diff options
Diffstat (limited to 'data')
| -rw-r--r-- | data/botserv.example.conf | 86 | ||||
| -rw-r--r-- | data/chanserv.example.conf | 105 | ||||
| -rw-r--r-- | data/chanstats.example.conf | 5 | ||||
| -rw-r--r-- | data/example.conf | 267 | ||||
| -rw-r--r-- | data/global.example.conf | 30 | ||||
| -rw-r--r-- | data/hostserv.example.conf | 52 | ||||
| -rw-r--r-- | data/memoserv.example.conf | 32 | ||||
| -rw-r--r-- | data/modules.example.conf | 84 | ||||
| -rw-r--r-- | data/nickserv.example.conf | 286 | ||||
| -rw-r--r-- | data/operserv.example.conf | 237 |
10 files changed, 592 insertions, 592 deletions
diff --git a/data/botserv.example.conf b/data/botserv.example.conf index b0cc513ae..8f67c4be2 100644 --- a/data/botserv.example.conf +++ b/data/botserv.example.conf @@ -56,17 +56,14 @@ service * * Provides essential functionality for BotServ. */ -module { name = "botserv" } - -/* - * Configuration for BotServ provided by bs_main. - */ -botserv +module { + name = "botserv" + /* * The name of the client that should be BotServ. */ - name = "BotServ" + client = "BotServ" /* * The default bot options for newly registered channels. Note that changing these options @@ -92,19 +89,6 @@ botserv minusers = 1 /* - * The maximum number of entries a single bad words list can have. Setting it too high can - * reduce performance slightly. - */ - badwordsmax = 32 - - /* - * The amount of time that data for a user is valid in BotServ. If the data exceeds this time, - * it is reset or deleted depending on the case. Do not set it too high, otherwise your - * resources will be slightly affected. - */ - keepdata = 10m - - /* * The bots are currently not affected by any modes or bans when they try to join a channel. * But some people may want to make it act like a real bot, that is, for example, remove all * the bans affecting the bot before joining the channel, remove a ban that affects the bot @@ -116,26 +100,18 @@ botserv #smartjoin = yes /* - * If set, the bots will use a kick reason that does not state the word when it is kicking. - * This is especially useful if you have young people on your network. - * - * This directive is optional. + * Defines the prefixes for fantasy commands in channels. One of these characters will have to be prepended + * to all fantasy commands. If you choose "!", for example, fantasy commands will be "!kick", + * "!op", etc. This directive is optional, if left out, the default fantasy character is "!". */ - gentlebadwordreason = yes + #fantasycharacter = "!." /* - * If set, BotServ will use case sensitive checking for badwords. + * Modes to set on service bots when they join channels, comment this out for no modes * * This directive is optional. */ - #casesensitive = yes - - /* - * Defines the prefixes for fantasy commands in channels. One of these characters will have to be prepended - * to all fantasy commands. If you choose "!", for example, fantasy commands will be "!kick", - * "!op", etc. This directive is optional, if left out, the default fantasy character is "!". - */ - #fantasycharacter = "!." + botmodes = "ao" } /* @@ -184,7 +160,22 @@ bs_autoassign * * Used for controlling the channel badword list. */ -module { name = "bs_badwords" } +module +{ + name = "bs_badwords" + + /* + * The maximum number of entries a single bad words list can have. + */ + badwordsmax = 32 + + /* + * If set, BotServ will use case sensitive checking for badwords. + * + * This directive is optional. + */ + #casesensitive = yes +} command { service = "BotServ"; name = "BADWORDS"; command = "botserv/badwords"; } /* @@ -246,7 +237,26 @@ command { service = "BotServ"; name = "INFO"; command = "botserv/info"; } * * Used for configuring what bots should kick for. */ -module { name = "bs_kick" } +module +{ + name = "bs_kick" + + /* + * The amount of time that data for a user is valid in BotServ. If the data exceeds this time, + * it is reset or deleted depending on the case. Do not set it too high, otherwise your + * resources will be slightly affected. + */ + keepdata = 10m + + /* + * If set, the bots will use a kick reason that does not state the word when it is kicking. + * This is especially useful if you have young people on your network. + * + * This directive is optional. + */ + gentlebadwordreason = yes +} + command { service = "BotServ"; name = "KICK"; command = "botserv/kick"; } command { service = "BotServ"; name = "KICK AMSG"; command = "botserv/kick/amsg"; } command { service = "BotServ"; name = "KICK BADWORDS"; command = "botserv/kick/badwords"; } @@ -285,7 +295,8 @@ command { service = "BotServ"; name = "SET PRIVATE"; command = "botserv/set/priv /* Fantasy commands * * Fantasy commands can be executed in channels that have a BotServ bot by prefixing the - * command with one of the fantasy characters configured in botserv:fantasycharacter. + * command with one of the fantasy characters configured in botserv's fantasycharacter + * directive. * * Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior. */ @@ -321,7 +332,6 @@ fantasy { name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chan fantasy { name = "UP"; command = "chanserv/up"; } fantasy { name = "VOP"; command = "chanserv/vop"; } - /* Use m_rewrite to rewrite the op, deop, etc. fantasy commands (see chanserv.conf). */ fantasy { name = "OWNER"; command = "rewrite"; } fantasy { name = "DEOWNER"; command = "rewrite"; } diff --git a/data/chanserv.example.conf b/data/chanserv.example.conf index 08954eaa6..6dc40991a 100644 --- a/data/chanserv.example.conf +++ b/data/chanserv.example.conf @@ -56,17 +56,14 @@ service * * Provides essential functionality for ChanServ. */ -module { name = "chanserv" } - -/* - * Configuration for ChanServ provided by cs_main. - */ -chanserv +module { + name = "chanserv" + /* * The name of the client that should be ChanServ. */ - name = "ChanServ" + client = "ChanServ" /* * The default options for newly registered channels. Note that changing these options @@ -95,7 +92,7 @@ chanserv * This directive is optional, if left blank, the options will default to keeptopic, secure, securefounder, * and signkick. If you really want no defaults, use "none" by itself as the option. */ - defaults="keeptopic peace secure securefounder signkick" + defaults = "keeptopic peace secure securefounder signkick" /* * The maximum number of channels which may be registered to a single nickname. @@ -114,23 +111,7 @@ chanserv expire = 14d /* - * The length of time before a suspended channel becomes unsuspended. - * - * This directive is optional. - * If not set, the default is never. - */ - #suspendexpire = 90d - - /* - * The lenth of time before a forbidden channel drops. - * - * This directive is optional. - * If not set, the default is never. - */ - #forbidexpire = 90d - - /* - * The default ban type for newly registered channels (and when importing old databases). + * The default ban type for newly registered channels. * * defbantype can be: * @@ -147,27 +128,12 @@ chanserv accessmax = 1024 /* - * The maximum number of entries on a channel's autokick list. - */ - autokickmax = 32 - - /* - * The default reason for an autokick if none is given. - */ - autokickreason = "User has been banned from the channel" - - /* * The length of time ChanServ stays in a channel after kicking a user from a channel they are not * permitted to be in. This only occurs when the user is the only one in the channel. */ inhabit = 15s /* - * The maximum number of channels to be returned for a ChanServ LIST command. - */ - listmax = 50 - - /* * Allow only IRC Operators to use ChanServ. * * This directive is optional. @@ -195,18 +161,6 @@ chanserv require = "r" /* - * Some IRCds can enforce mode locks server-side. This reduces the spam caused by - * services immediately reversing mode changes for locked modes. - */ - use_server_side_mlock = yes - - /* - * Some IRCds can enforce topic locks server-side. This reduces the spam caused by - * services immediately reversing topic changes. - */ - use_server_side_topiclock = yes - - /* * The maximum length of the reason field for user commands such as chanserv/kick * and chanserv/ban. */ @@ -902,7 +856,21 @@ command { service = "ChanServ"; name = "LEVELS"; command = "chanserv/levels"; gr * * Used for preventing users from joining channels. */ -module { name = "cs_akick" } +module +{ + name = "cs_akick" + + /* + * The maximum number of entries on a channel's autokick list. + */ + autokickmax = 32 + + /* + * The default reason for an autokick if none is given. + */ + autokickreason = "User has been banned from the channel" +} + command { service = "ChanServ"; name = "AKICK"; command = "chanserv/akick"; group = "chanserv/management"; } /* @@ -952,13 +920,14 @@ command { service = "ChanServ"; name = "ENFORCE"; command = "chanserv/enforce"; * * Used to configure entry messages sent to users when they join a channel. */ -module { name = "cs_entrymsg" } -command { service = "ChanServ"; name = "ENTRYMSG"; command = "chanserv/entrymsg"; group = "chanserv/management"; } -cs_entrymsg +module { + name = "cs_entrymsg" + /* The maximum number of entrymsgs allowed per channel. If not set, defaults to 5. */ maxentries = 5 } +command { service = "ChanServ"; name = "ENTRYMSG"; command = "chanserv/entrymsg"; group = "chanserv/management"; } /* * cs_flags @@ -1018,7 +987,16 @@ command { service = "ChanServ"; name = "KICK"; command = "chanserv/kick"; } * * Used for retrieving and searching the registered channel list. */ -module { name = "cs_list" } +module +{ + name = "cs_list" + + /* + * The maximum number of channels to be returned for a ChanServ LIST command. + */ + listmax = 50 +} + command { service = "ChanServ"; name = "LIST"; command = "chanserv/list"; permission = "chanserv/list"; group = "chanserv/admin"; } /* @@ -1143,7 +1121,18 @@ command { service = "ChanServ"; name = "STATUS"; command = "chanserv/status"; } * * Used for suspending and unsuspending channels. Suspended channels can not be used but their settings are stored. */ -module { name = "cs_suspend" } +module +{ + name = "cs_suspend" + + /* + * The length of time before a suspended channel expires. + * + * This directive is optional. + * If not set, the default is never. + */ + expire = 90d +} command { service = "ChanServ"; name = "SUSPEND"; command = "chanserv/suspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; } command { service = "ChanServ"; name = "UNSUSPEND"; command = "chanserv/unsuspend"; permission = "chanserv/suspend"; group = "chanserv/admin"; } diff --git a/data/chanstats.example.conf b/data/chanstats.example.conf index 0f131a85a..f686cd216 100644 --- a/data/chanstats.example.conf +++ b/data/chanstats.example.conf @@ -3,9 +3,10 @@ * Make sure BotServ, ChanServ and NickServ are running. */ -module { name = "m_chanstats" } -chanstats +module { + name = "m_chanstats" + /* * The name of this engine. * This must match with the name of an SQL engine block. diff --git a/data/example.conf b/data/example.conf index 55390e391..82be8c9b5 100644 --- a/data/example.conf +++ b/data/example.conf @@ -21,6 +21,15 @@ * foo = bar * } * + * Note that nameless blocks are allowed and are often used with comments to allow + * easially commenting an entire block, for example: + * #foobar + * { + * moo = "cow" + * foo = bar + * } + * is an entirely commented block. + * * Keys are case insensitive. Values depend on what key - generally, information is * given in the key comment. The quoting of values (and most other syntax) is quite * flexible, however, please do not forget to quote your strings: @@ -40,11 +49,6 @@ * * "86400", "86400s", "1440m", "24h", "1d" * - * CAUTION: - * Please note that your services might _CRASH_ if you add more format- - * strings (%s, %d, etc.) to custom messages than Anope needs. Use the - * default messages to see how many format-strings are needed. - * * In the documentation for each directive, one of the following will be * included to indicate whether an option is required: * @@ -106,19 +110,17 @@ define * the output from it will be included into your configuration. */ -/* -include +#include { type = "file" name = "some.conf" } -include +#include { type = "executable" name = "/usr/bin/wget -q -O - http://some.misconfigured.network.com/services.conf" } -*/ /* * [REQUIRED] IRCd Config @@ -234,7 +236,33 @@ serverinfo * - ratbox * - unreal */ -module { name = "inspircd12" } +module +{ + name = "inspircd20" + + /* + * Some protocol modules can enforce mode locks server-side. This reduces the spam caused by + * services immediately reversing mode changes for locked modes. + * + * If the protocol module you have loaded does not support this, this setting will have no effect. + */ + use_server_side_mlock = yes + + /* + * Some protocol modules can enforce topic locks server-side. This reduces the spam caused by + * services immediately reversing topic changes. + * + * If the protocol module you have loaded does not support this, this setting will have no effect. + */ + use_server_side_topiclock = yes + + /* + * Some IRCds allow "SASL" authentication to let users identify to Services + * during the IRCd user registration process. If set, Services will allow + * authenticating users through this mechanism. + */ + sasl = yes +} /* * [REQUIRED] Network Information @@ -279,6 +307,34 @@ networkinfo * Comment out or set to 0 to disable. */ modelistsize = 100 + + /* + * The characters allowed in hostnames. This is used for validating hostnames given + * to services, such as BotServ bot hostnames and user vhosts. Changing this is not + * recommended unless you know for sure your IRCd supports whatever characters you are + * wanting to use. Telling services to set a vHost containing characters your IRCd + * disallows could potentially break the IRCd and/or Services. + * + * It is recommended you DON'T change this. + */ + vhost_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-" + + /* + * If set to true, allows vHosts to not contain dots (.). + * Newer IRCds generally do not have a problem with this, but the same warning as + * vhost_chars applies. + * + * It is recommended you DON'T change this. + */ + allow_undotted_vhosts = false + + /* + * The characters that are not allowed to be at the very beginning or very ending + * of a vHost. The same warning as vhost_chars applies. + * + * It is recommended you DON'T change this. + */ + disallow_start_or_end = ".-" } /* @@ -328,19 +384,6 @@ options #seed = 9866235 /* - * Allows Services to continue file write operations (i.e. database saving) - * even if the original file cannot be backed up. Enabling this option may - * allow Services to continue operation under conditions where it might - * otherwise fail, such as a nearly-full disk. - * - * NOTE: Enabling this option can cause irrecoverable data loss under some - * conditions, so make CERTAIN you know what you're doing when you enable it! - * - * This directive is optional, and you are discouraged against enabling it. - */ - #nobackupokay = yes - - /* * If set, Services will perform more stringent checks on passwords. If this * isn't set, Services will only disallow a password if it is the same as the * entity (nickname name) with which it is associated. When set, however, @@ -406,41 +449,15 @@ options * will use doing this. Higher values will cause less accurate timing but * less CPU usage. * - * This shouldn't be set any higher than 10 seconds, and 1 second is best - * if your system is powerful enough (or your network small enough) to - * handle it. 0 will cause the timeout list to be checked every time - * through the main loop, which will probably slow down Services too much - * to be useful on most networks. - * * Note that this value is not an absolute limit on the period between * checks of the timeout list; the previous may be as great as readtimeout * (above) during periods of inactivity. * - * If this directive is not given, it will default to 0. See the 2nd paragraph - * above for performance impacts if you do this. + * If this directive is not given, it will default to 0. */ timeoutcheck = 3s /* - * Sets the number of days backups of databases are kept. If you don't give it, - * or if you set it to 0, Services won't backup the databases. - * - * NOTE: Services must run 24 hours a day for this feature to work. - * - * This directive is optional, but recommended. - */ - keepbackups = 3 - - /* - * If set, Services will require a reason when a FORBID is added, else the - * reason is optional. This directive also applies to SUSPENDed channels as - * well. - * - * This directive is optional. - */ - forceforbidreason = yes - - /* * If set, this will allow users to let Services send PRIVMSGs to them * instead of NOTICEs. Also see the defmsg option of nickserv:defaults, * which also toggles the default communication (PRIVMSG or NOTICE) to @@ -471,35 +488,6 @@ options #hidestatso = yes /* - * Prevents users from registering their nick if they are not connected - * for at least the given number of seconds. - * - * This directive is optional. - */ - #nickregdelay = 30 - - /* - * If set, forbids the registration of nicks that contain an existing - * nick with Services access. For example, if Tester is a Services Oper, - * you can't register NewTester or Tester123 unless you are an IRC - * Operator. - * - * NOTE: If you enable this, you will have to be logged in as an IRC - * operator in order to register a Services Root nick when setting up - * Anope for the first time. - * - * This directive is optional. - */ - #restrictopernicks = yes - - /* - * The number of LOGON/OPER news items to display when a user logs on. - * - * This directive is optional, if no set it will default to 3. - */ - #newscount = 3 - - /* * A space-separated list of ulined servers on your network, it is assumed that * the servers in this list are allowed to set channel modes and Services will * not attempt to reverse their mode changes. @@ -511,16 +499,9 @@ options #ulineservers = "stats.your.network" /* - * Modes to set on service bots when they join channels, comment this out for no modes - * - * This directive is optional. - */ - botmodes = "ao" - - /* - * How long to wait between connection retries, in seconds. + * How long to wait between connection retries with the uplink(s). */ - retrywait = 60 + retrywait = 60s /* * If set, Services will hide commands that users don't have the privileges to execute @@ -539,6 +520,39 @@ options * Note for this to work the regex module providing the regex engine must be loaded. */ regexengine = "regex/pcre" + + /* + * A list of languages to load on startup that will be available in /nickserv set language. + * Useful if you translate Anope to your language. (Explained further in docs/LANGUAGE). + * Note that english should not be listed here because it is the base language. + * + * Removing .UTF-8 will instead use the default encoding for the language, eg. iso-8859-1 for western European languages. + */ + languages = "ca_ES.UTF-8 de_DE.UTF-8 el_GR.UTF-8 es_ES.UTF-8 fr_FR.UTF-8 hu_HU.UTF-8 it_IT.UTF-8 nl_NL.UTF-8 pl_PL.UTF-8 pt_PT.UTF-8 ru_RU.UTF-8 tr_TR.UTF-8" + + /* + * Default language that non- and newly-registered nicks will receive messages in. + * Leave empty to default to English. + */ + #defaultlanguage = "es_ES.UTF-8" + + /* + * The username, and possibly hostname, used for fake users created when Services needs to + * hold a nickname. + */ + enforceruser = "enforcer" + enforcerhost = "localhost.net" + + /* + * The length of time Services hold nicknames. + */ + releasetimeout = 1m + + /* + * When a user's nick is forcibly changed to enforce a "nick kill", their new nick will start + * with this value. The rest will be made up of 6 or 7 digits. + */ + guestnickprefix = "Guest" } /* @@ -865,7 +879,7 @@ opertype * As with all permissions, make sure to only give trustworthy people access to Services. */ -oper +#oper { /* The nickname of this services oper */ #name = "nick1" @@ -893,19 +907,17 @@ oper #vhost = "oper.mynet" } -/* -oper +#oper { name = "nick2" type = "Services Administrator" } -oper +#oper { name = "nick3" type = "Helper" } -*/ /* * [OPTIONAL] Mail Config @@ -1048,9 +1060,10 @@ mail * You should only use this to upgrade old databases to a newer database format by loading * other database modules in addition to this one, which will be used when saving databases. */ -#module { name = "db_old" } -db_old +#module { + name = "db_old" + /* * This is the encryption type used by the databases. This must be set correctly or * your passwords will not work. Valid options are: md5, oldmd5, sha1, and plain. @@ -1067,28 +1080,45 @@ db_old * Then unload this and restart Anope, loading from the new database. */ #module { name = "db_plain" } -db_plain -{ - /* - * The database name db_plain should use - */ - database = "anope.db" -} /* * db_flatfile * * This is the default flatfile database format. */ -module { name = "db_flatfile" } -db_flatfile +module { + name = "db_flatfile" + /* * The database name db_flatfile should use */ database = "anope.db" /* + * Sets the number of days backups of databases are kept. If you don't give it, + * or if you set it to 0, Services won't backup the databases. + * + * NOTE: Services must run 24 hours a day for this feature to work. + * + * This directive is optional, but recommended. + */ + keepbackups = 3 + + /* + * Allows Services to continue file write operations (i.e. database saving) + * even if the original file cannot be backed up. Enabling this option may + * allow Services to continue operation under conditions where it might + * otherwise fail, such as a nearly-full disk. + * + * NOTE: Enabling this option can cause irrecoverable data loss under some + * conditions, so make CERTAIN you know what you're doing when you enable it! + * + * This directive is optional, and you are discouraged against enabling it. + */ + #nobackupokay = yes + + /* * If enabled, services will fork a child process to save databases. * * This is only useful with very large databases, with hundreds @@ -1099,29 +1129,24 @@ db_flatfile } /* - * db_sql + * db_sql and db_sql_live * - * This module allows saving and loading databases using one of the SQL engines. + * db_sql module allows saving and loading databases using one of the SQL engines. * This module loads the databases once on startup, then incrementally updates * objects in the database as they are changed within Anope in real time. Changes * to the SQL tables not done by Anope will have no effect and will be overwritten. * - */ -#module { name = "db_sql" } - -/* - * db_sql_live - * - * This module allows saving and loading databases using one of the SQL engines. + * db_sql_live module allows saving and loading databases using one of the SQL engines. * This module reads and writes to SQL in real time. Changes to the SQL tables * will be immediately reflected into Anope. This module should not be loaded * in conjunction with db_sql. + * */ -#module { name = "db_sql_live" } - -/* Configuration block for both db_sql and db_sql_live */ -db_sql +#module { + name = "db_sql" + #name = "db_sql_live + /* * The SQL service db_sql(_live) should use, these are configured in modules.conf. * For MySQL, this should probably be mysql/main. @@ -1210,7 +1235,7 @@ include * Requires a MySQL Database. */ #include -#{ -# type = "file" -# name = "chanstats.example.conf" -#} +{ + type = "file" + name = "chanstats.example.conf" +} diff --git a/data/global.example.conf b/data/global.example.conf index 2ae7cdc99..b013537d6 100644 --- a/data/global.example.conf +++ b/data/global.example.conf @@ -56,38 +56,30 @@ service * * Provides essential functionality for Global. */ -module { name = "global" } - -/* - * Configuration for Global provided by gl_main. - */ -global +module { + name = "global" + /* * The name of the client that should be Global. */ - name = "Global" + client = "Global" /* - * If set, Services will send global messages on starting up and shutting - * down/restarting. + * This is the global message that will be sent when Services are being + * shutdown/restarted. * * This directive is optional. */ - #globaloncycle = yes - - /* - * This is the global message that will be sent when Services are being - * shutdown/restarted. This directive is only required if you enable - * globaloncycle above. - */ - globaloncycledown = "Services are restarting, they will be back shortly - please be good while we're gone" + #globaloncycledown = "Services are restarting, they will be back shortly - please be good while we're gone" /* * This is the global message that will be sent when Services (re)join the - * network. This directive is only required if you enable globaloncycle above. + * network. + * + * This directive is optional. */ - globaloncycleup = "Services are now back online - have a nice day" + #globaloncycleup = "Services are now back online - have a nice day" /* * If set, Services will hide the IRC Operator's nick in a global diff --git a/data/hostserv.example.conf b/data/hostserv.example.conf index 1d406ef5b..10063ae7d 100644 --- a/data/hostserv.example.conf +++ b/data/hostserv.example.conf @@ -56,45 +56,14 @@ service * * Provides essential functionality for HostServ. */ -module { name = "hostserv" } - -/* - * Configuration for HostServ provided by hs_main. - */ -hostserv +module { - /* - * The name of the client that should be HostServ. - */ - name = "HostServ" + name = "hostserv" /* - * The characters allowed in a vHost. Changing this is not recommended unless - * you know for sure your IRCd supports whatever characters you are wanting to use. - * Telling services to set a vHost containing characters your IRCd disallows could - * potentially break the IRCd and/or Services. Note these are 1 byte characters, so - * UTF-8 characters will not work. - * - * It is recommended you DON'T change this. - */ - vhost_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-" - - /* - * If set to true, allows vHosts to not contain dots (.). - * Newer IRCds generally do not have a problem with this, but the same warning as - * vhost_chars applies. - * - * It is recommended you DON'T change this. - */ - allow_undotted_vhosts = false - - /* - * The characters that are not allowed to be at the very beginning or very ending - * of a vHost. The same warning as vhost_chars applies. - * - * It is recommended you DON'T change this. + * The name of the client that should be HostServ. */ - disallow_start_or_end = ".-" + client = "HostServ" } /* @@ -169,13 +138,10 @@ command { service = "HostServ"; name = "ON"; command = "hostserv/on"; } * * Used to manage vHosts requested by users. */ -module { name = "hs_request" } -command { service = "HostServ"; name = "REQUEST"; command = "hostserv/request"; } -command { service = "HostServ"; name = "ACTIVATE"; command = "hostserv/activate"; permission = "hostserv/set"; } -command { service = "HostServ"; name = "REJECT"; command = "hostserv/reject"; permission = "hostserv/set"; } -command { service = "HostServ"; name = "WAITING"; command = "hostserv/waiting"; permission = "hostserv/set"; } -hs_request +module { + name = "hs_request" + /* * If set, Services will send a memo to the user requesting a vHost when it's been * approved or rejected. @@ -187,6 +153,10 @@ hs_request */ #memooper = yes } +command { service = "HostServ"; name = "REQUEST"; command = "hostserv/request"; } +command { service = "HostServ"; name = "ACTIVATE"; command = "hostserv/activate"; permission = "hostserv/set"; } +command { service = "HostServ"; name = "REJECT"; command = "hostserv/reject"; permission = "hostserv/set"; } +command { service = "HostServ"; name = "WAITING"; command = "hostserv/waiting"; permission = "hostserv/set"; } /* * hs_set diff --git a/data/memoserv.example.conf b/data/memoserv.example.conf index 40678bf53..6e4fd1e8d 100644 --- a/data/memoserv.example.conf +++ b/data/memoserv.example.conf @@ -56,18 +56,14 @@ service * * Provides essential functionality for MemoServ. */ -module { name = "memoserv" } - -/* - * Configuration for MemoServ provided by ms_main. - */ -memoserv +module { + name = "memoserv" /* * The name of the client that should be MemoServ. Clients are configured * with the service blocks. */ - name = "MemoServ" + client = "MemoServ" /* * The maximum number of memos a user is allowed to keep by default. Normal users may set the @@ -88,16 +84,6 @@ memoserv * This directive is optional, but recommended. */ senddelay = 3s - - /* - * Allow the use of memo receipts for the following groups: - * - * 1 - Opers Only - * 2 - Everybody - * - * This directive is optional. - */ - #memoreceipt = 1 } /* @@ -193,7 +179,17 @@ command { service = "MemoServ"; name = "READ"; command = "memoserv/read"; } * * Requires configuring memoserv:memoreceipt. */ -#module { name = "ms_rsend" } +#module +{ + name = "ms_rsend" + + /* + * Only allow Services Operators to use ms_rsend. + * + * This directive is optional. + */ + operonly = false +} #command { service = "MemoServ"; name = "RSEND"; command = "memoserv/rsend"; } /* diff --git a/data/modules.example.conf b/data/modules.example.conf index ef862221f..f1a5b8d7f 100644 --- a/data/modules.example.conf +++ b/data/modules.example.conf @@ -21,9 +21,10 @@ module { name = "help" } * Adds support for the DNS protocol. By itself this module does nothing useful, * but other modules such as m_dnsbl and os_dns require this. */ -#module { name = "m_dns" } -dns +#module { + name = "m_dns" + /* * The nameserver to use for resolving hostnames, must be an IP or a resolver configuration file. * The below should work fine on all unix like systems. Windows users will have to find their nameservers @@ -74,9 +75,10 @@ dns * is found on the blacklist they will be immediately banned. This is a crucial module * to prevent bot attacks. */ -#module { name = "m_dnsbl" } -m_dnsbl +#module { + name = "m_dnsbl" + /* * If set, Services will check clients against the DNSBLs when services connect to its uplink. * This is not recommended, and on large networks will open a very large amount of DNS queries. @@ -136,9 +138,10 @@ blacklist * * Gives users who are op in the specified help channel usermode +h (helpop). */ -#module { name = "m_helpchan" } -m_helpchan +#module { + name = "m_helpchan" + helpchannel = "#help" } @@ -324,9 +327,10 @@ mysql * back to services. If services are able to connect through the proxy to itself * then it knows it is an insecure proxy, and will ban it. */ -#module { name = "m_proxyscan" } -m_proxyscan +#module { + name = "m_proxyscan" + /* * The target IP services tells the proxy to connect back to. This must be a publicly * avaiable IP that remote proxies can connect to. @@ -402,9 +406,10 @@ proxyscan * This module allows authenticating users against an external SQL database using a custom * query. */ -#module { name = "m_sql_authentication" } -m_sql_authentication +#module { + name = "m_sql_authentication" + /* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */ engine = "mysql/main" @@ -446,9 +451,10 @@ m_sql_authentication * This module allows granting users services operator privileges and possibly IRC Operator * privileges based on an external SQL database using a custom query. */ -#module { name = "m_sql_oper" } -m_sql_oper +module { + name = "m_sql_oper" + /* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */ engine = "mysql/main" @@ -509,37 +515,38 @@ module { name = "m_regex_pcre" } */ module { name = "m_rewrite" } #command |