Update more IRCServices references to reflect the current project.

- If referring to the specific piece of software use "Anope".
- If referring to services in general use "services".

1 files changed, 28 insertions, 28 deletions

diff --git a/data/stats.standalone.example.conf b/data/stats.standalone.example.conf
index e65a7d419..835101fee 100644
--- a/data/stats.standalone.example.conf
+++ b/data/stats.standalone.example.conf
@@ -1,7 +1,7 @@
 /*
- * Example configuration file for Services. After making the appropriate
- * changes to this file, place it in the Services conf directory (as
- * specified in the "configure" script, default /home/username/anope/conf)
+ * Example configuration file for Anope. After making the appropriate
+ * changes to this file, place it in the Anope conf directory (as
+ * specified in the "Config" script, default /home/username/anope/conf)
  * under the name "anope.conf".
  *
  * The format of this file is fairly simple: three types of comments are supported:
@@ -53,7 +53,7 @@
  * included to indicate whether an option is required:
  *
  * [REQUIRED]
- *     Indicates a directive which must be given. Without it, Services will
+ *     Indicates a directive which must be given. Without it, Anope will
  *     not start.
  *
  * [RECOMMENDED]
@@ -71,7 +71,7 @@
  *
  * [DEPRECATED]
  *     Indicates a directive which will disappear in a future version of
- *     Services, usually because its functionality has been either
+ *     Anope, usually because its functionality has been either
  *     superseded by that of other directives or incorporated into the main
  *     program.
  */
@@ -120,7 +120,7 @@ define
  * This section can be included multiple times, and Anope will attempt to
  * connect to each server until it finally connects.
  *
- * Each uplink IRCd should have a corresponding configuration to allow Services
+ * Each uplink IRCd should have a corresponding configuration to allow Anope
  * to link to it.
  *
  * An example configuration for InspIRCd that is compatible with the below uplink
@@ -158,20 +158,20 @@ define
 uplink
 {
 	/*
-	 * The IP or hostname of the IRC server you wish to connect Services to.
-	 * Usually, you will want to connect Services over 127.0.0.1 (aka localhost).
+	 * The IP or hostname of the IRC server you wish to connect Anope to.
+	 * Usually, you will want to connect over 127.0.0.1 (aka localhost).
 	 *
 	 * NOTE: On some shell providers, this will not be an option.
 	 */
 	host = "127.0.0.1"
 
 	/*
-	 * Enable if Services should connect using IPv6.
+	 * Enable if Anope should connect using IPv6.
 	 */
 	ipv6 = no
 
 	/*
-	 * Enable if Services should connect using SSL.
+	 * Enable if Anope should connect using SSL.
 	 * You must have an SSL module loaded for this to work.
 	 */
 	ssl = no
@@ -197,12 +197,12 @@ uplink
 /*
  * [REQUIRED] Server Information
  *
- * This section contains information about the Services server.
+ * This section contains information about the services server.
  */
 serverinfo
 {
 	/*
-	 * The hostname that Services will be seen as, it must have no conflicts with any
+	 * The hostname that Anope will be seen as, it must have no conflicts with any
 	 * other server names on the rest of your IRC network. Note that it does not have
 	 * to be an existing hostname, just one that isn't on your network already.
 	 */
@@ -212,11 +212,11 @@ serverinfo
 	 * The text which should appear as the server's information in /WHOIS and similar
 	 * queries.
 	 */
-	description = "Stats for IRC Networks"
+	description = "Anope IRC Statistics"
 
 	/*
-	 * The local address that Services will bind to before connecting to the remote
-	 * server. This may be useful for multihomed hosts. If omitted, Services will let
+	 * The local address that Anope will bind to before connecting to the remote
+	 * server. This may be useful for multihomed hosts. If omitted, Anope will let
 	 * the Operating System choose the local address. This directive is optional.
 	 *
 	 * If you don't know what this means or don't need to use it, just leave this
@@ -232,7 +232,7 @@ serverinfo
 	#id = "00A"
 
 	/*
-	 * The filename containing the Services process ID. The path is relative to the
+	 * The filename containing the Anope process ID. The path is relative to the
 	 * services root directory.
 	 */
 	pid = "data/anope.pid"
@@ -268,32 +268,32 @@ module
 /*
  * [REQUIRED] Network Information
  *
- * This section contains information about the IRC network that Services will be
+ * This section contains information about the IRC network that Anope will be
  * connecting to.
  */
 networkinfo
 {
 	/*
-	 * This is the name of the network that Services will be running on.
+	 * This is the name of the network that Anope will be running on.
 	 */
 	networkname = "LocalNet"
 
 	/*
 	 * Set this to the maximum allowed nick length on your network.
 	 * Be sure to set this correctly, as setting this wrong can result in
-	 * Services being disconnected from the network.
+	 * Anope being disconnected from the network.
 	 */
 	nicklen = 31
 
 	/* Set this to the maximum allowed ident length on your network.
 	 * Be sure to set this correctly, as setting this wrong can result in
-	 * Services being disconnected from the network.
+	 * Anope being disconnected from the network.
 	 */
 	userlen = 10
 
 	/* Set this to the maximum allowed hostname length on your network.
 	 * Be sure to set this correctly, as setting this wrong can result in
-	 * Services being disconnected from the network.
+	 * Anope being disconnected from the network.
 	 */
 	hostlen = 64
 
@@ -311,7 +311,7 @@ networkinfo
 	 * to services, such as BotServ bot hostnames and user vhosts. Changing this is not
 	 * recommended unless you know for sure your IRCd supports whatever characters you are
 	 * wanting to use. Telling services to set a vHost containing characters your IRCd
-	 * disallows could potentially break the IRCd and/or Services.
+	 * disallows could potentially break the IRCd and/or Anope.
 	 *
 	 * It is recommended you DON'T change this.
 	 */
@@ -336,22 +336,22 @@ networkinfo
 }
 
 /*
- * [REQUIRED] Services Options
+ * [REQUIRED] Anope Options
  *
- * This section contains various options which determine how Services will operate.
+ * This section contains various options which determine how Anope will operate.
  */
 options
 {
 	/*
 	 * On Linux/UNIX systems Anope can setuid and setgid to this user and group
-	 * after starting up. This is useful if Anope has to bind to privileged ports
+	 * after starting up. This is useful if Anope has to bind to privileged ports.
 	 */
 	#user = "anope"
 	#group = "anope"
 
 	/*
 	 * The case mapping used by services. This must be set to a valid locale name
-	 * installed on your machine. Services use this case map to compare, with
+	 * installed on your machine. Anope uses this case map to compare, with
 	 * case insensitivity, things such as nick names, channel names, etc.
 	 *
 	 * We provide two special casemaps shipped with Anope, ascii and rfc1459.
@@ -375,14 +375,14 @@ options
 	warningtimeout = 4h
 
 	/*
-	 * If set, Services will only show /stats o to IRC Operators. This directive
+	 * If set, Anope will only show /stats o to IRC Operators. This directive
 	 * is optional.
 	 */
 	#hidestatso = yes
 
 	/*
 	 * A space-separated list of U-lined servers on your network, it is assumed that
-	 * the servers in this list are allowed to set channel modes and Services will
+	 * the servers in this list are allowed to set channel modes and Anope will
 	 * not attempt to reverse their mode changes.
 	 *
 	 * WARNING: Do NOT put your normal IRC user servers in this directive.