From fc32ae6b425e845c2b7dc43b2c618d6dfb947cf1 Mon Sep 17 00:00:00 2001 From: Peter Powell Date: Tue, 18 Aug 2015 04:35:16 +0100 Subject: Rename "example.conf" to "anope.example.conf". --- data/anope.example.conf | 1201 +++++++++++++++++++++++++++++++++++++++++++++++ data/example.conf | 1201 ----------------------------------------------- 2 files changed, 1201 insertions(+), 1201 deletions(-) create mode 100644 data/anope.example.conf delete mode 100644 data/example.conf (limited to 'data') diff --git a/data/anope.example.conf b/data/anope.example.conf new file mode 100644 index 000000000..a09ce2378 --- /dev/null +++ b/data/anope.example.conf @@ -0,0 +1,1201 @@ +/* + * Example configuration file for Services. After making the appropriate + * changes to this file, place it in the Services conf directory (as + * specified in the "configure" script, default /home/username/anope/conf) + * under the name "anope.conf". + * + * The format of this file is fairly simple: three types of comments are supported: + * - All text after a '#' on a line is ignored, as in shell scripting + * - All text after '//' on a line is ignored, as in C++ + * - A block of text like this one is ignored, as in C + * + * Outside of comments, there are three structures: blocks, keys, and values. + * + * A block is a named container, which contains a number of key to value pairs + * - you may think of this as an array. + * + * A block is created like so: + * foobar + * { + * moo = "cow" + * foo = bar + * } + * + * Note that nameless blocks are allowed and are often used with comments to allow + * easily commenting an entire block, for example: + * #foobar + * { + * moo = "cow" + * foo = bar + * } + * is an entirely commented block. + * + * Keys are case insensitive. Values depend on what key - generally, information is + * given in the key comment. The quoting of values (and most other syntax) is quite + * flexible, however, please do not forget to quote your strings: + * + * "This is a parameter string with spaces in it" + * + * If you need to include a double quote inside a quoted string, precede it + * by a backslash: + * + * "This string has \"double quotes\" in it" + * + * Time parameters can be specified either as an integer representing a + * number of seconds (e.g. "3600" = 1 hour), or as an integer with a unit + * specifier: "s" = seconds, "m" = minutes, "h" = hours, "d" = days. + * Combinations (such as "1h30m") are not permitted. Examples (all of which + * represent the same length of time, one day): + * + * "86400", "86400s", "1440m", "24h", "1d" + * + * In the documentation for each directive, one of the following will be + * included to indicate whether an option is required: + * + * [REQUIRED] + * Indicates a directive which must be given. Without it, Services will + * not start. + * + * [RECOMMENDED] + * Indicates a directive which may be omitted, but omitting it may cause + * undesirable side effects. + * + * [OPTIONAL] + * Indicates a directive which is optional. If not given, the feature + * will typically be disabled. If this is not the case, more + * information will be given in the documentation. + * + * [DISCOURAGED] + * Indicates a directive which may cause undesirable side effects if + * specified. + * + * [DEPRECATED] + * Indicates a directive which will disappear in a future version of + * Services, usually because its functionality has been either + * superseded by that of other directives or incorporated into the main + * program. + */ + +/* + * [OPTIONAL] Defines + * + * You can define values to other values, which can be used to easily change + * many values in the configuration. at once. + */ + +/* + * The services.host define is used in multiple different locations throughout the + * configuration for services clients hostnames. + */ +define +{ + name = "services.host" + value = "services.localhost.net" +} + +/* + * [OPTIONAL] Additional Includes + * + * You can include additional configuration files here. + * You may also include executable files, which will be executed and + * the output from it will be included into your configuration. + */ + +#include +{ + type = "file" + name = "some.conf" +} + +#include +{ + type = "executable" + name = "/usr/bin/wget -q -O - http://some.misconfigured.network.com/anope.conf" +} + +/* + * [REQUIRED] IRCd Config + * + * This section is used to set up Anope to connect to your IRC network. + * This section can be included multiple times, and Anope will attempt to + * connect to each server until it finally connects. + * + * Each uplink IRCd should have a corresponding configuration to allow Services + * to link to it. + * + * An example configuration for InspIRCd that is compatible with the below uplink + * and serverinfo configuration would look like: + * + * + * + * + * + * An example configuration for UnrealIRCd that is compatible with the below uplink + * and serverinfo configuration would look like: + * + * link services.localhost.net + * { + * username *; + * hostname *; + * bind-ip "127.0.0.1"; + * port 7000; + * hub *; + * password-connect "mypassword"; + * password-receive "mypassword"; + * class servers; + * }; + * ulines { services.localhost.net; }; + * listen 127.0.0.1:7000; + */ +uplink +{ + /* + * The IP or hostname of the IRC server you wish to connect Services to. + * Usually, you will want to connect Services over 127.0.0.1 (aka localhost). + * + * NOTE: On some shell providers, this will not be an option. + */ + host = "127.0.0.1" + + /* + * Enable if Services should connect using IPv6. + */ + ipv6 = no + + /* + * Enable if Services should connect using SSL. + * You must have an SSL module loaded for this to work. + */ + ssl = no + + /* + * The port to connect to. + * The IRCd *MUST* be configured to listen on this port, and to accept + * server connections. + * + * Refer to your IRCd documentation for how this is to be done. + */ + port = 7000 + + /* + * The password to send to the IRC server for authentication. + * This must match the link block on your IRCd. + * + * Refer to your IRCd documentation for more information on link blocks. + */ + password = "mypassword" +} + +/* + * [REQUIRED] Server Information + * + * This section contains information about the Services server. + */ +serverinfo +{ + /* + * The hostname that Services will be seen as, it must have no conflicts with any + * other server names on the rest of your IRC network. Note that it does not have + * to be an existing hostname, just one that isn't on your network already. + */ + name = "services.localhost.net" + + /* + * The text which should appear as the server's information in /whois and similar + * queries. + */ + description = "Services for IRC Networks" + + /* + * The local address that Services will bind to before connecting to the remote + * server. This may be useful for multihomed hosts. If omitted, Services will let + * the Operating System choose the local address. This directive is optional. + * + * If you don't know what this means or don't need to use it, just leave this + * directive commented out. + */ + #localhost = "nowhere." + + /* + * What Server ID to use for this connection? + * Note: This should *ONLY* be used for TS6/P10 IRCds. Refer to your IRCd documentation + * to see if this is needed. + */ + #id = "00A" + + /* + * The filename containing the Services process ID. The path is relative to the + * services root directory. + */ + pid = "data/anope.pid" + + /* + * The filename containing the Message of the Day. The path is relative to the + * services root directory. + */ + motd = "conf/motd.txt" +} + +/* + * [REQUIRED] Protocol configuration. + * + * This directive tells Anope which IRCd Protocol to speak when connecting. + * You MUST modify this to match the IRCd you run. You may want to modify + * the protocol configuration file to tune protocol specific features. + * + * Supported: + * - bahamut + * - charybdis + * - hybrid + * - inspircd20 + * - ngircd + * - plexus + * - ratbox + * - unreal + */ +include +{ + name = "inspircd20.example.conf" +} + +/* + * [REQUIRED] Network Information + * + * This section contains information about the IRC network that Services will be + * connecting to. + */ +networkinfo +{ + /* + * This is the name of the network that Services will be running on. + */ + networkname = "LocalNet" + + /* + * Set this to the maximum allowed nick length on your network. + * Be sure to set this correctly, as setting this wrong can result in + * Services being disconnected from the network. + */ + nicklen = 31 + + /* Set this to the maximum allowed ident length on your network. + * Be sure to set this correctly, as setting this wrong can result in + * Services being disconnected from the network. + */ + userlen = 10 + + /* Set this to the maximum allowed hostname length on your network. + * Be sure to set this correctly, as setting this wrong can result in + * Services being disconnected from the network. + */ + hostlen = 64 + + /* Set this to the maximum allowed channel length on your network. + */ + chanlen = 32 + + /* The maximum number of list modes settable on a channel (such as b, e, I). + * Comment out or set to 0 to disable. + */ + modelistsize = 100 + + /* + * Characters allowed in nicknames. This always includes the characters described + * in RFC1459, and so does not need to be set for normal behavior. Changing this to + * include characters your IRCd doesn't support will cause your IRCd and/or Services + * to break. Multibyte characters are not supported, nor are escape sequences. + * + * It is recommended you DON'T change this. + */ + #nick_chars = "" + + /* + * The characters allowed in hostnames. This is used for validating hostnames given + * to services, such as BotServ bot hostnames and user vhosts. Changing this is not + * recommended unless you know for sure your IRCd supports whatever characters you are + * wanting to use. Telling services to set a vHost containing characters your IRCd + * disallows could potentially break the IRCd and/or Services. + * + * It is recommended you DON'T change this. + */ + vhost_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-" + + /* + * If set to true, allows vHosts to not contain dots (.). + * Newer IRCds generally do not have a problem with this, but the same warning as + * vhost_chars applies. + * + * It is recommended you DON'T change this. + */ + allow_undotted_vhosts = false + + /* + * The characters that are not allowed to be at the very beginning or very ending + * of a vHost. The same warning as vhost_chars applies. + * + * It is recommended you DON'T change this. + */ + disallow_start_or_end = ".-" +} + +/* + * [REQUIRED] Services Options + * + * This section contains various options which determine how Services will operate. + */ +options +{ + /* + * On Linux/UNIX systems Anope can setuid and setgid to this user and group + * after starting up. This is useful if Anope has to bind to privileged ports + */ + #user = "anope" + #group = "anope" + + /* + * This key is used to initiate the random number generator. This number + * MUST be random as you want your passcodes to be random. Don't give this + * key to anyone! Keep it private! + * + * NOTE: If you don't uncomment this or keep the default values, any talented + * programmer would be able to easily "guess" random strings used to mask + * information. Be safe, and come up with a 7-digit number. + * + * This directive is optional, but highly recommended. + */ + #seed = 9866235 + + /* + * If set, Services will perform more stringent checks on passwords. If this + * isn't set, Services will only disallow a password if it is the same as the + * entity (nickname name) with which it is associated. When set, however, + * Services will also check that the password is at least five + * characters long, and in the future will probably check other things + * as well. + * + * This directive is optional, but recommended. + */ + strictpasswords = yes + + /* + * Sets the number of invalid password tries before Services removes a user + * from the network. If a user enters a number of invalid passwords equal to + * the given amount for any Services function or combination of functions + * during a single IRC session (subject to badpasstimeout, below), Services + * will issues a /KILL for the user. If not given, Services will ignore + * failed password attempts (though they will be logged in any case). + * + * This directive is optional, but recommended. + */ + badpasslimit = 5 + + /* + * Sets the time after which invalid passwords are forgotten about. If a user + * does not enter any incorrect passwords in this amount of time, the incorrect + * password count will reset to zero. If not given, the timeout will be + * disabled, and the incorrect password count will never be reset until the user + * disconnects. + * + * This directive is optional. + */ + badpasstimeout = 1h + + /* + * Sets the delay between automatic database updates. + */ + updatetimeout = 5m + + /* + * Sets the delay between checks for expired nicknames and channels. + */ + expiretimeout = 30m + + /* + * Sets the timeout period for reading from the uplink. + */ + readtimeout = 5s + + /* + * Sets the interval between sending warning messages for program errors via + * WALLOPS/GLOBOPS. + */ + warningtimeout = 4h + + /* + * Sets the (maximum) frequency at which the timeout list is checked. This, + * combined with readtimeout above, determines how accurately timed events, + * such as nick kills, occur; it also determines how much CPU time Services + * will use doing this. Higher values will cause less accurate timing but + * less CPU usage. + * + * Note that this value is not an absolute limit on the period between + * checks of the timeout list; the previous may be as great as readtimeout + * (above) during periods of inactivity. + * + * If this directive is not given, it will default to 0. + */ + timeoutcheck = 3s + + /* + * If set, this will allow users to let Services send PRIVMSGs to them + * instead of NOTICEs. Also see the "msg" option of nickserv:defaults, + * which also toggles the default communication (PRIVMSG or NOTICE) to + * use for unregistered users. + * + * This is a feature that is against the IRC RFC and should be used ONLY + * if absolutely necessary. + * + * This directive is optional, and not recommended. + */ + #useprivmsg = yes + + /* + * If set, will force Services to only respond to PRIVMSGs addresses to + * Nick@ServerName - e.g. NickServ@localhost.net. This should be used in + * conjunction with IRCd aliases. This directive is optional. + * + * This option will have no effect on some IRCds, such as TS6 IRCds. + */ + #usestrictprivmsg = yes + + /* + * If set, Services will only show /stats o to IRC Operators. This directive + * is optional. + */ + #hidestatso = yes + + /* + * A space-separated list of ulined servers on your network, it is assumed that + * the servers in this list are allowed to set channel modes and Services will + * not attempt to reverse their mode changes. + * + * WARNING: Do NOT put your normal IRC user servers in this directive. + * + * This directive is optional. + */ + #ulineservers = "stats.your.network" + + /* + * How long to wait between connection retries with the uplink(s). + */ + retrywait = 60s + + /* + * If set, Services will hide commands that users don't have the privilege to execute + * from HELP output. + */ + hideprivilegedcommands = yes + + /* + * If set, Services will hide commands that users can't execute because they are not + * logged in from HELP output. + */ + hideregisteredcommands = yes + + /* + * The grammar regular expressions should use. Options are "ecmascript", "basic", "extended", "awk", "grep", and "egrep". + * + * This directive is optional. + */ + regexengine = "ecmascript" + + /* + * A list of languages to load on startup that will be available in /nickserv set language. + * Useful if you translate Anope to your language. (Explained further in docs/LANGUAGE). + * Note that english should not be listed here because it is the base language. + * + * Removing .UTF-8 will instead use the default encoding for the language, eg. iso-8859-1 for western European languages. + */ + languages = "ca_ES.UTF-8 de_DE.UTF-8 el_GR.UTF-8 es_ES.UTF-8 fr_FR.UTF-8 hu_HU.UTF-8 it_IT.UTF-8 nl_NL.UTF-8 pl_PL.UTF-8 pt_PT.UTF-8 ru_RU.UTF-8 tr_TR.UTF-8" + + /* + * Default language that non- and newly-registered nicks will receive messages in. + * Set to "en" to enable English. Defaults to the language the system uses. + */ + #defaultlanguage = "es_ES.UTF-8" +} + +/* + * [REQUIRED] Casemapping configuration + * + * Includes the configuration for the casemap services should use. + * Services use this case map to compare, with case insensitivity, + * things such as nick names, channel names, etc. + * + * Two casemaps shipped with Anope are ascii and rfc1459. + * + * This value should be set to what your IRCd uses, which is probably rfc1459, + * however Anope has always used ascii for comparison, so the default is ascii. + * + * Changing this value once set is not recommended. + */ +include +{ + name = "ascii.conf" + #name = "rfc1459.conf" +} + +/* + * [OPTIONAL] BotServ + * + * Includes botserv.example.conf, which is necessary for BotServ functionality. + * + * Remove this block to disable BotServ. + */ +include +{ + type = "file" + name = "botserv.example.conf" +} + +/* + * [RECOMMENDED] ChanServ + * + * Includes chanserv.example.conf, which is necessary for ChanServ functionality. + * + * Remove this block to disable ChanServ. + */ +include +{ + type = "file" + name = "chanserv.example.conf" +} + +/* + * [RECOMMENDED] Global + * + * Includes global.example.conf, which is necessary for Global functionality. + * + * Remove this block to disable Global. + */ +include +{ + type = "file" + name = "global.example.conf" +} + +/* + * [OPTIONAL] HostServ + * + * Includes hostserv.example.conf, which is necessary for HostServ functionality. + * + * Remove this block to disable HostServ. + */ +include +{ + type = "file" + name = "hostserv.example.conf" +} + +/* + * [OPTIONAL] MemoServ + * + * Includes memoserv.example.conf, which is necessary for MemoServ functionality. + * + * Remove this block to disable MemoServ. + */ +include +{ + type = "file" + name = "memoserv.example.conf" +} + +/* + * [OPTIONAL] NickServ + * + * Includes nickserv.example.conf, which is necessary for NickServ functionality. + * + * Remove this block to disable NickServ. + */ +include +{ + type = "file" + name = "nickserv.example.conf" +} + +/* + * [RECOMMENDED] OperServ + * + * Includes operserv.example.conf, which is necessary for OperServ functionality. + * + * Remove this block to disable OperServ. + */ +include +{ + type = "file" + name = "operserv.example.conf" +} + +/* + * [RECOMMENDED] Logging Configuration + * + * This section is used for configuring what is logged and where it is logged to. + * You may have multiple log blocks if you wish. Remember to properly secure any + * channels you choose to have Anope log to! + */ +log +{ + /* + * Target(s) to log to, which may be one of the following: + * - a channel name + * - a filename + * - globops + */ + target = "services.log" + + /* Log to both services.log and the channel #services + * + * Note that some older IRCds, such as Ratbox, require services to be in the + * log channel to be able to message it. To do this, configure service:channels to + * join your logging channel. + */ + #target = "services.log #services" + + /* + * The source(s) to only accept log messages from. Leave commented to allow all sources. + * This can be a users name, a channel name, one of our clients (eg, OperServ), or a server name. + */ + #source = "" + + /* + * The bot used to log generic messages which have no predefined sender if there + * is a channel in the target directive. + */ + bot = "Global" + + /* + * The number of days to keep logfiles, only useful if you are logging to a file. + * Set to 0 to never delete old logfiles. + * + * Note that Anope must run 24 hours a day for this feature to work correctly. + */ + logage = 7 + + /* + * What types of log messages should be logged by this block. There are nine general categories: + * + * admin - Execution of admin commands (OperServ, etc). + * override - A services operator using their powers to execute a command they couldn't normally. + * commands - Execution of general commands. + * servers - Server actions, linking, squitting, etc. + * channels - Actions in channels such as joins, parts, kicks, etc. + * users - User actions such as connecting, disconnecting, changing name, etc. + * other - All other messages without a category. + * rawio - Logs raw input and output from services + * debug - Debug messages (log files can become VERY large from this). + * + * These options determine what messages from the categories should be logged. Wildcards are accepted, and + * you can also negate values with a ~. For example, "~operserv/akill operserv/*" would log all operserv + * messages except for operserv/akill. Note that processing stops at the first matching option, which + * means "* ~operserv/*" would log everything because * matches everything. + * + * Valid admin, override, and command options are: + * pesudo-serv/commandname (eg, operserv/akill, chanserv/set) + * + * Valid server options are: + * connect, quit, sync, squit + * + * Valid channel options are: + * create, destroy, join, part, kick, leave, mode + * + * Valid user options are: + * connect, disconnect, quit, nick, ident, host, mode, maxusers, oper, away + * + * Rawio and debug are simple yes/no answers, there are no types for them. + * + * Note that modules may add their own values to these options. + */ + admin = "*" + override = "chanserv/* nickserv/* memoserv/set ~botserv/set botserv/*" + commands = "~operserv/* *" + servers = "*" + #channels = "~mode *" + users = "connect disconnect nick" + other = "*" + rawio = no + debug = no +} + +/* + * A log block to globops some useful things. + */ +log +{ + target = "globops" + admin = "global/* operserv/mode operserv/kick operserv/akill operserv/s*line operserv/noop operserv/jupe operserv/oline operserv/set operserv/svsnick operserv/svsjoin operserv/svspart nickserv/getpass */drop" + servers = "squit" + users = "oper" + other = "expire/* bados akill/*" +} + +/* + * [RECOMMENDED] Oper Access Config + * + * This section is used to set up staff access to restricted oper only commands. + * You may define groups of commands and privileges, as well as who may use them. + * + * This block is recommended, as without it you will be unable to access most oper commands. + * It replaces the old ServicesRoot directive amongst others. + * + * The command names below are defaults and are configured in the *serv.conf's. If you configure + * additional commands with permissions, such as commands from third party modules, the permissions + * must be included in the opertype block before the command can be used. + * + * Available privileges: + * botserv/administration - Can view and assign private BotServ bots + * botserv/fantasy - Can use fantasy commands without the FANTASIA privilege + * chanserv/administration - Can modify the settings of any channel (including changing of the owner!) + * chanserv/access/list - Can view channel access and akick lists, but not modify them + * chanserv/access/modify - Can modify channel access and akick lists, and use /chanserv enforce + * chanserv/auspex - Can see any information with /chanserv info + * chanserv/no-register-limit - May register an unlimited number of channels and nicknames + * chanserv/kick - Can kick and ban users from channels through ChanServ + * memoserv/info - Can see any information with /memoserv info + * memoserv/set-limit - Can set the limit of max stored memos on any user and channel + * memoserv/no-limit - Can send memos through limits and throttles + * nickserv/access - Can modify other users access and certificate lists + * nickserv/alist - Can see the channel access list of other users + * nickserv/auspex - Can see any information with /nickserv info + * nickserv/confirm - Can confirm other users nicknames + * nickserv/drop - Can drop other users nicks + * operserv/config - Can modify services's configuration + * operserv/oper/modify - Can add and remove operators with at most the same privileges + * protected - Can not be kicked from channels by Services + * + * Available commands: + * botserv/bot/del botserv/bot/add botserv/bot/change botserv/set/private + * botserv/set/nobot + * + * chanserv/drop chanserv/getkey chanserv/invite + * chanserv/list chanserv/suspend chanserv/topic + * + * chanserv/saset/bantype chanserv/saset/description chanserv/saset/email chanserv/saset/keepmodes + * chanserv/saset/founder chanserv/saset/keeptopic chanserv/saset/restricted + * chanserv/saset/peace chanserv/saset/persist chanserv/saset/private + * chanserv/saset/secure chanserv/saset/securefounder chanserv/saset/secureops + * chanserv/saset/signkick chanserv/saset/successor chanserv/saset/topiclock + * chanserv/saset/url chanserv/saset/noexpire chanserv/saset/autoop + * + * memoserv/sendall memoserv/staff + * + * nickserv/getpass nickserv/getemail nickserv/suspend nickserv/ajoin + * nickserv/list + * + * nickserv/saset/autoop nickserv/saset/email nickserv/saset/greet nickserv/saset/password + * nickserv/saset/display nickserv/saset/kill nickserv/saset/language nickserv/saset/message + * nickserv/saset/private nickserv/saset/secure nickserv/saset/url nickserv/saset/noexpire + * nickserv/saset/keepmodes + * + * hostserv/set hostserv/del hostserv/list + * + * global/global + * + * operserv/news operserv/stats operserv/kick operserv/exception operserv/seen + * operserv/mode operserv/session operserv/modinfo operserv/ignore operserv/chanlist + * operserv/chankill operserv/akill operserv/sqline operserv/snline operserv/userlist + * operserv/oper operserv/config operserv/umode operserv/logsearch + * operserv/modload operserv/jupe operserv/set operserv/noop + * operserv/quit operserv/update operserv/reload operserv/restart + * operserv/shutdown operserv/svs operserv/oline operserv/kill + * + * Firstly, we define 'opertypes' which are named whatever we want ('Network Administrator', etc). + * These can contain commands for oper-only strings (see above) which grants access to that specific command, + * and privileges (which grant access to more general permissions for the named area). + * Wildcard entries are permitted for both, e.g. 'commands = "operserv/*"' for all OperServ commands. + * + * Below are some default example types, but this is by no means exhaustive, + * and it is recommended that you configure them to your needs. + */ + +opertype +{ + /* The name of this opertype */ + name = "Helper" + + /* What commands (see above) this opertype has */ + commands = "hostserv/*" +} + +opertype +{ + /* The name of this opertype */ + name = "Services Operator" + + /* What opertype(s) this inherits from. Separate with a comma. */ + inherits = "Helper, Another Helper" + + /* What commands (see above) this opertype may use */ + commands = "chanserv/list chanserv/suspend chanserv/topic memoserv/staff nickserv/list nickserv/suspend operserv/mode operserv/chankill operserv/akill operserv/session operserv/modinfo operserv/sqline operserv/oper operserv/kick operserv/ignore operserv/snline" + + /* What privs (see above) this opertype has */ + privs = "chanserv/auspex chanserv/no-register-limit memoserv/* nickserv/auspex nickserv/confirm" + + /* + * Modes to be set on users when they identify to accounts linked to this opertype. + * + * This can be used to automatically oper users who identify for services operator accounts, and is + * useful for setting modes such as Plexus's user mode +N. + * + * Note that some IRCds, such as InspIRCd, do not allow directly setting +o, and this will not work. + */ + #modes = "+o" +} + +opertype +{ + name = "Services Administrator" + + inherits = "Services Operator" + + commands = "botserv/* chanserv/access/list chanserv/drop chanserv/getkey chanserv/saset/noexpire memoserv/sendall nickserv/saset/* nickserv/getemail operserv/news operserv/jupe operserv/svs operserv/stats operserv/oline operserv/noop operserv/forbid global/*" + + privs = "*" +} + +opertype +{ + name = "Services Root" + + commands = "*" + + privs = "*" +} + +/* + * After defining different types of operators in the above opertype section, we now define who is in these groups + * through 'oper' blocks, similar to ircd access. + * + * The default is to comment these out (so NOBODY will have Services access). + * You probably want to add yourself and a few other people at minimum. + * + * As with all permissions, make sure to only give trustworthy people access to Services. + */ + +#oper +{ + /* The nickname of this services oper */ + #name = "nick1" + + /* The opertype this person will have */ + type = "Services Root" + + /* If set, the user must be an oper on the IRCd to gain their Services + * oper privileges. + */ + require_oper = yes + + /* An optional password. If defined the user must login using "/msg OperServ LOGIN" first */ + #password = "secret" + + /* An optional SSL fingerprint. If defined, it's required to be able to use this opertype. */ + #certfp = "ed3383b3f7d74e89433ddaa4a6e5b2d7" + + /* An optional list of user@host masks. If defined the user must be connected from one of them */ + #host = "*@*.anope.org ident@*" + + /* An optional vHost to set on users who identify for this oper block. + * This will override HostServ vHosts, and may not be available on all IRCds + */ + #vhost = "oper.mynet" +} + +#oper +{ + name = "nick2" + type = "Services Administrator" +} + +#oper +{ + name = "nick3" + type = "Helper" +} + +/* + * [OPTIONAL] Mail Config + * + * This section contains settings related to the use of e-mail from Services. + * If the usemail directive is set to yes, unless specified otherwise, all other + * directives are required. + * + * NOTE: Users can find the IP of the machine services is running on by examining + * mail headers. If you do not want your IP known, you should set up a mail relay + * to strip the relevant headers. + */ +mail +{ + /* + * If set, this option enables the mail commands in Services. You may choose + * to disable it if you have no Sendmail-compatible mailer installed. Whilst + * this directive (and entire block) is optional, it is required if + * nickserv:registration is set to yes. + */ + usemail = yes + + /* + * This is the command-line that will be used to call the mailer to send an + * e-mail. It must be called with all the parameters needed to make it + * scan the mail input to find the mail recipient; consult your mailer + * documentation. + * + * Postfix users must use the compatible sendmail utility provided with + * it. This one usually needs no parameters on the command-line. Most + * sendmail applications (or replacements of it) require the -t option + * to be used. + */ + sendmailpath = "/usr/sbin/sendmail -t" + + /* + * This is the e-mail address from which all the e-mails are to be sent from. + * It should really exist. + */ + sendfrom = "services@localhost.net" + + /* + * This controls the minimum amount of time a user must wait before sending + * another e-mail after they have sent one. It also controls the minimum time + * a user must wait before they can receive another e-mail. + * + * This feature prevents users from being mail bombed using Services and + * it is highly recommended that it be used. + * + * This directive is optional, but highly recommended. + */ + delay = 5m + + /* + * If set, Services will not attempt to put quotes around the TO: fields + * in e-mails. + * + * This directive is optional, and as far as we know, it's only needed + * if you are using ESMTP or QMail to send out e-mails. + */ + #dontquoteaddresses = yes + + /* + * The subject and message of emails sent to users when they register accounts. + */ + registration_subject = "Nickname registration for %n" + registration_message = "Hi, + + You have requested to register the nickname %n on %N. + Please type \" /msg NickServ CONFIRM %c \" to complete registration. + + If you don't know why this mail was sent to you, please ignore it silently. + + %N administrators." + + /* + * The subject and message of emails sent to users when they request a new password. + */ + reset_subject = "Reset password request for %n" + reset_message = "Hi, + + You have requested to have the password for %n reset. + To reset your password, type \" /msg NickServ CONFIRM %n %c \" + + If you don't know why this mail was sent to you, please ignore it silently. + + %N administrators." + + /* + * The subject and message of emails sent to users when they request a new email address. + */ + emailchange_subject = "Email confirmation" + emailchange_message = "Hi, + + You have requested to change your email address from %e to %E. + Please type \" /msg NickServ CONFIRM %c \" to confirm this change. + + If you don't know why this mail was sent to you, please ignore it silently. + + %N administrators." + + /* + * The subject and message of emails sent to users when they receive a new memo. + */ + memo_subject = "New memo" + memo_message = "Hi %n, + + You've just received a new memo from %s. This is memo number %d. + + Memo text: + + %t" +} + +/* + * [REQUIRED] Database configuration. + * + * This section is used to configure databases used by Anope. + * You should at least load one database method, otherwise any data you + * have will not be stored! + */ + +/* + * [DEPRECATED] db_old + * + * This is the old binary database format from late Anope 1.7.x, Anope 1.8.x, and + * early Anope 1.9.x. This module only loads these databases, and will NOT save them. + * You should only use this to upgrade old databases to a newer database format by loading + * other database modules in addition to this one, which will be used when saving databases. + */ +#module +{ + name = "database/old" + + /* + * This is the encryption type used by the databases. This must be set correctly or + * your passwords will not work. Valid options are: md5, oldmd5, sha1, and plain. + * You must also be sure to load the correct encryption module below in the Encryption + * Modules section so that your passwords work. + */ + #hash = "md5" +} + +/* + * [RECOMMENDED] db_flatfile + * + * This is the default flatfile database format. + */ +module +{ + name = "database/flatfile" + + /* + * The database name db_flatfile should use + */ + database = "anope.db" + + /* + * Sets the number of days backups of databases are kept. If you don't give it, + * or if you set it to 0, Services won't backup the databases. + * + * NOTE: Services must run 24 hours a day for this feature to work. + * + * This directive is optional, but recommended. + */ + keepbackups = 3 + + /* + * Allows Services to continue file write operations (i.e. database saving) + * even if the original file cannot be backed up. Enabling this option may + * allow Services to continue operation under conditions where it might + * otherwise fail, such as a nearly-full disk. + * + * NOTE: Enabling this option can cause irrecoverable data loss under some + * conditions, so make CERTAIN you know what you're doing when you enable it! + * + * This directive is optional, and you are discouraged against enabling it. + */ + #nobackupokay = yes +} + +/* + * db_sql + * + * db_sql allows saving and loading databases using one of the SQL engines. + * This module reads and writes to SQL in real time. Changes to the SQL tables + * will be immediately reflected into Anope. + * + */ +#module +{ + name = "database/sql" + + /* + * The SQL service database/sql should use, these are configured in modules.conf. + * For MySQL, this should probably be mysql/main. + */ + engine = "sqlite/main" + + /* + * An optional prefix to prepended to the name of each created table. + */ + #prefix = "anope_db_" +} + +/* + * db_redis. + * + * This module allows using Redis (http://redis.io) as a database backend. + * This module requires the module redis to be loaded and configured properly. + */ +#module +{ + name = "database/redis" + + /* + * Redis database to use. This must be configured with the module redis. + */ + engine = "redis/main" +} + +/* + * [RECOMMENDED] Encryption modules. + * + * The encryption modules are used when dealing with passwords. This determines how + * the passwords are stored in the databases, and does not add any security as + * far as transmitting passwords over the network goes. + * + * Without any encryption modules loaded users will not be able to authenticate unless + * there is another module loaded that provides authentication checking, such as + * ldap_authentication or sql_authentication. + * + * With encryption/none, passwords will be stored in plain text, allowing for passwords + * to be recovered later but it isn't secure and therefore is not recommended. + * + * The other encryption modules use one-way encryption, so the passwords can not + * be recovered later if those are used. + * + * The first encryption module loaded is the primary encryption module. All new passwords are + * encrypted by this module. Old passwords stored in another encryption method are + * automatically re-encrypted by the primary encryption module on next identify. + * + */ + +#module { name = "encryption/bcrypt" } +module { name = "encryption/sha256" } + +/* + * [DEPRECATED] Deprecated encryption modules. + */ +#module { name = "encryption/md5" } +#module { name = "encryption/sha1" } +#module { name = "encryption/old" } +#module { name = "encryption/none" } + + +/* Extra (optional) modules. */ +include +{ + type = "file" + name = "modules.example.conf" +} + +/* + * Chanstats module. + * Requires a MySQL Database. + */ +#include +{ + type = "file" + name = "chanstats.example.conf" +} + +/* + * IRC2SQL Gateway + * This module collects data about users, channels and servers. It doesn't build stats + * itself, however, it gives you the database, it's up to you how you use it. + * + * Requires a MySQL Database and MySQL version 5.5 or higher + */ +#include +{ + type = "file" + name = "irc2sql.example.conf" +} diff --git a/data/example.conf b/data/example.conf deleted file mode 100644 index a09ce2378..000000000 --- a/data/example.conf +++ /dev/null @@ -1,1201 +0,0 @@ -/* - * Example configuration file for Services. After making the appropriate - * changes to this file, place it in the Services conf directory (as - * specified in the "configure" script, default /home/username/anope/conf) - * under the name "anope.conf". - * - * The format of this file is fairly simple: three types of comments are supported: - * - All text after a '#' on a line is ignored, as in shell scripting - * - All text after '//' on a line is ignored, as in C++ - * - A block of text like this one is ignored, as in C - * - * Outside of comments, there are three structures: blocks, keys, and values. - * - * A block is a named container, which contains a number of key to value pairs - * - you may think of this as an array. - * - * A block is created like so: - * foobar - * { - * moo = "cow" - * foo = bar - * } - * - * Note that nameless blocks are allowed and are often used with comments to allow - * easily commenting an entire block, for example: - * #foobar - * { - * moo = "cow" - * foo = bar - * } - * is an entirely commented block. - * - * Keys are case insensitive. Values depend on what key - generally, information is - * given in the key comment. The quoting of values (and most other syntax) is quite - * flexible, however, please do not forget to quote your strings: - * - * "This is a parameter string with spaces in it" - * - * If you need to include a double quote inside a quoted string, precede it - * by a backslash: - * - * "This string has \"double quotes\" in it" - * - * Time parameters can be specified either as an integer representing a - * number of seconds (e.g. "3600" = 1 hour), or as an integer with a unit - * specifier: "s" = seconds, "m" = minutes, "h" = hours, "d" = days. - * Combinations (such as "1h30m") are not permitted. Examples (all of which - * represent the same length of time, one day): - * - * "86400", "86400s", "1440m", "24h", "1d" - * - * In the documentation for each directive, one of the following will be - * included to indicate whether an option is required: - * - * [REQUIRED] - * Indicates a directive which must be given. Without it, Services will - * not start. - * - * [RECOMMENDED] - * Indicates a directive which may be omitted, but omitting it may cause - * undesirable side effects. - * - * [OPTIONAL] - * Indicates a directive which is optional. If not given, the feature - * will typically be disabled. If this is not the case, more - * information will be given in the documentation. - * - * [DISCOURAGED] - * Indicates a directive which may cause undesirable side effects if - * specified. - * - * [DEPRECATED] - * Indicates a directive which will disappear in a future version of - * Services, usually because its functionality has been either - * superseded by that of other directives or incorporated into the main - * program. - */ - -/* - * [OPTIONAL] Defines - * - * You can define values to other values, which can be used to easily change - * many values in the configuration. at once. - */ - -/* - * The services.host define is used in multiple different locations throughout the - * configuration for services clients hostnames. - */ -define -{ - name = "services.host" - value = "services.localhost.net" -} - -/* - * [OPTIONAL] Additional Includes - * - * You can include additional configuration files here. - * You may also include executable files, which will be executed and - * the output from it will be included into your configuration. - */ - -#include -{ - type = "file" - name = "some.conf" -} - -#include -{ - type = "executable" - name = "/usr/bin/wget -q -O - http://some.misconfigured.network.com/anope.conf" -} - -/* - * [REQUIRED] IRCd Config - * - * This section is used to set up Anope to connect to your IRC network. - * This section can be included multiple times, and Anope will attempt to - * connect to each server until it finally connects. - * - * Each uplink IRCd should have a corresponding configuration to allow Services - * to link to it. - * - * An example configuration for InspIRCd that is compatible with the below uplink - * and serverinfo configuration would look like: - * - * - * - * - * - * An example configuration for UnrealIRCd that is compatible with the below uplink - * and serverinfo configuration would look like: - * - * link services.localhost.net - * { - * username *; - * hostname *; - * bind-ip "127.0.0.1"; - * port 7000; - * hub *; - * password-connect "mypassword"; - * password-receive "mypassword"; - * class servers; - * }; - * ulines { services.localhost.net; }; - * listen 127.0.0.1:7000; - */ -uplink -{ - /* - * The IP or hostname of the IRC server you wish to connect Services to. - * Usually, you will want to connect Services over 127.0.0.1 (aka localhost). - * - * NOTE: On some shell providers, this will not be an option. - */ - host = "127.0.0.1" - - /* - * Enable if Services should connect using IPv6. - */ - ipv6 = no - - /* - * Enable if Services should connect using SSL. - * You must have an SSL module loaded for this to work. - */ - ssl = no - - /* - * The port to connect to. - * The IRCd *MUST* be configured to listen on this port, and to accept - * server connections. - * - * Refer to your IRCd documentation for how this is to be done. - */ - port = 7000 - - /* - * The password to send to the IRC server for authentication. - * This must match the link block on your IRCd. - * - * Refer to your IRCd documentation for more information on link blocks. - */ - password = "mypassword" -} - -/* - * [REQUIRED] Server Information - * - * This section contains information about the Services server. - */ -serverinfo -{ - /* - * The hostname that Services will be seen as, it must have no conflicts with any - * other server names on the rest of your IRC network. Note that it does not have - * to be an existing hostname, just one that isn't on your network already. - */ - name = "services.localhost.net" - - /* - * The text which should appear as the server's information in /whois and similar - * queries. - */ - description = "Services for IRC Networks" - - /* - * The local address that Services will bind to before connecting to the remote - * server. This may be useful for multihomed hosts. If omitted, Services will let - * the Operating System choose the local address. This directive is optional. - * - * If you don't know what this means or don't need to use it, just leave this - * directive commented out. - */ - #localhost = "nowhere." - - /* - * What Server ID to use for this connection? - * Note: This should *ONLY* be used for TS6/P10 IRCds. Refer to your IRCd documentation - * to see if this is needed. - */ - #id = "00A" - - /* - * The filename containing the Services process ID. The path is relative to the - * services root directory. - */ - pid = "data/anope.pid" - - /* - * The filename containing the Message of the Day. The path is relative to the - * services root directory. - */ - motd = "conf/motd.txt" -} - -/* - * [REQUIRED] Protocol configuration. - * - * This directive tells Anope which IRCd Protocol to speak when connecting. - * You MUST modify this to match the IRCd you run. You may want to modify - * the protocol configuration file to tune protocol specific features. - * - * Supported: - * - bahamut - * - charybdis - * - hybrid - * - inspircd20 - * - ngircd - * - plexus - * - ratbox - * - unreal - */ -include -{ - name = "inspircd20.example.conf" -} - -/* - * [REQUIRED] Network Information - * - * This section contains information about the IRC network that Services will be - * connecting to. - */ -networkinfo -{ - /* - * This is the name of the network that Services will be running on. - */ - networkname = "LocalNet" - - /* - * Set this to the maximum allowed nick length on your network. - * Be sure to set this correctly, as setting this wrong can result in - * Services being disconnected from the network. - */ - nicklen = 31 - - /* Set this to the maximum allowed ident length on your network. - * Be sure to set this correctly, as setting this wrong can result in - * Services being disconnected from the network. - */ - userlen = 10 - - /* Set this to the maximum allowed hostname length on your network. - * Be sure to set this correctly, as setting this wrong can result in - * Services being disconnected from the network. - */ - hostlen = 64 - - /* Set this to the maximum allowed channel length on your network. - */ - chanlen = 32 - - /* The maximum number of list modes settable on a channel (such as b, e, I). - * Comment out or set to 0 to disable. - */ - modelistsize = 100 - - /* - * Characters allowed in nicknames. This always includes the characters described - * in RFC1459, and so does not need to be set for normal behavior. Changing this to - * include characters your IRCd doesn't support will cause your IRCd and/or Services - * to break. Multibyte characters are not supported, nor are escape sequences. - * - * It is recommended you DON'T change this. - */ - #nick_chars = "" - - /* - * The characters allowed in hostnames. This is used for validating hostnames given - * to services, such as BotServ bot hostnames and user vhosts. Changing this is not - * recommended unless you know for sure your IRCd supports whatever characters you are - * wanting to use. Telling services to set a vHost containing characters your IRCd - * disallows could potentially break the IRCd and/or Services. - * - * It is recommended you DON'T change this. - */ - vhost_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-" - - /* - * If set to true, allows vHosts to not contain dots (.). - * Newer IRCds generally do not have a problem with this, but the same warning as - * vhost_chars applies. - * - * It is recommended you DON'T change this. - */ - allow_undotted_vhosts = false - - /* - * The characters that are not allowed to be at the very beginning or very ending - * of a vHost. The same warning as vhost_chars applies. - * - * It is recommended you DON'T change this. - */ - disallow_start_or_end = ".-" -} - -/* - * [REQUIRED] Services Options - * - * This section contains various options which determine how Services will operate. - */ -options -{ - /* - * On Linux/UNIX systems Anope can setuid and setgid to this user and group - * after starting up. This is useful if Anope has to bind to privileged ports - */ - #user = "anope" - #group = "anope" - - /* - * This key is used to initiate the random number generator. This number - * MUST be random as you want your passcodes to be random. Don't give this - * key to anyone! Keep it private! - * - * NOTE: If you don't uncomment this or keep the default values, any talented - * programmer would be able to easily "guess" random strings used to mask - * information. Be safe, and come up with a 7-digit number. - * - * This directive is optional, but highly recommended. - */ - #seed = 9866235 - - /* - * If set, Services will perform more stringent checks on passwords. If this - * isn't set, Services will only disallow a password if it is the same as the - * entity (nickname name) with which it is associated. When set, however, - * Services will also check that the password is at least five - * characters long, and in the future will probably check other things - * as well. - * - * This directive is optional, but recommended. - */ - strictpasswords = yes - - /* - * Sets the number of invalid password tries before Services removes a user - * from the network. If a user enters a number of invalid passwords equal to - * the given amount for any Services function or combination of functions - * during a single IRC session (subject to badpasstimeout, below), Services - * will issues a /KILL for the user. If not given, Services will ignore - * failed password attempts (though they will be logged in any case). - * - * This directive is optional, but recommended. - */ - badpasslimit = 5 - - /* - * Sets the time after which invalid passwords are forgotten about. If a user - * does not enter any incorrect passwords in this amount of time, the incorrect - * password count will reset to zero. If not given, the timeout will be - * disabled, and the incorrect password count will never be reset until the user - * disconnects. - * - * This directive is optional. - */ - badpasstimeout = 1h - - /* - * Sets the delay between automatic database updates. - */ - updatetimeout = 5m - - /* - * Sets the delay between checks for expired nicknames and channels. - */ - expiretimeout = 30m - - /* - * Sets the timeout period for reading from the uplink. - */ - readtimeout = 5s - - /* - * Sets the interval between sending warning messages for program errors via - * WALLOPS/GLOBOPS. - */ - warningtimeout = 4h - - /* - * Sets the (maximum) frequency at which the timeout list is checked. This, - * combined with readtimeout above, determines how accurately timed events, - * such as nick kills, occur; it also determines how much CPU time Services - * will use doing this. Higher values will cause less accurate timing but - * less CPU usage. - * - * Note that this value is not an absolute limit on the period between - * checks of the timeout list; the previous may be as great as readtimeout - * (above) during periods of inactivity. - * - * If this directive is not given, it will default to 0. - */ - timeoutcheck = 3s - - /* - * If set, this will allow users to let Services send PRIVMSGs to them - * instead of NOTICEs. Also see the "msg" option of nickserv:defaults, - * which also toggles the default communication (PRIVMSG or NOTICE) to - * use for unregistered users. - * - * This is a feature that is against the IRC RFC and should be used ONLY - * if absolutely necessary. - * - * This directive is optional, and not recommended. - */ - #useprivmsg = yes - - /* - * If set, will force Services to only respond to PRIVMSGs addresses to - * Nick@ServerName - e.g. NickServ@localhost.net. This should be used in - * conjunction with IRCd aliases. This directive is optional. - * - * This option will have no effect on some IRCds, such as TS6 IRCds. - */ - #usestrictprivmsg = yes - - /* - * If set, Services will only show /stats o to IRC Operators. This directive - * is optional. - */ - #hidestatso = yes - - /* - * A space-separated list of ulined servers on your network, it is assumed that - * the servers in this list are allowed to set channel modes and Services will - * not attempt to reverse their mode changes. - * - * WARNING: Do NOT put your normal IRC user servers in this directive. - * - * This directive is optional. - */ - #ulineservers = "stats.your.network" - - /* - * How long to wait between connection retries with the uplink(s). - */ - retrywait = 60s - - /* - * If set, Services will hide commands that users don't have the privilege to execute - * from HELP output. - */ - hideprivilegedcommands = yes - - /* - * If set, Services will hide commands that users can't execute because they are not - * logged in from HELP output. - */ - hideregisteredcommands = yes - - /* - * The grammar regular expressions should use. Options are "ecmascript", "basic", "extended", "awk", "grep", and "egrep". - * - * This directive is optional. - */ - regexengine = "ecmascript" - - /* - * A list of languages to load on startup that will be available in /nickserv set language. - * Useful if you translate Anope to your language. (Explained further in docs/LANGUAGE). - * Note that english should not be listed here because it is the base language. - * - * Removing .UTF-8 will instead use the default encoding for the language, eg. iso-8859-1 for western European languages. - */ - languages = "ca_ES.UTF-8 de_DE.UTF-8 el_GR.UTF-8 es_ES.UTF-8 fr_FR.UTF-8 hu_HU.UTF-8 it_IT.UTF-8 nl_NL.UTF-8 pl_PL.UTF-8 pt_PT.UTF-8 ru_RU.UTF-8 tr_TR.UTF-8" - - /* - * Default language that non- and newly-registered nicks will receive messages in. - * Set to "en" to enable English. Defaults to the language the system uses. - */ - #defaultlanguage = "es_ES.UTF-8" -} - -/* - * [REQUIRED] Casemapping configuration - * - * Includes the configuration for the casemap services should use. - * Services use this case map to compare, with case insensitivity, - * things such as nick names, channel names, etc. - * - * Two casemaps shipped with Anope are ascii and rfc1459. - * - * This value should be set to what your IRCd uses, which is probably rfc1459, - * however Anope has always used ascii for comparison, so the default is ascii. - * - * Changing this value once set is not recommended. - */ -include -{ - name = "ascii.conf" - #name = "rfc1459.conf" -} - -/* - * [OPTIONAL] BotServ - * - * Includes botserv.example.conf, which is necessary for BotServ functionality. - * - * Remove this block to disable BotServ. - */ -include -{ - type = "file" - name = "botserv.example.conf" -} - -/* - * [RECOMMENDED] ChanServ - * - * Includes chanserv.example.conf, which is necessary for ChanServ functionality. - * - * Remove this block to disable ChanServ. - */ -include -{ - type = "file" - name = "chanserv.example.conf" -} - -/* - * [RECOMMENDED] Global - * - * Includes global.example.conf, which is necessary for Global functionality. - * - * Remove this block to disable Global. - */ -include -{ - type = "file" - name = "global.example.conf" -} - -/* - * [OPTIONAL] HostServ - * - * Includes hostserv.example.conf, which is necessary for HostServ functionality. - * - * Remove this block to disable HostServ. - */ -include -{ - type = "file" - name = "hostserv.example.conf" -} - -/* - * [OPTIONAL] MemoServ - * - * Includes memoserv.example.conf, which is necessary for MemoServ functionality. - * - * Remove this block to disable MemoServ. - */ -include -{ - type = "file" - name = "memoserv.example.conf" -} - -/* - * [OPTIONAL] NickServ - * - * Includes nickserv.example.conf, which is necessary for NickServ functionality. - * - * Remove this block to disable NickServ. - */ -include -{ - type = "file" - name = "nickserv.example.conf" -} - -/* - * [RECOMMENDED] OperServ - * - * Includes operserv.example.conf, which is necessary for OperServ functionality. - * - * Remove this block to disable OperServ. - */ -include -{ - type = "file" - name = "operserv.example.conf" -} - -/* - * [RECOMMENDED] Logging Configuration - * - * This section is used for configuring what is logged and where it is logged to. - * You may have multiple log blocks if you wish. Remember to properly secure any - * channels you choose to have Anope log to! - */ -log -{ - /* - * Target(s) to log to, which may be one of the following: - * - a channel name - * - a filename - * - globops - */ - target = "services.log" - - /* Log to both services.log and the channel #services - * - * Note that some older IRCds, such as Ratbox, require services to be in the - * log channel to be able to message it. To do this, configure service:channels to - * join your logging channel. - */ - #target = "services.log #services" - - /* - * The source(s) to only accept log messages from. Leave commented to allow all sources. - * This can be a users name, a channel name, one of our clients (eg, OperServ), or a server name. - */ - #source = "" - - /* - * The bot used to log generic messages which have no predefined sender if there - * is a channel in the target directive. - */ - bot = "Global" - - /* - * The number of days to keep logfiles, only useful if you are logging to a file. - * Set to 0 to never delete old logfiles. - * - * Note that Anope must run 24 hours a day for this feature to work correctly. - */ - logage = 7 - - /* - * What types of log messages should be logged by this block. There are nine general categories: - * - * admin - Execution of admin commands (OperServ, etc). - * override - A services operator using their powers to execute a command they couldn't normally. - * commands - Execution of general commands. - * servers - Server actions, linking, squitting, etc. - * channels - Actions in channels such as joins, parts, kicks, etc. - * users - User actions such as connecting, disconnecting, changing name, etc. - * other - All other messages without a category. - * rawio - Logs raw input and output from services - * debug - Debug messages (log files can become VERY large from this). - * - * These options determine what messages from the categories should be logged. Wildcards are accepted, and - * you can also negate values with a ~. For example, "~operserv/akill operserv/*" would log all operserv - * messages except for operserv/akill. Note that processing stops at the first matching option, which - * means "* ~operserv/*" would log everything because * matches everything. - * - * Valid admin, override, and command options are: - * pesudo-serv/commandname (eg, operserv/akill, chanserv/set) - * - * Valid server options are: - * connect, quit, sync, squit - * - * Valid channel options are: - * create, destroy, join, part, kick, leave, mode - * - * Valid user options are: - * connect, disconnect, quit, nick, ident, host, mode, maxusers, oper, away - * - * Rawio and debug are simple yes/no answers, there are no types for them. - * - * Note that modules may add their own values to these options. - */ - admin = "*" - override = "chanserv/* nickserv/* memoserv/set ~botserv/set botserv/*" - commands = "~operserv/* *" - servers = "*" - #channels = "~mode *" - users = "connect disconnect nick" - other = "*" - rawio = no - debug = no -} - -/* - * A log block to globops some useful things. - */ -log -{ - target = "globops" - admin = "global/* operserv/mode operserv/kick operserv/akill operserv/s*line operserv/noop operserv/jupe operserv/oline operserv/set operserv/svsnick operserv/svsjoin operserv/svspart nickserv/getpass */drop" - servers = "squit" - users = "oper" - other = "expire/* bados akill/*" -} - -/* - * [RECOMMENDED] Oper Access Config - * - * This section is used to set up staff access to restricted oper only commands. - * You may define groups of commands and privileges, as well as who may use them. - * - * This block is recommended, as without it you will be unable to access most oper commands. - * It replaces the old ServicesRoot directive amongst others. - * - * The command names below are defaults and are configured in the *serv.conf's. If you configure - * additional commands with permissions, such as commands from third party modules, the permissions - * must be included in the opertype block before the command can be used. - * - * Available privileges: - * botserv/administration - Can view and assign private BotServ bots - * botserv/fantasy - Can use fantasy commands without the FANTASIA privilege - * chanserv/administration - Can modify the settings of any channel (including changing of the owner!) - * chanserv/access/list - Can view channel access and akick lists, but not modify them - * chanserv/access/modify - Can modify channel access and akick lists, and use /chanserv enforce - * chanserv/auspex - Can see any information with /chanserv info - * chanserv/no-register-limit - May register an unlimited number of channels and nicknames - * chanserv/kick - Can kick and ban users from channels through ChanServ - * memoserv/info - Can see any information with /memoserv info - * memoserv/set-limit - Can set the limit of max stored memos on any user and channel - * memoserv/no-limit - Can send memos through limits and throttles - * nickserv/access - Can modify other users access and certificate lists - * nickserv/alist - Can see the channel access list of other users - * nickserv/auspex - Can see any information with /nickserv info - * nickserv/confirm - Can confirm other users nicknames - * nickserv/drop - Can drop other users nicks - * operserv/config - Can modify services's configuration - * operserv/oper/modify - Can add and remove operators with at most the same privileges - * protected - Can not be kicked from channels by Services - * - * Available commands: - * botserv/bot/del botserv/bot/add botserv/bot/change botserv/set/private - * botserv/set/nobot - * - * chanserv/drop chanserv/getkey chanserv/invite - * chanserv/list chanserv/suspend chanserv/topic - * - * chanserv/saset/bantype chanserv/saset/description chanserv/saset/email chanserv/saset/keepmodes - * chanserv/saset/founder chanserv/saset/keeptopic chanserv/