Anope for Windows ----------------- 1) Building the Source 2) Installation 3) Compiling Modules 4) Other compile options 5) Credits 1) Building the Source NOTE: If you have downloaded one of the pre-compiled installers, you do NOT need to complete this step, and you can proceed to step 2. If you want to build Anope from source on a Win32 system, you will need to follow this instructions: 1) Download the required files: * Current Anope source: http://sourceforge.net/project/showfiles.php?group_id=94081 If you have Visual C++ 2008, 2010, or 2012 skip ahead to step 2, else you need to download the following free components from Microsoft. Once downloaded, install one of the following, for best results use MS VC 2010. * Microsoft Visual C++ 2010 Express http://www.microsoft.com/visualstudio/eng/products/visual-studio-2010-express or * Microsoft Visual C++ 2008 Express Edition: http://www.microsoft.com/en-us/download/details.aspx?id=14597 * Microsoft Windows Platform SDK: (Requires WGA validation) http://www.microsoft.com/en-us/download/details.aspx?id=3138 * MySQL for Windows (only needed if building with MySQL enabled): http://dev.mysql.com/ (NOTE: Anope can be compiled against MySQL Version 3.23 and above) 2) Unpack the Anope tarball with your favorite uncompression program (WinZip or WinRAR, etc). 3) Bring up the Visual C++ Command Prompt; This will launch a DOS Command Prompt like window, which will set the environment properties needed to make Anope. Change directories to where you unpacked the source code in step 2, by typing: cd e.g. cd c:\anope-stable 4) You now need to configure Anope to your requirements. At the prompt type: Config.bat NOTE: If you run an Anti-Virus program such as McAfee or Norton, you may be unable to run this command due to the protection in place. Some Anti- Virus programs may detect the Anope Configuration Tool as a worm, however this is not the case. If you are prompted to allow or deny execution of the script, you should choose allow. If the script fails to run, and no notice is displayed, please check your Anti-Virus settings before seeking assistance. An interactive configuration program should guide you through the install options, and then detect your Microsoft Visual C++ Library files. If it fails to detect them, you should check you have everything installed. If you cannot find whats causing the error, please visit our forums or our IRC Support channel for assistance. 5) You are now ready to compile. At the prompt type: nmake -f Makefile.win32 Once you are back at the command prompt again, if there have been no errors, you are ready to go. Should you encounter errors with the installation process, check the messages displayed for advice on resolving them. If you are unable to resolve the issues yourself, seek assistance on our forums or in our IRC Support channel. 6) Anope will install the files where they belong. The only thing you need to do is rename "data/example.conf" to be "data/services.conf". You have now completed the building phase of Anope for Windows. You can now move on to the next section, which is related to setting up Anope. 2) Installation Since Anope for Windows does not use a visual interface, you must do the configuration with a text editor before proceeding with running Anope itself. NOTE: You may need to open the configuration file with Wordpad, or a text editor which supports UNIX line endings. Opening the configuration file in Notepad will cause strange characters to appear, and you may not be able to edit the file correctly. Open services.conf, and read through it carefully and adjust the settings you think you need to adjust. Pay special attention to these settings: A) IRCDModule: This is the name of an IRCd Module that Anope will use to communicate with your server. Anope supports 15 IRCds, so ensure you set the right value here. B) RemoteServer: This is the address to your ircd, along with the port and password. You should consult your ircd documentation on how to link ircds. C) ServicesRoot: Remove the # and change the names to your nick so you can take control of services once they are online. D) UserKey1/2/3: Remove the # infront of the three UserKey settings, and change the parameters to numbers; around 6-7 digits will do. If you are unsure of the settings, you can go to the dos command prompt and run "anope.exe -nofork -debug" and watch the information as it attempts to connect. You can launch services in two ways. If you are sure that the entered configuration information is correct, simply double clicking the Anope executable will cause it to start; no window will pop up. If you'd rather have a more textual output, you can start at the dos prompt and type in "anope.exe". If services are successfully started up the dos prompt will seem to hang; at this point you can safely close the dos window. 3) Compiling Modules If you want to build other modules than the ones shipped by default, you will need to modify the Makefile.inc.win32 file, in the src\modules folder. A) Add modules; find the line stating "SRCS=" and add the name of the file to the end of the line. So if you have two files: SRCS=file.c file2.c If you are compiling a folder of module components, such as the example "catserv", you will need to add/change the "SUBS=" line. If you were compiling the "catserv" example, the line would look like this: SUBS=catserv B) When you've done this, use the same command prompt you set up in part 1, change directories to the src\modules folder, and type: nmake -f Makefile.win32 followed afterwards, by: nmake -f Makefile.win32 install C) You should now be able to load your modules on IRC via OperServ, or via the services.conf file. 4) Other compile options A) If you have trouble recompiling Anope, you should try: nmake -f Makefile.win32 distclean This will clean up the source directory and allow for chages to be applied to previously compiled files. B) A list of valid options are: install distclean clean spotless all core protocols mypasql languages modules The syntax for these options is: nmake -f Makefile.win32 [option] 5) Credits Anope is based on Epona and IRCServices. See CREDITS for more credits and a complete list of all developers. Anope's Windows-specific code is provided by: * Dominick Meglio * Trystan Scott Lee * Chris Hogben Anope's Windows Installer was made using: * NSIS 2.20