BUILD : 1.7.5 (315) BUGS : NOTES : Updated documentation to suit the new build process

git-svn-id: svn://svn.anope.org/anope/trunk@315 31f1291d-b8d6-0310-a050-a5561fc1590b


git-svn-id: http://anope.svn.sourceforge.net/svnroot/anope/trunk@193 5417fbe8-f217-4b02-8779-1006273d7864

6 files changed, 32 insertions, 22 deletions

diff --git a/Changes b/Changes
index 40001c138..38ccd06ce 100644
--- a/Changes
+++ b/Changes
@@ -4,6 +4,7 @@ Provided by Anope Dev. <dev@anope.org> - 2004
 07/17 A Switched to autoconf for configure script.                        [ #00]
 07/05 A Warning when LocalAddress conflicts with RemoteServer.            [#118]
 06/18 A Added proper Bahamut1.8 support.                                  [ #55]
+08/10 F Updated documentation to reflect the changed build process.       [ #00]
 07/23 F Fixed BotServ buffer                                              [#131]		
 07/22 F Free NSNickTracking when a user quits.                            [#126]
 07/22 F NOOP bug with wildcards.                                          [#115]
diff --git a/docs/INSTALL b/docs/INSTALL
index da67aa8cb..2c1cd3883 100644
--- a/docs/INSTALL
+++ b/docs/INSTALL
@@ -26,7 +26,7 @@ The very first thing you need to do is to get the Anope package
 Next, unpack the package in your home directory, and go into the
 created directory.
   
-Now type ./configure to start the configuration script. It will
+Now type ./Config to start the configuration script. It will
 ask you a few questions, and figure out how to compile Anope on
 your system. If you are unsure about the answer to a question,
 use the default value. 
@@ -133,6 +133,11 @@ link Services.LocalHost.Net
         class           servers;
 };
 
+If you're unable to get a link with your IRCd after reading this section,
+you might try the interactive link maker, which is located at:
+
+    http://heinz.anope.org/ilm.php
+
 
 4. Starting Anope
 -----------------
diff --git a/docs/MODULES b/docs/MODULES
index 114d0330c..af2cd376d 100644
--- a/docs/MODULES
+++ b/docs/MODULES
@@ -10,17 +10,17 @@ Introduction:
 
 Installation:
 
-    1. You need to configure Anope to be compiled with module support. To 
-       do so you must run ./configure and answer "Yes" when asked for
-       Module Support, and selecting a folder where your modules will live
-       in (the default path is safe for most people).
+    1. If modules are supported by your system, they will be configured
+       automatically when you run ./Config. The modules will be installed
+       to the modules directory in your data path (by default this will
+       be ~/services/modules).
 
        Notes:
 
        * Modules are not supported on the following platforms: OpenBSD, Windows.
-       * You might need to run "make distclean" prior to running ./configure
+       * You might need to run "make distclean" prior to running ./Config
 
-    2. Compile Anope as usual. The gmake process will now compile module
+    2. Compile Anope as usual. The (g)make process will now compile module
        support into Anope, and compile the default sample modules, and/or
        any other module located on the "modules" folder.
 
@@ -79,16 +79,15 @@ More Modules:
     You can download more useful modules from http://www.anope.org/ or from
     our interim modules development website http://modules.anope.org/. Just
     grab the module file (usually with a .c extension). Place the module
-    file on your compile "modules" folder. The same folder that contain both
+    file on your compile "src/modules" folder. The same folder that contain both
     hs_moo.c and catserv.c module files.
 
     The new modules need to be compiled and installed before you can make
     use of them:
-
-    1. Change directories to your compile "modules" folder.
-    2. Run ./configure
-    3. Run make
-    4. Run make install
+    
+    1. Make sure you're in the main source directory.
+    2. Run `make modules` to compile any new or changed modules.
+    3. Run `make install` to install the modules.
 
     You can now use /msg OperServ MODLOAD to load the new modules.
 
diff --git a/docs/MYSQL b/docs/MYSQL
index fe87e03fc..20e166c14 100644
--- a/docs/MYSQL
+++ b/docs/MYSQL
@@ -38,16 +38,16 @@ Requirements:
 
 Installation:
 
-    1. You need to configure Anope to be compiled with MySQL support. To 
-       do so you must run ./configure and answer "Yes" when asked for
-       MySQL Support.
+    1. The ./Config script automatically detects if your system is capable
+       of running Anope with MySQL support. There is no need anymore to
+       answer yes when asked.
 
        Notes:
 
        * MySQL is not supported on the following platforms: Windows.
-       * You might need to run "make distclean" prior to running ./configure
+       * You might need to run "make distclean" prior to running ./Config
 
-    2. Compile Anope as usual. The gmake process will now compile MySQL
+    2. Compile Anope as usual. The (g)make process will now compile MySQL
        support into Anope.
 
     3. Install Anope as usual. 
diff --git a/docs/README b/docs/README
index 5f5d05271..362de197a 100644
--- a/docs/README
+++ b/docs/README
@@ -66,7 +66,7 @@ Anope credits:
     Trystan .S Lee <trystan@anope.org>
     openglx <openglx@brasnerd.com.br>
 Anope Translations:
-    GeniusDex (nl.l)
+    GeniusDex <geniusdex@anope.org> (nl.l)
     Oleg Nikolaev aka Isot <isot@complife.ru> (ru.l)
     Stuff <the.stuff@gmx.de> (de.l)
     DrStein (es.l)
@@ -124,7 +124,7 @@ Currently available services are:
 
 Anope currently works with:
   - DreamForge 4.6.7
-  - Bahamut 1.4.35 or later
+  - Bahamut 1.4.35 or later (including 1.8)
   - UnrealIRCd 3.1.1 or later (including 3.2)
   - UltimateIRCd 2.8.2 or later (including 3.0.0)
   - ViagraIRCd 1.3 or later
@@ -133,7 +133,8 @@ Anope currently works with:
   - RageIRCd 2.0 beta-3 or later
 
 Anope could also work with some of the daemons derived by the ones 
-listed above.
+listed above, but there's no support for them if they work or don't
+work.
 
 
 3. INSTALLATION
diff --git a/version.log b/version.log
index 6d45cc099..173c59b67 100644
--- a/version.log
+++ b/version.log
@@ -8,10 +8,14 @@
 VERSION_MAJOR="1"
 VERSION_MINOR="7"
 VERSION_PATCH="5"
-VERSION_BUILD="313"
+VERSION_BUILD="315"
 
 # $Log$
 #
+# BUILD : 1.7.5 (315)
+# BUGS  : 
+# NOTES : Updated documentation to suit the new build process
+#
 # BUILD : 1.7.5 (313)
 # BUGS  : none
 # NOTES : Anope 1.7.5 Release