Removed old example.conf and replaced with example_new.conf, services.conf will now be read by the new parser and not services_new.conf

git-svn-id: http://anope.svn.sourceforge.net/svnroot/anope/trunk@1764 5417fbe8-f217-4b02-8779-1006273d7864

3 files changed, 1520 insertions, 3041 deletions

diff --git a/data/example.conf b/data/example.conf
index b791a9793..d66a1efe6 100644
--- a/data/example.conf
+++ b/data/example.conf
@@ -1,1518 +1,1517 @@
-# Example configuration file for Services.  After making the appropriate
-# changes to this file, place it in the Services data directory (as
-# specified in the "configure" script, default /home/username/services)
-# under the name "services.conf".
-#
-# The format of this file is fairly simple: a line beginning with a # is a
-# comment, and any other non-blank line is expected to be a directive and
-# parameters, separated by spaces or tabs.  For example:
-#
-#   Directive Parameter-1 Parameter-2 ...
-#
-# Directives are case-insensitive.  Note that some directives do not take
-# any parameters; these are typically "on-off" directives, for which simply
-# including the directive in this file (or removing it) has an effect on
-# Services' functionality.
-#
-# If a parameter's value is a string which includes spaces, enclose the
-# string in double quotation marks, like the example below.  Quotes may be
-# used around any string at all for clarity.
-#
-#   "This is a parameter string with spaces in it"
-#
-# If you need to include a double quote inside a quoted string, precede it
-# by a backslash:
-#
-#   "This string has \"double quotes\" in it"
-#
-# Time parameters can be specified either as an integer representing a
-# number of seconds (e.g. "3600" = 1 hour), or as an integer with a unit
-# specifier: "s" = seconds, "m" = minutes, "h" = hours, "d" = days.
-# Combinations (such as "1h30m") are not permitted.  Examples (all of which
-# represent the same length of time, one day):
-#
-#   "86400", "86400s", "1440m", "24h", "1d"
-#
-# CAUTION:
-# Please note that your services might _CRASH_ if you add more format-
-# strings (%s, %d, etc.) to custom messages than Anope needs. Use the
-# default messages to see how many format-strings are needed. 
-#
-# In the documentation for each directive, one of the following will be
-# included to indicate whether an option is required:
-#
-# [REQUIRED]
-#     Indicates a directive which must be given.  Without it, Services will
-#     not start.
-#
-# [RECOMMENDED]
-#     Indicates a directive which may be omitted, but omitting it may cause
-#     undesirable side effects.
-#
-# [OPTIONAL]
-#     Indicates a directive which is optional.  If not given, the feature
-#     will typically be disabled.  If this is not the case, more
-#     information will be given in the documentation.
-#
-# [DISCOURAGED]
-#     Indicates a directive which may cause undesirable side effects if
-#     specified.
-#
-# [DEPRECATED]
-#     Indicates a directive which will disappear in a future version of
-#     Services, usually because its functionality has been either
-#     superseded by that of other directives or incorporated into the main
-#     program.
-
-###########################################################################
-#
-# IRCD configuration
-#
-###########################################################################
-
-# IRCDModule <module_name>  [REQUIRED]
-#     The ircd protocol module should be used when connecting anope to your
-#     chosen IRCD.  This should be one of the following options, or a file 
-#     provided by your IRCD author.
-#
-#     Bahamut 1.4.27 [or later]         - "bahamut"
-#     Charybdis 1.0 [or later]          - "charybdis"
-#     DreamForge 4.6.7                  - "dreamforge"
-#     Hybrid IRCd 7.0 [experimental]    - "hybrid"
-#     InspIRCd 1.0 [beta 5 or later]    - "inspircd10"
-#     InspIRCd 1.1 [beta 8 or later]    - "inspircd11"
-#     Plexus 3.0 [or later]             - "plexus3"
-#     Plexus 2.0 [or later]             - "plexus2"
-#     PTLink 6.15.0 [experimental]      - "ptlink"
-#     RageIRCd 2.0.x                    - "rageircd"
-#     Ratbox 2.0.6 [or later]           - "ratbox"
-#     ShadowIRCD 4.0x [beta 7 or later] - "shadowircd"
-#     Solid IRCD 3.4.x [3.4.6 or later] - "solidircd"
-#     UltimateIRCd 3.0.0 [or later]     - "ultimate3"
-#     UltimateIRCd 2.8.2 [or later]     - "ultimate2"
-#     Unreal 3.2 [beta-19 or later]     - "unreal32"
-#     Unreal 3.1.1 [or later]           - "unreal31"
-#     ViagraIRCd 1.3.x [or later]       - "viagra"
-#
-
-#IRCDModule "unreal32"
-
-###########################################################################
-#
-# Encryption settings
-#
-###########################################################################
-
-# EncModule <module_name>  [REQUIRED]
-#     The encryption module to use when dealing with passwords.
-#     This determines how the passwords are stored in the databases,
-#     and does not add any security as far as transmitting passwords over
-#     the network goes.
-#     enc_none provides no password encryption, storing the password in
-#     plain text, this is the most versiatle as passwords can easily be
-#     recovered.
-#
-#     NOTE: users of anope's previous (broken) md5 implementation should 
-#     select the enc_old option, or things may break.
-#
-#     NOTE2: Some of these encryption methods are one-way (md5, sha1, old)
-#     meaning that you can NOT retrieve the passwords in plain text once
-#     encrypted.
-#
-#     Plain Text                -  enc_none
-#     Previous (broken) MD5     -  enc_old
-#     MD5                       -  enc_md5 
-#     SHA1                      -  enc_sha1
-#
-
-EncModule "enc_none"
-
-###########################################################################
-#
-# Core module configuration
-#
-###########################################################################
-# HostCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of HostServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-HostCoreModules "hs_help hs_on hs_off hs_group hs_list hs_set hs_setall hs_del hs_delall"
-
-# MemoCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of MemoServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-MemoCoreModules "ms_send ms_cancel ms_list ms_read ms_del ms_set ms_info ms_rsend ms_check ms_staff ms_sendall ms_help"
-
-# HelpCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of HelpServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-HelpCoreModules "he_help"
-
-# BotCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of BotServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-BotCoreModules "bs_help bs_botlist bs_assign bs_set bs_kick bs_badwords bs_act bs_info bs_say bs_unassign bs_bot bs_fantasy bs_fantasy_kick bs_fantasy_kickban bs_fantasy_owner bs_fantasy_seen"
-
-# OperCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of OperServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-OperCoreModules "os_help os_global os_stats os_oper os_admin os_staff os_mode os_kick os_clearmodes os_akill os_sgline os_sqline os_szline os_chanlist os_userlist os_logonnews os_randomnews os_opernews os_session os_noop os_jupe os_ignore os_set os_reload os_update os_restart os_quit os_shutdown os_defcon os_chankill os_svsnick os_oline os_umode os_modload os_modunload os_modlist os_modinfo"
-
-# NickCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of NickServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-NickCoreModules "ns_help ns_register ns_group ns_identify ns_access ns_set ns_saset ns_drop ns_recover ns_release ns_sendpass ns_ghost ns_alist ns_info ns_list ns_logout ns_status ns_update ns_getpass ns_getemail ns_forbid ns_suspend"
-
-# ChanCoreModules <list> [RECOMMENDED]
-#     These modules will be loaded as part of ChanServ's core.
-#     It is not recommended you change these settings unless you are 
-#     sure you understand exactly what it is you are doing.
-ChanCoreModules "cs_help cs_register cs_identify cs_set cs_xop cs_access cs_akick cs_drop cs_sendpass cs_ban cs_clear cs_modes cs_getkey cs_invite cs_kick cs_list cs_logout cs_topic cs_info cs_getpass cs_forbid cs_suspend cs_status"
-###########################################################################
-#
-# Remote server configuration
-#
-###########################################################################
-
-# RemoteServer <hostname> <port> <password>  [REQUIRED]
-#     Specifies the remote server hostname and port.  The hostname may
-#     either be a standard Internet hostname or dotted-quad numeric
-#     address; the port number must be an integer between 1 and 65535
-#     inclusive.  The password is a string which should be enclosed in
-#     double quotes if it contains any spaces (or just for clarity).
-#
-#     The remote server and port may be overridden at runtime with the
-#     -remote command-line option.  The password may not be set at runtime.
-#
-#     If services can't connect to the RemoteServer, they will try
-#     RemoteServer2 (if defined). If they can't connect to RemoteServer2,
-#     they will use RemoteServer3 (if defined).
-
-RemoteServer    localhost 6667 "mypass"
-#RemoteServer2  localhost 6667 "mypass"
-#RemoteServer3  localhost 6667 "mypass"
-
-# LocalAddress <hostname> [port]  [OPTIONAL]
-#     Specifies the local address to bind to before connecting to the
-#     remote server.  This may be useful on multihomed hosts.  The hostname
-#     and port number are specified the same way as with the RemoteServer
-#     directive.  If this is not specified, Services will let the operating
-#     system choose the local address.  If only a hostname is specified,
-#     Services will bind to that address but let the operating system
-#     choose the local port number.
-#
-#     If you don't know what this means or don't need to use it, just leave
-#     the directive commented out.
-#
-#     This directive may be overridden at runtime by the -local
-#     command-line option.
-
-#LocalAddress   nowhere. 0
-
-###########################################################################
-#
-# Services identification and pseudoclient names
-#
-###########################################################################
-
-# ServerName <name>  [REQUIRED]
-#     Specifies the IRC server name which Services should use.  May be
-#     overridden by the -name command-line option.
-
-ServerName  "services.localhost.net"
-
-# ServerDesc <text>  [REQUIRED]
-#     Specifies the text which should appear as the server's information in
-#     /whois and similar queries.  May be overridden by the -desc
-#     command-line option.
-
-ServerDesc  "Services for IRC Networks"
-
-# ServiceUser <usermask>  [REQUIRED]
-#     Specifies the user@host mask which should be used by the Services
-#     pseudoclients.  May be overridden by the -user and -host command-line
-#     options.
-
-ServiceUser "services@localhost.net"
-
-# ...Name <nick> <string>  [REQUIRED except as noted below]
-#     Specify the nicknames (first parameter) and "real" names (second
-#     parameter) for the Services pseudoclients.  BotServ and DevNull may
-#     be disabled by commenting out the appropriate lines below. Disabling
-#     BotServ is recommended on large networks.
-
-NickServName    "NickServ"  "Nickname Server"
-ChanServName    "ChanServ"  "Channel Server"
-MemoServName    "MemoServ"  "Memo Server"
-BotServName     "BotServ"   "Bot Server"
-HelpServName    "HelpServ"  "Help Server"
-OperServName    "OperServ"  "Operator Server"
-GlobalName      "Global"    "Global Noticer"
-#DevNullName     "DevNull"   "/dev/null -- message sink"
-HostServName	"HostServ"  "vHost Server"
-
-# ...Alias <nick> <string>  [OPTIONAL]
-#     Specify alternate nicknames for services. When a user will /msg 
-#     NickServAlias something, it will be forwarded to NickServName, and
-#     NickServName will answer. This can be used to ease the migration
-#     from another network, for example if your services are called
-#     NickKeeper, ChanKeeper, etc ... and the other network calls them
-#     NickServ, ChanServ, etc ...
-
-#NickServAlias    "NickServ2"  "Nickname Server Forwarder"
-#ChanServAlias    "ChanServ2"  "Channel Server Forwarder"
-#MemoServAlias    "MemoServ2"  "Memo Server Forwarder"
-#BotServAlias     "BotServ2"   "Bot Server Forwarder"
-#HelpServAlias    "HelpServ2"  "Help Server Forwarder"
-#OperServAlias    "OperServ2"  "Operator Server Forwarder"
-#GlobalAlias      "Global2"    "Global Noticer Forwarder"
-#DevNullAlias     "DevNull2"   "/dev/null -- message sink Forwarder"
-#HostServAlias    "HostServ2"  "vHost Server Forwarder"
-
-###########################################################################
-#
-# Services data filenames
-#
-###########################################################################
-
-# NOTE: All filenames are relative to the Services data directory.
-
-# PIDFile <filename>  [REQUIRED]
-#     Specifies the name of the file containing Services' process ID.
-
-PIDFile     services.pid
-
-# MOTDFile <filename>  [REQUIRED]
-#     Specifies the name of the Message of the Day file.
-
-MOTDFile    services.motd
-
-# ...DB <filename>  [REQUIRED]
-#     Specifies the filenames for the various Services subsystems' databases.
-
-NickServDB  nick.db
-#PreNickServDB prenick.db
-ChanServDB  chan.db
-BotServDB   bot.db
-OperServDB  oper.db
-NewsDB      news.db
-ExceptionDB exception.db
-HostServDB  hosts.db
-
-# There is no more databases for AKILLs. This setting is kept to allow
-# you to import old AKILL database, and is optional. (If not given,
-# Services will look for a file named akill.db.)
-
-# AutokillDB    akill.db
-
-###########################################################################
-#
-# Network information
-#
-###########################################################################
-
-# HelpChannel <channel> [OPTIONAL]
-#
-#     When defined, every users that has or gets op status on this channel 
-#     automatically receive the +h user mode.
-
-HelpChannel "#help"
-
-# LogChannel <channel> [OPTIONAL]
-#
-#     When defined, services will output log messages to this channel.
-#     IMPORTANT: This can be a security risk so make certain this channel
-#     is sufficiently protected from normal access.
-
-#LogChannel "#services"
-
-# LogBot [OPTIONAL]
-#
-#     When defined, services will output all BotServ chatter to the defined
-#     LogChan above. It shows all uses of BotServ ACT and SAY commands. Note
-#     that there is no logging to the log file. Only works if LogChannel is
-#     also defined.
-
-#LogBot
-
-# NetworkName <name> [REQUIRED]
-# 
-#     This is the name of the network the Services are running on.
-
-NetworkName "LocalNet"
-
-# Numeric [OPTIONAL]
-#     Many ircd identify themselves with a Numeric ID when using this option
-#     consult your ircds documentation before using this
-#Numeric "64"
-
-# NickLen [RECOMMENDED]
-#     Set this to the maximum allowed nick length on your network. Anope does
-#     not support values larger than 31, so setting them makes no sense. Be
-#     sure to set this correctly, as setting this wrong can result in services
-#     being disconnected from the network.
-
-NickLen 31
-
-###########################################################################
-#
-# Basic functionality
-#
-###########################################################################
-
-# UserKey1|2|3 <value> [RECOMMENDED]
-#
-#     These keys are required to initiate the random number generator. These
-#     numbers MUST be random as you want your passcodes to be random. Don't
-#     give these keys to anyone! Keep them private!
-#
-#     *** NOTE ***
-#     If you don't enable these, or keep their default values, any talented
-#     programmer would be able to easily "guess" random strings used to mask
-#     information. Be safe, and come up with three different 7 digit numbers
-
-#UserKey1 9866235
-#UserKey2 8362013
-#UserKey3 2362899
-
-# NoBackupOkay  [DISCOURAGED]
-#     Allows Services to continue file write operations (i.e. database
-#     saving) even if the original file cannot be backed up.  Enabling this
-#     option may allow Services to continue operation under some conditions
-#     when it might otherwise fail, such as a nearly-full disk.
-#
-#     *** NOTE ***
-#     Enabling this option can cause irrecoverable data loss under some
-#     conditions, so make CERTAIN you know what you're doing when you
-#     enable it!
-
-#NoBackupOkay
-
-# StrictPasswords  [RECOMMENDED]
-#     When enabled, causes Services to perform more stringent checks on
-#     passwords.  If this is disabled, Services will only disallow a
-#     password if it is the same as the entity (nickname or channel name)
-#     with which it is associated.  When enabled, however, Services will
-#     also check that the password is at least five characters long, and
-#     in the future will probably check other things as well.
-
-StrictPasswords
-
-# BadPassLimit <count>  [RECOMMENDED]
-#     Sets the number of invalid password tries before Services removes a
-#     user from the network.  If a user enters <count> invalid passwords
-#     for any Services function or combination of functions during a
-#     single IRC session (subject to BadPassTimeout, below), Services will
-#     issue a /KILL for the user.  If not given, Services will ignore
-#     failed password attempts (though they will be logged in any case).
-
-BadPassLimit    5
-
-# BadPassTimeout <time>  [OPTIONAL]
-#     Sets the time after which invalid passwords are forgotten about.  If
-#     a user does not enter any incorrect passwords in this amount of time,
-#     the incorrect password count will reset to zero.  If not given, the
-#     timeout will be disabled, and the incorrect password count will never
-#     be reset until the user disconnects.
-
-BadPassTimeout  1h
-
-# UpdateTimeout <time>  [REQUIRED]
-#     Sets the delay between automatic database updates.  This timer is
-#     reset by the OperServ UPDATE command.
-
-UpdateTimeout   5m
-
-# ExpireTimeout <time>  [REQUIRED]
-#     Sets the delay between checks for expired nicknames and channels.
-#     The OperServ UPDATE command will also cause a check for expiration
-#     and reset this timer.
-
-ExpireTimeout   30m
-
-# ReadTimeout <time>  [REQUIRED]
-#     Sets the timeout period for reading from the network.
-
-ReadTimeout 5s
-
-# WarningTimeout <time>  [REQUIRED]
-#     Sets the interval between sending warning messages for program
-#     errors via WALLOPS/GLOBOPS.
-
-WarningTimeout  4h
-
-# TimeoutCheck <time>  [REQUIRED]
-#     Sets the (maximum) frequency at which the timeout list is checked.
-#     This, combined with ReadTimeout above, determine how accurately timed
-#     events, such as nick kills, occur; it also determines how much CPU
-#     time Services will use doing this.  Higher values will cause less
-#     accurate timing but less CPU usage.
-#
-#     This shouldn't be set any higher than 10 seconds, and 1 second is
-#     best if your system is powerful enough (or your network small enough)
-#     to handle it.  0 will cause the timeout list to be checked every time
-#     through the main loop, which will probably slow down Services too
-#     much to be useful on most networks.
-#
-#     Note that this value is not an absolute limit on the period between
-#     checks of the timeout list; the period may be as great as ReadTimeout
-#     (above) during periods of inactivity.
-
-TimeoutCheck    3s
-
-# KeepLogs <days> [RECOMMENDED]
-#
-#     Sets the number of days log files are kept. If you don't give it, or if
-#     you set it to 0, logs will be kept indefinitely.
-#
-#     NOTE: Services must run 24 hours a day for this feature to work.
-
-KeepLogs 7
-
-# KeepBackups <days> [RECOMMENDED]
-#
-#     Sets the number of days backups of databases are kept. If you don't give
-#     it, or if you set it to 0, Services won't backup the databases.
-#
-#     NOTE: Services must run 24 hours a day for this feature to work.
-
-KeepBackups 3
-
-# ForceForbidReason [OPTIONAL]
-#
-#     If set, Services will require a reason when a forbid is added, else
-#     the reason is optional. This directive also applies to SUSPENDed
-#     channels as well.
-
-ForceForbidReason
-
-# UsePrivmsg [OPTIONAL]
-#
-#    This directive allows users to let Services send PRIVMSGs to them
-#    instead of NOTICEs. Also see NSDefMsg, which also toggles the default
-#    communication (PRIVMSG or NOTICE) to use for unregistered users.
-#
-#    This is a feature that is against the IRC RFC and should be used 
-#    _only_ if absolutely necessary.
-
-#UsePrivmsg
-
-# UseStrictPrivMsg [OPTIONAL]
-#    Using this directive will force services to only respond to privmsgs
-#    addressed to Nick@ServerName - e.g. NickServ@localhost.net.
-#    This should be used on conjunction with ircd aliases.
-#
-#    When using Bahamut, this option will NOT work if the uplink server is
-#    configured as a services hub. The serviceshub option is not designed to
-#    be used with Anope.
-
-#UseStrictPrivMsg
-
-# DumpCore [OPTIONAL]
-#
-#    Setting this directive will make Anope dump core when a segmentation
-#    fault occurs. This is generally not needed, but if Anope is crashing
-#    on your network and you want to make a bug report, having a core
-#    file may be of great help.
-
-#DumpCore
-
-# LogUsers [OPTIONAL]
-#
-#    Defines whether Anope will log user connections, disconnections and
-#    nickname changes. You may have to do so in case you ever need to
-#    transmit user information to your local authorities.
-
-#LogUsers
-
-# HideStatsO [OPTIONAL]
-#
-#    Setting this directive will make Services only show Stats o to
-#    IRC Operators.
-
-#HideStatsO
-
-# GlobalOnCycle [OPTIONAL]
-#
-#    Setting this directive will make Services send global messages on
-#    starting up and shutting down/restarting.
-
-#GlobalOnCycle
-
-# GlobalOnCycleMessage <text> [REQUIRED if GlobalOnCycle is specified]
-#     This is the global message sent when the Services are
-#     being shutdown/restarted if using GlobalOnCycle
-GlobalOnCycleMessage "Services are restarting, they will be back shortly - please be good while we're gone"
-
-# GlobalOnCycleUP <text> [OPTIONAL]
-#     If defined this message will be sent global when the services join
-#     the network.
-GlobalOnCycleUP "Services are now back online - have a nice day"
-
-# AnonymousGlobal [OPTIONAL]
-#     hides the oper's nick in a global message/notice
-#AnonymousGlobal
-
-# NickRegDelay <seconds> [OPTIONAL]
-#     Prevents users from regging their nick if they are not
-#     connected for at least X seconds.
-#NickRegDelay 30
-
-# UseSVSHOLD [OPTIONAL]
-#     Allows networks running Bahamut (1.4.35 or later), Unreal (3.2),
-#     and Plexus (3.0) to use SVSHOLD instead of the services enforcer.
-#     This option places a temporary Q:Line on the held nick instead
-#     of introducing a new pseudoclient with that nick, which is better
-#     for both CPU and bandwidth. If you enable this option on an
-#     incompatible IRCd (like a pre-1.4.35 Bahamut), it is most likely
-#     to break.
-#UseSVSHOLD
-
-# RestrictOperNick [OPTIONAL]
-#     Forbids the registration of nicks that contain nick with services
-#     access. So if Tester is a Services Oper, for example, You can't
-#     register NewTester or Tester123 unless you are an IRC operator.
-#     IMPORTANT: Remember that you have to be an ircop if you want to
-#                register the root's nick when setting up Anope for the
-#                the first time.
-#RestrictOperNicks
-
-# NewsCount [OPTIONAL]
-#     The number of LOGON/OPER News item to display when a user logs
-#     on. The default value is 3
-#NewsCount 3
-
-# UnRestrictSAdmin [OPTIONAL]
-#     On many ircd Anope removes the umode of +a from users whom are not
-#     Service Admin in Anope. This mode is NOT used by Anope for any form
-#     of access. Thus this option allows them to keep the mode without having
-#     to be a Service Admin in Anope
-#UnRestrictSAdmin
-
-# UlineServers  [OPTIONAL]
-#
-# A list of ulined servers on your network, these servers are assumed they
-# can set channel modes and we will not attempt to take them from them
-# WARNING: do not put your user servers in this option
-
-UlineServers "stats.your.network proxy.your.network"
-
-# UseTS6  [OPTIONAL]
-#
-# Modern hybrid ircd like Ratbox 2.0.x support a protocol called TS6. 
-# However this protocol is optional thus our default support is for without 
-# TS6, if you want to take advantage of TS6, enable this option.
-
-#UseTS6
-
-###########################################################################
-#
-# Mail-related options
-#
-###########################################################################
-
-# NOTE: if UseMail is not set, all parameters after it in this section
-# are optional.
-
-# UseMail [OPTIONAL]
-#
-# This option enables the mail commands in Services. You may choose
-# to disable it if you have no sendmail-compatible mailer installed.
-# This setting is [REQUIRED] if NSEmailReg is enabled.
-
-UseMail
-
-# SendMailPath <path> [REQUIRED]
-#
-# This is how we should call SendMail to send a mail. It must be
-# called with all parameters needed to make it scan the mail input
-# to find the mail recipient; consult your SendMail documentation.
-#
-# Postfix users must use the compatible sendmail utility provided
-# with it; this one usually needs no parameters on the command line.
-# Most sendmail applications (or replacements of it) require the -t
-# option to be used.
-
-SendMailPath "/usr/sbin/sendmail -t"
-
-# SendFrom <e-mail> [REQUIRED]
-#
-# This is the e-mail from which all the e-mails are to be sent. It should
-# really exist.
-
-SendFrom services@localhost.net
-
-# RestrictMail [OPTIONAL]
-#
-# When enabled, SENDPASS will be restricted to IRC operators.
-#
-# WARNING: if you choose to not enable this option, you should limit
-# the number of processes the services user can have at a time (you can
-# create a special user for this; remember to never launch Services as root).
-
-RestrictMail
-
-# MailDelay <time> [RECOMMENDED]
-#
-# This controls the minimum amount of time an user must wait before sending
-# another mail after it has sent one. It also controls the minimum time
-# an user must wait before it can receive another mail.
-#
-# This feature prevents users from being mail bombed using Services and
-# should definitely be used.
-
-MailDelay 5m
-
-# DontQuoteAddresses [OPTIONAL]
-#
-# When enabled, services will not attempt to "" the TO: fields in mails
-#
-# So far we only know of ESMTP/QMail which need this set.
-#
-
-#DontQuoteAddresses
-
-###########################################################################
-#
-# NickServ configuration
-#
-###########################################################################
-
-# NSForceEmail [RECOMMENDED]
-#     This option forces the users to give an e-mail when they register
-#     a nickname. If you have nicks in the database that have no e-mail
-#     set, they will be asked to set an e-mail when they identify their
-#     nickname until they set one. Also, this option prevents user from
-#     unsetting the password. This setting is [REQUIRED] if NSEmailReg
-#     is enabled.
-#
-#     This option is useful to resolve "lost password" problems.
-
-NSForceEmail
-
-# NSEmailReg [OPTIONAL]
-#      This option splits the nick registration into 2 steps,  the first
-#      after registering a email with a passcode is sent to the supplied
-#      email address, this passcode needs to be entered with a confirm
-#      command before the nick registration will be completed.
-#
-#      You must have mail / forcemail set for this to work correctly.
-#      It is also recommended that MailDelay be set to a sensible value
-#      to prevent mail flooding. This setting is [REQUIRED] if NSEmailReg
-#      is enabled.
-
-# NSEmailReg
-
-# NSDef...  [OPTIONAL]
-#     Sets the default options for newly registered nicks.  Note that
-#     changing these options will have no effect on nicks which are already
-#     registered.
-#
-#     If both NSDefKill and NSDefKillQuick are given, the latter takes
-#     precedence.  KILL IMMED cannot be specified as a default.
-#
-#     Note: Both NSDefKill and NSDefKillQuick must be specified for Quick to take effect.
-#
-#     NSDefMsg also controls the default setting for unregistered users.
-#     If NSDefMsg is enabled, unregistered users will receive PRIVMSGs
-#     instead of NOTICEs from Services. See UsePrivmsg for more information.
-#
-#     NOTE:  If you do not enable any of these options, a default of
-#     Secure, MemoSignon, and MemoReceive will be used, for backward
-#     compatibility.  If you really want no options enabled by default, use
-#     NSDefNone.
-
-#NSDefNone
-
-#NSDefKill
-#NSDefKillQuick
-NSDefSecure
-NSDefPrivate
-NSDefHideEmail
-NSDefHideUsermask
-#NSDefHideQuit
-#NSDefMsg
-NSDefMemoSignon
-NSDefMemoReceive
-NSDefAutoop
-
-# NSDefLanguage <language-number> [REQUIRED]
-#     Sets the default language non- and newly-registered will receive
-#     services' messages in. The numbers are the same as those
-#     used for the /nickserv SET LANGUAGE command, so look the at the help
-#     of this command for the list of currently supported languages.
-#     
-#     If you ever wanted to know how to translate services in your 
-#     language, read the chapter about it in the README.
-
-NSDefLanguage 1
-
-# NSRegDelay <time>  [RECOMMENDED]
-#     Sets the minimum length of time between consecutive uses of the
-#     REGISTER command.  If not given, this restriction is disabled (note
-#     that this allows "registration flooding").
-
-NSRegDelay  30s
-
-# NSResendDelay <time>  [RECOMMENDED]
-#     Sets the minimum length of time between consecutive uses of the
-#     RESEND command.  If not given, this restriction is disabled (note
-#     that this allows "resend flooding" or "mail bombing").
-
-NSResendDelay  90s
-
-# NSExpire <time>  [RECOMMENDED]
-#     Sets the length of time before a nick registration expires.
-
-NSExpire    21d
-
-# NSRExpire <time> [OPTIONAL]
-#     Sets the length of time a user gets to enter the confirmation code
-#     which has been e-mailed to them before the nick will be released
-#     for general use again. This setting is [REQUIRED] if NSEmailReg is
-#     enabled.
-
-# NSRExpire 1d
-
-# NSMaxAliases <number> [RECOMMENDED]
-#     Sets the maximum number of nicks allowed in a group. If you
-#     set it to 0, or don't set it at all, no limits will be applied.
-
-NSMaxAliases    16
-
-# NSAccessMax <count>  [REQUIRED]
-#     Sets the maximum number of entries allowed on a nickname access list.
-
-NSAccessMax 32
-
-# NSEnforcerUser <user>[@<host>]  [REQUIRED]
-#     Sets the username (and possibly hostname) used for the fake user
-#     created when NickServ collides a user.  Should be in user@host
-#     format.  If the host is not given, the one from ServicesUser is
-#     used.
-
-NSEnforcerUser  enforcer@localhost.net
-#NSEnforcerUser enforcer
-
-# NSReleaseTimeout <time>  [REQUIRED]
-#     Sets the delay before a NickServ-collided nick is released.
-
-NSReleaseTimeout 1m
-
-# NSAllowKillImmed  [OPTIONAL]
-#     When enabled, allows the use of the IMMED option with the NickServ
-#     SET KILL command.
-
-#NSAllowKillImmed
-
-# NSNoGroupChange [OPTIONAL]
-#   When enabled, the NickServ GROUP command won't allow any group change.
-#   This is recommended for better performances and to protect against
-#   nick stealing, however users will have less flexibility.
-
-#NSNoGroupChange
-
-# NSListOpersOnly  [OPTIONAL]
-#     When enabled, limits use of the NickServ LIST command to IRC
-#     operators.
-
-#NSListOpersOnly
-
-# NSListMax <count>  [REQUIRED]
-#     Specifies the maximum number of nicks to be returned for a NickServ
-#     LIST command.
-
-NSListMax   50
-
-# NSGuestNickPrefix <value>  [REQUIRED]
-#     When a user's nick is forcibly changed to enforce a "nick kill", their
-#     new nick will start with this value. The rest will be made up of 6 or 7
-#     digits.
-
-NSGuestNickPrefix   "Guest"
-
-# NSSecureAdmins  [RECOMMENDED]
-#     When enabled, prevents the use of the DROP, FORBID, GETPASS, and
-#     SET PASSWORD commands by Services admins on other Services admins or
-#     the Services root(s).
-
-NSSecureAdmins
-
-# NSStrictPrivileges [RECOMMENDED]
-#
-# When enabled, any user wanting to use the privileges of Services Root, Services
-# Admin or Services Operator must have been logged as an IRC Operator with the
-# /oper command.
-
-NSStrictPrivileges
-
-# NSModeOnID  [OPTIONAL]
-#
-# When enabled, services will set the channel modes a user has access to upon
-# identifying, assuming they are not already set.
-#
-
-# NSModeOnID
-
-# NSRestrictGetPass  [OPTIONAL]
-#
-# When enabled, services will only allow Services Root to use the getpass
-# command on a nick.
-
-NSRestrictGetPass
-
-# NSNickTracking  [OPTIONAL]
-#
-# When enabled, services will track your last nick identified when issuing
-# nick changes.
-
-#NSNickTracking
-
-# NSAddAccessOnReg  [OPTIONAL]
-#
-# When enabled, services will add the usermask of registering users to the
-# access list of their newly created account. If you disable this, users
-# will always have to identify to nickserv before being recognized, unless
-# they manually add an address to the access list of their account.
-
-NSAddAccessOnReg
-
-###########################################################################
-#
-# ChanServ configuration
-#
-###########################################################################
-
-# CSDef...  [OPTIONAL]
-#     Sets the default options for newly registered channels.  Note that
-#     changing these options will have no effect on channels which are 
-#     already registered.
-#
-#     NOTE:  If you do not enable any of these options, a default of
-#     KeepTopic, Secure, SecureFounder and SignKick will be used, for 
-#     backward compatibility.  If you really want no options enabled by 
-#     default, use CSDefNone.
-
-#CSDefNone
-
-CSDefKeepTopic
-#CSDefOpNotice
-CSDefPeace
-#CSDefPrivate
-#CSDefRestricted
-CSDefSecure
-#CSDefSecureOps
-CSDefSecureFounder
-CSDefSignKick
-#CSDefSignKickLevel
-#CSDefTopicLock
-CSDefXOP
-
-
-# CSMaxReg <count>  [RECOMMENDED]
-#     Limits the number of channels which may be registered to a single
-#     nickname.
-
-CSMaxReg    20
-
-# CSExpire <time>  [RECOMMENDED]
-#     Sets the number of days before a channel expires.
-
-CSExpire    14d
-
-# CSDefBantype <bantype> [REQUIRED]
-#
-# Sets the default ban type for newly registered channels (and when
-# importing old databases).
-#
-# bantype can be:
-# 
-# 0: ban in the form *!user@host
-# 1: ban in the form *!*user@host
-# 2: ban in the form *!*@host
-# 3: ban in the form *!*user@*.domain
-
-CSDefBantype 2
-
-# CSAccessMax <count>  [REQUIRED]
-#     Sets the maximum number of entries on a channel's access list.
-#     Channel access lists may contain only registered nicknames;
-#     therefore, checking each entry on the list requires only a single
-#     scaler comparison instead of a wildcard match, and this limit may be
-#     safely set much higher than (for example) the nickname access list
-#     size limit without impacting performance significantly.
-
-CSAccessMax 1024
-
-# CSAutokickMax <count>  [REQUIRED]
-#     Sets the maximum number of entries on a channel's autokick list.
-
-CSAutokickMax   32
-
-# CSAutokickReason <text>  [REQUIRED]
-#     Sets the default reason for an autokick if none is given.
-
-CSAutokickReason "User has been banned from the channel"
-
-# CSInhabit <time>  [REQUIRED]
-#     Sets the length of time ChanServ stays in a channel after kicking a
-#     user from a channel s/he is not permitted to be in.  This only occurs
-#     when the user is the only one in the channel.
-
-CSInhabit   15s
-
-# CSListOpersOnly  [OPTIONAL]
-#     When enabled, limits use of the ChanServ LIST command to IRC
-#     operators.
-
-#CSListOpersOnly
-
-# CSLis