From 32b50b32d3f0dd26bf935f109cea7a1ef3e64658 Mon Sep 17 00:00:00 2001
From: "dane dane@31f1291d-b8d6-0310-a050-a5561fc1590b"
 <dane dane@31f1291d-b8d6-0310-a050-a5561fc1590b@5417fbe8-f217-4b02-8779-1006273d7864>
Date: Mon, 29 Mar 2004 02:54:09 +0000
Subject: BUILD : 1.7.0 (8) BUGS : none. NOTES : Made
 svn://zero.org/repos/anope/trunk the 1.7 development stream.

git-svn-id: svn://svn.anope.org/anope/trunk@8 31f1291d-b8d6-0310-a050-a5561fc1590b


git-svn-id: http://anope.svn.sourceforge.net/svnroot/anope/trunk@4 5417fbe8-f217-4b02-8779-1006273d7864
---
 Changes.conf | 425 +----------------------------------------------------------
 1 file changed, 1 insertion(+), 424 deletions(-)

(limited to 'Changes.conf')

diff --git a/Changes.conf b/Changes.conf
index e3f68fb5b..d5a04b70f 100644
--- a/Changes.conf
+++ b/Changes.conf
@@ -1,428 +1,5 @@
-Anope Version 1.6.0
---------------------
-** ADDED CONFIGURATION DIRECTIVES **
-
-###########################################################################
-#
-# DefCon configuration
-#
-###########################################################################
-# DefConLevel <level> [OPTIONAL]
-#     Default defcon level (1-5) to use when starting services up, level 5
-#     instructs services to run as normal.
-
-#DefConLevel 5
-
-# DefCon1-4 <numeric> [REQUIRED if Defcon is activated]
-#     These numercics determine which of the following operations take place
-#     at each level, the correct numeric can be found by adding together the
-#     number for each restriction you wish to place at a level.
-#     No new channel registrations			1
-#     No New Nick Registrations				2
-#     No MLOCK changes 					4
-#     Force Chan Mode					8
-#     Use Reduced Session Limit				16
-#     KILL any new clients trying to connect		32
-#     Services will ignore everyone but opers		64
-#     Services will silently ignore everyone but opers	128
-#     AKILL all new clients trying to connect		256
-#     No new memos sent to block memoserv attacks	512
-
-#DefCon4 23
-#     No channel reg + No Nick Reg + No MLOCK changes + Use Reduced Session Limit
-#           1        +      2      +         4        +            16
-
-#DefCon3 31
-#     As DefCon4 + Services will Force Chan Mode's on channels
-#          23    +                     8
-
-#DefCon2 159
-#     As DefCon3 + Services will silently ignore everyone but opers
-#          32    +                    128
-
-#DefCon1 415
-#     As DefCon2 + AKILL all new clients trying to connect
-#          159   +                  256
-
-# DefConSessionLimit <limit> [REQUIRED if DefCon is activated]
-#     New session limit to use when a defcon level is using "reduced"
-#     session limiting.
-#     NOTE: When using DefCon this value needs to be defined
-#DefConSessionLimit 2
-
-# DefConAkillExpire <time> [REQUIRED if DefCon is activated]
-#     Length of time to add the AKILL for when DEFCON is preventing
-#     all new clients from connecting to the network
-#
-#     NOTE: As with all expire times, the expirey check will only be
-#     carried out once every "ExpireTimeout" so if this setting is
-#     30m the the akill could last for 30m regardless of this setting.
-#
-#     NOTE: When using DefCon this value needs to be defined
-#DefConAkillExpire 5m
-
-# DefConChanModes <modes> [REQUIRED if DefCon is activated]
-#     The channel modes to set on all channel's when the DefCon channel
-#     mode system is in use.
-#
-#     NOTE: Choose these modes carefully, because when defcon switches to
-#     a level which does NOT have the mode setting selected, services will
-#     set the reverse on all channel's, e.g. if this setting is +RN
-#     when defcon is used all channel's will be set to +RN, when
-#     defcon is removed, channels will all be set to -RN. You don't
-#     want to set this to +k for example because when defcon is removed all
-#     channels will -k.
-#     NOTE: mlock'ed modes will not be lost
-#DefConChanModes "+R"
-
-# DefConTimeOut <time> [OPTIONAL]
-#     This value can be used to automaticaly return the network to
-#     defcon 5 after the specified time period - just in case any opers
-#     forget to remove a defcon setting.
-#DefConTimeOut 15m
-
-# GlobalOnDefcon [OPTIONAL]
-#
-#     Setting this directive will make Services send a global message on
-#     Defcon Level changes.
-#GlobalOnDefcon
-
-# GlobalOnDefconMore [OPTIONAL]
-#
-#     Setting this directive will make Services send a global message on
-#     Defcon Level changes. Uncommenting this will allow you to send along
-#     with the new level, the DefconMessage.
-#GlobalOnDefconMore
-
-#DefconMessage "Put your message to send your users here. Dont forget to uncomment GlobalOnDefconMore"
-
-# DefConOffMessage [OPTIONAL]
-#
-#     If this is defined, it will be used in place of GlobalOnDefcon and
-#     GlobalOnDefconMore when defcon is returned to level 5
-#DefConOffMessage "Services are now back to normal, sorry for any inconvenience"
-
-# DefConAkillReason <text> [REQUIRED if DefCon is activated]
-#
-#     When using DEFCON this setting will be used when any clients are killed
-#     or akilled from the network by defcon
-#
-#DefConAkillReason "This network is currently not accepting connections, please try again later"
-
-###########################################################################
-#
-# MySQL configuration
-#
-###########################################################################
-#
-# Mysql [OPTIONAL]
-#
-#     Your MySQL configuration for use with Anope.
-#     To disable MySQL functionality, just comment out this block.
-#     To make use of MySQL use these directives and change their
-#     setting to the appropiate values.
-#
-#     MysqlHost defines the Mysql server hostname.
-#     MysqlUser defines the Mysql user to log in with.
-#     MysqlPass defines the Mysql pass required for the specified user to log in.
-#     MysqlName defines the Mysql database name Anope uses
-#     MysqlSock defines the Mysql UNIX socket
-#     MysqlPort defines the Mysql TCP port
-#
-#MysqlHost "localhost"
-#MysqlUser "Anonymous"
-#MysqlPass ""
-#MysqlName "anope"
-#MysqlSock "/tmp/mysql.sock"
-#MysqlPort 3306
-
-# MysqlSecure "<des>|<md5>|<sha>|<key>" [OPTIONAL]
-#
-#    Method for storing passwords on MySQL. Available methods are: 
-#    Empty or not set will save your passwords as clear text.
-#    des  : Encrypt using a simple DES algorithm.
-#    md5  : Produces the md5 hash for the password.
-#    sha  : Calculates the checksum using a Secure Hash Algorithm.
-#    key  : Encodes using "key" as password.
-#    Please read docs/MYSQL file for more info and details.
-#
-#MysqlSecure ""
-
-# MysqlRetries <value>      [OPTIONAL]
-# MysqlRetryGap <value>     [OPTIONAL]
-#
-#    These values let you define how often and with how much interruption Anope
-#    shall retry to open a connection when losing the contact to the mysql db.
-#    The product of these values must be between 1 and 60.
-#
-#MysqlRetries 10
-#MysqlRetryGap 1
-
-###########################################################################
-#
-# Module configuration
-#
-###########################################################################
-#
-# ModuleAutoload [OPTIONAL]
-#
-# When compiled with module support, this contains a space seperated list
-# of modules to automaticaly load as soon as possible, e.g. IRCD support modules.
-#
-#ModuleAutoload "hs_moo ircd_defizzer"
-
-# ModuleDelayedAutoload [OPTIONAL]
-#
-# When compiled with module support, this contains a space seperated list
-# of modules to automaticaly load when services are ready for new clients.
-# e.g. new pesudo clients such as CatServ :-) *meow*
-#
-#ModuleDelayedAutoload "ircd_catserv"
-
-###########################################################################
-#
-# Misc configuration
-#
-###########################################################################
-# AnonymousGlobal [OPTIONAL]
-#     hides the oper's nick in a globalmsg
-#AnonymousGlobal
-
-# DontQuoteAddresses [OPTIONAL]
-#
-# When enabled, services will not attempt to "" the TO: fields in mails
-#
-# So far we only know of ESMTP which needs this set.
-#
-#DontQuoteAddresses
-
-#     If services can't connect to the RemoteServer, they will try
-#     RemoteServer2 (if defined). If they can't connect to RemoteServer2,
-#     they will use RemoteServer3 (if defined).
-RemoteServer    localhost 6667 "mypass"
-#RemoteServer2    localhost 6667 "mypass"
-#RemoteServer3   localhost 6667 "mypass"
-
-# NSRestrictGetPass  [OPTIONAL]
-# 
-# When enabled, services will only allow Services Root to use the getpass
-# command on a nick.
-#
-#NSRestrictGetPass
-
-# CSRestrictGetPass  [OPTIONAL]
-# 
-# When enabled, services will only allow Services Root to use the getpass
-# command on a channel.
-#
-#CSRestrictGetPass
-
-# CSOpersOnly [OPTIONAL]
-#     If this is defined, only IRC Operators will be permitted to use ChanServ.
-#CSOpersOnly
-
-# GlobalOnCycleMessage <text> [OPTIONAL]
-#
-#     This is the message to global when using GlobalOnCycle
-#GlobalOnCycleMEssage "Services are restarting, they will be back shortley - please be good while were gone"
-
-# GlobalOnCycleUP <text> [OPTIONAL]
-#
-#     if defined, this string will be globaled when services join the network
-#GlobalOnCycleUP "Services are now back online - have a nice day"
-
-# ChanKillExpiry <time> [REQUIRED]
-# Default /OS CHANKILL expire time
-ChanKillExpiry  7d
-
-# HostSetters <nicks>  [DISCOURAGED]
-#    Specifies the nicks of NON-OPERS allowed to Set/Remove vHosts using
-#    HostServ.  Can be re-loaded with /msg operserv reload
-#    You can specify more than one nick by separating each one by a space.
-#
-#    make sure you insert the correct nick(s) here..
-#HostSetters "rob dengel certus"
-
-Anope Version 1.4.18
+Anope Version 1.7.0
 --------------------
 ** ADDED    CONFIGURATION DIRECTIVES **
-# PreNickServDB prenick.db
-
-# NSEmailReg [OPTIONAL]
-#      This option splits the nick registration into 2 steps,  the first
-#      after registering a email with a passcode is sent to the supplied
-#      email address, this passcode needs to be entered with a confirm
-#      command before the nick registration will be completed.
-#
-#      You must have mail / forcemail set for this to work correctly.
-#      It is also recommended that MailDelay be set to a sensible value
-#      to prevent mail flooding
-
-# NSEmailReg
-
-# NSRExpire <time> [OPTIONAL]
-#     Sets the length of time a user gets to enter the confirmation code
-#     which has been e-mailed to them before the nick will be relased
-#     for general use again
-
-# NSRExpire 1d
-
-# NSModeOnID  [OPTIONAL]
-#
-# When enabled, services will set channel modes a user has when they identify
-#
-
-# NSModeOnID
-
-# HideStatsO [OPTIONAL]
-#    
-#    Setting this directive will make Services only show Stats O to
-#    IRC Operators.
-
-#HideStatsO
- 
-# GlobalOnCycle [OPTIONAL]
-#
-#    Setting this directive will make Services send global messages on
-#    starting up and shuting down/restarting.
- 
-#GlobalOnCycle
-
 ** MODIFIED CONFIGURATION DIRECTIVES **
-# NetworkDomain <name> [OPTIONAL]
-#
-#     If your network has a common domain name, specify it there (for
-#     example, all IRCZONE servers have a name ending in ".irczone.cl",
-#     so "irczone.cl" would be set there. It will be used by the OperServ 
-#     GLOBAL command, and if you don't have a common domain name, this 
-#     command may just not work.
-#
-#     You can specify more than one Network Domain by separating each one by
-#     a space: NetworkDomain "localnet.net localnet.com"
-NetworkDomain "localnet.com"
-
-AnopeVersion 1.4.26
---------------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-# DontQuoteAddresses [OPTIONAL]
-#
-# When enabled, services will not attempt to "" the to fields in mails
-#
-# So far we only know of ESMTP which needs this set.
-#
-
-#DontQuoteAddresses
-
-Anope Version 1.4.18
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-# PreNickServDB prenick.db
-
-# NSEmailReg [OPTIONAL]
-#      This option splits the nick registration into 2 steps,  the first
-#      after registering a email with a passcode is sent to the supplied
-#      email address, this passcode needs to be entered with a confirm
-#      command before the nick registration will be completed.
-#
-#      You must have mail / forcemail set for this to work correctly.
-#      It is also recommended that MailDelay be set to a sensible value
-#      to prevent mail flooding
-
-# NSEmailReg
-
-# NSRExpire <time> [OPTIONAL]
-#     Sets the length of time a user gets to enter the confirmation code
-#     which has been e-mailed to them before the nick will be relased
-#     for general use again
-
-# NSRExpire 1d
-
-# NSModeOnID  [OPTIONAL]
-#
-# When enabled, services will set channel modes a user has when they identify
-#
-
-# NSModeOnID
-
-# HideStatsO [OPTIONAL]
-#    
-#    Setting this directive will make Services only show Stats O to
-#    IRC Operators.
-
-#HideStatsO
- 
-# GlobalOnCycle [OPTIONAL]
-#
-#    Setting this directive will make Services send global messages on
-#    starting up and shuting down/restarting.
- 
-#GlobalOnCycle
-
-Anope Version 1.4.16
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-HostServName	"HostServ"  "vHost Server"
-HostServDB     hosts.db
-HostServAlias  "HostServ2" "Vhostname Server Forwarder"
-
-** MODIFIED CONFIGURATION DIRECTIVES **
-
-# ForceForbidReason [OPTIONAL]
-#
-#     If set, Services will require a reason when a forbid is added, else
-#     the reason is optional. This directive also applies to SUSPENDed
-#     channels as well.
-
-ForceForbidReason
-
 ** DELETED  CONFIGURATION DIRECTIVES **
-
-Anope Version 1.4.15
---------------------
-** ADDED    CONFIGURATION DIRECTIVES **
-
-# ...Alias <nick> <string>  [OPTIONAL]
-#     Specify alternate nicknames for services. When a user will /msg 
-#     NickServAlias sthing, it will be forwarded to NickServName, and
-#     NickServName will answer. This can be used to ease the migration
-#     from another network, for example if your services are called
-#     NickKeeper, ChanKeeper, etc ... and the other network calls them
-#     NickServ, ChanServ, etc ...
-
-NickServAlias    "NickServ2"  "Nickname Server Forwarder"
-ChanServAlias    "ChanServ2"  "Channel Server Forwarder"
-MemoServAlias    "MemoServ2"  "Memo Server Forwarder"
-BotServAlias     "BotServ2"   "Bot Server Forwarder"
-HelpServAlias    "HelpServ2"  "Help Server Forwarder"
-OperServAlias    "OperServ2"  "Operator Server Forwarder"
-GlobalAlias      "Global2"    "Global Noticer Forwarder"
-#DevNullName     "DevNull2"   "/dev/null -- message sink Forwarder"
-
-# LogChannel <channel> [OPTIONAL]
-#
-#     When defined, services will output log messages to this channel.
-#     IMPORTANT: This can be a security risk so make certain this channel
-#     is sufficiently protected from normal access.
-
-#LogChannel "#services"
-
-# LogChannel [OPTIONAL]
-#
-#     When defined, services will output all BotServ chatter to the defined
-#     LogChan above. It shows all uses of BotServ ACT and SAY commands. Note
-#     that there is no logging to the log file. Only works is LogChannel is
-#     also defined.
-
-#LogBot
-
-# SuperAdmin  [OPTIONAL]
-#    Having this flag enabled will turn all Services Admin to have Founder
-#    level on *all* registered channels.
-
-#SuperAdmin
-
-# AddAkiller [OPTIONAL]
-#     Adds the nickname of the Operator issuing an AKILL to the kill reason.
-#
-
-AddAkiller
-- 
cgit