time> [REQUIRED]
+# Default /OS CHANKILL expire time
+ChanKillExpiry  7d
+
+# HostSetters <nicks>  [DISCOURAGED]
+#    Specifies the nicks of NON-OPERS allowed to Set/Remove vHosts using
+#    HostServ.  Can be re-loaded with /msg operserv reload
+#    You can specify more than one nick by separating each one by a space.
+#
+#    make sure you insert the correct nick(s) here..
+#HostSetters "rob dengel certus"
+
+Anope Version 1.4.18
+--------------------
+** ADDED    CONFIGURATION DIRECTIVES **
+# PreNickServDB prenick.db
+
+# NSEmailReg [OPTIONAL]
+#      This option splits the nick registration into 2 steps,  the first
+#      after registering a email with a passcode is sent to the supplied
+#      email address, this passcode needs to be entered with a confirm
+#      command before the nick registration will be completed.
+#
+#      You must have mail / forcemail set for this to work correctly.
+#      It is also recommended that MailDelay be set to a sensible value
+#      to prevent mail flooding
+
+# NSEmailReg
+
+# NSRExpire <time> [OPTIONAL]
+#     Sets the length of time a user gets to enter the confirmation code
+#     which has been e-mailed to them before the nick will be relased
+#     for general use again
+
+# NSRExpire 1d
+
+# NSModeOnID  [OPTIONAL]
+#
+# When enabled, services will set channel modes a user has when they identify
+#
+
+# NSModeOnID
+
+# HideStatsO [OPTIONAL]
+#    
+#    Setting this directive will make Services only show Stats O to
+#    IRC Operators.
+
+#HideStatsO
+ 
+# GlobalOnCycle [OPTIONAL]
+#
+#    Setting this directive will make Services send global messages on
+#    starting up and shuting down/restarting.
+ 
+#GlobalOnCycle
+
+** MODIFIED CONFIGURATION DIRECTIVES **
+# NetworkDomain <name> [OPTIONAL]
+#
+#     If your network has a common domain name, specify it there (for
+#     example, all IRCZONE servers have a name ending in ".irczone.cl",
+#     so "irczone.cl" would be set there. It will be used by the OperServ 
+#     GLOBAL command, and if you don't have a common domain name, this 
+#     command may just not work.
+#
+#     You can specify more than one Network Domain by separating each one by
+#     a space: NetworkDomain "localnet.net localnet.com"
+NetworkDomain "localnet.com"
+
+AnopeVersion 1.4.26
+--------------------------
+** ADDED    CONFIGURATION DIRECTIVES **
+# DontQuoteAddresses [OPTIONAL]
+#
+# When enabled, services will not attempt to "" the to fields in mails
+#
+# So far we only know of ESMTP which needs this set.
+#
+
+#DontQuoteAddresses
+
+Anope Version 1.4.18
+--------------------
+** ADDED    CONFIGURATION DIRECTIVES **
+# PreNickServDB prenick.db
+
+# NSEmailReg [OPTIONAL]
+#      This option splits the nick registration into 2 steps,  the first
+#      after registering a email with a passcode is sent to the supplied
+#      email address, this passcode needs to be entered with a confirm
+#      command before the nick registration will be completed.
+#
+#      You must have mail / forcemail set for this to work correctly.
+#      It is also recommended that MailDelay be set to a sensible value
+#      to prevent mail flooding
+
+# NSEmailReg
+
+# NSRExpire <time> [OPTIONAL]
+#     Sets the length of time a user gets to enter the confirmation code
+#     which has been e-mailed to them before the nick will be relased
+#     for general use again
+
+# NSRExpire 1d
+
+# NSModeOnID  [OPTIONAL]
+#
+# When enabled, services will set channel modes a user has when they identify
+#
+
+# NSModeOnID
+
+# HideStatsO [OPTIONAL]
+#    
+#    Setting this directive will make Services only show Stats O to
+#    IRC Operators.
+
+#HideStatsO
+ 
+# GlobalOnCycle [OPTIONAL]
+#
+#    Setting this directive will make Services send global messages on
+#    starting up and shuting down/restarting.
+ 
+#GlobalOnCycle
+
+Anope Version 1.4.16
+--------------------
+** ADDED    CONFIGURATION DIRECTIVES **
+HostServName	"HostServ"  "vHost Server"
+HostServDB     hosts.db
+HostServAlias  "HostServ2" "Vhostname Server Forwarder"
+
+** MODIFIED CONFIGURATION DIRECTIVES **
+
+# ForceForbidReason [OPTIONAL]
+#
+#     If set, Services will require a reason when a forbid is added, else
+#     the reason is optional. This directive also applies to SUSPENDed
+#     channels as well.
+
+ForceForbidReason
+
+** DELETED  CONFIGURATION DIRECTIVES **
+
+Anope Version 1.4.15
+--------------------
+** ADDED    CONFIGURATION DIRECTIVES **
+
+# ...Alias <nick> <string>  [OPTIONAL]
+#     Specify alternate nicknames for services. When a user will /msg 
+#     NickServAlias sthing, it will be forwarded to NickServName, and
+#     NickServName will answer. This can be used to ease the migration
+#     from another network, for example if your services are called
+#     NickKeeper, ChanKeeper, etc ... and the other network calls them
+#     NickServ, ChanServ, etc ...
+
+NickServAlias    "NickServ2"  "Nickname Server Forwarder"
+ChanServAlias    "ChanServ2"  "Channel Server Forwarder"
+MemoServAlias    "MemoServ2"  "Memo Server Forwarder"
+BotServAlias     "BotServ2"   "Bot Server Forwarder"
+HelpServAlias    "HelpServ2"  "Help Server Forwarder"
+OperServAlias    "OperServ2"  "Operator Server Forwarder"
+GlobalAlias      "Global2"    "Global Noticer Forwarder"
+#DevNullName     "DevNull2"   "/dev/null -- message sink Forwarder"
+
+# LogChannel <channel> [OPTIONAL]
+#
+#     When defined, services will output log messages to this channel.
+#     IMPORTANT: This can be a security risk so make certain this channel
+#     is sufficiently protected from normal access.
+
+#LogChannel "#services"
+
+# LogChannel [OPTIONAL]
+#
+#     When defined, services will output all BotServ chatter to the defined
+#     LogChan above. It shows all uses of BotServ ACT and SAY commands. Note
+#     that there is no logging to the log file. Only works is LogChannel is
+#     also defined.
+
+#LogBot
+
+# SuperAdmin  [OPTIONAL]
+#    Having this flag enabled will turn all Services Admin to have Founder
+#    level on *all* registered channels.
+
+#SuperAdmin
+
+# AddAkiller [OPTIONAL]
+#     Adds the nickname of the Operator issuing an AKILL to the kill reason.
+#
+
+AddAkiller