diff options
Diffstat (limited to 'data')
| -rw-r--r-- | data/example.conf | 3035 | ||||
| -rw-r--r-- | data/example_new.conf | 1517 |
2 files changed, 1517 insertions, 3035 deletions
diff --git a/data/example.conf b/data/example.conf index b791a9793..d66a1efe6 100644 --- a/data/example.conf +++ b/data/example.conf @@ -1,1518 +1,1517 @@ -# Example configuration file for Services. After making the appropriate -# changes to this file, place it in the Services data directory (as -# specified in the "configure" script, default /home/username/services) -# under the name "services.conf". -# -# The format of this file is fairly simple: a line beginning with a # is a -# comment, and any other non-blank line is expected to be a directive and -# parameters, separated by spaces or tabs. For example: -# -# Directive Parameter-1 Parameter-2 ... -# -# Directives are case-insensitive. Note that some directives do not take -# any parameters; these are typically "on-off" directives, for which simply -# including the directive in this file (or removing it) has an effect on -# Services' functionality. -# -# If a parameter's value is a string which includes spaces, enclose the -# string in double quotation marks, like the example below. Quotes may be -# used around any string at all for clarity. -# -# "This is a parameter string with spaces in it" -# -# If you need to include a double quote inside a quoted string, precede it -# by a backslash: -# -# "This string has \"double quotes\" in it" -# -# Time parameters can be specified either as an integer representing a -# number of seconds (e.g. "3600" = 1 hour), or as an integer with a unit -# specifier: "s" = seconds, "m" = minutes, "h" = hours, "d" = days. -# Combinations (such as "1h30m") are not permitted. Examples (all of which -# represent the same length of time, one day): -# -# "86400", "86400s", "1440m", "24h", "1d" -# -# CAUTION: -# Please note that your services might _CRASH_ if you add more format- -# strings (%s, %d, etc.) to custom messages than Anope needs. Use the -# default messages to see how many format-strings are needed. -# -# In the documentation for each directive, one of the following will be -# included to indicate whether an option is required: -# -# [REQUIRED] -# Indicates a directive which must be given. Without it, Services will -# not start. -# -# [RECOMMENDED] -# Indicates a directive which may be omitted, but omitting it may cause -# undesirable side effects. -# -# [OPTIONAL] -# Indicates a directive which is optional. If not given, the feature -# will typically be disabled. If this is not the case, more -# information will be given in the documentation. -# -# [DISCOURAGED] -# Indicates a directive which may cause undesirable side effects if -# specified. -# -# [DEPRECATED] -# Indicates a directive which will disappear in a future version of -# Services, usually because its functionality has been either -# superseded by that of other directives or incorporated into the main -# program. - -########################################################################### -# -# IRCD configuration -# -########################################################################### - -# IRCDModule <module_name> [REQUIRED] -# The ircd protocol module should be used when connecting anope to your -# chosen IRCD. This should be one of the following options, or a file -# provided by your IRCD author. -# -# Bahamut 1.4.27 [or later] - "bahamut" -# Charybdis 1.0 [or later] - "charybdis" -# DreamForge 4.6.7 - "dreamforge" -# Hybrid IRCd 7.0 [experimental] - "hybrid" -# InspIRCd 1.0 [beta 5 or later] - "inspircd10" -# InspIRCd 1.1 [beta 8 or later] - "inspircd11" -# Plexus 3.0 [or later] - "plexus3" -# Plexus 2.0 [or later] - "plexus2" -# PTLink 6.15.0 [experimental] - "ptlink" -# RageIRCd 2.0.x - "rageircd" -# Ratbox 2.0.6 [or later] - "ratbox" -# ShadowIRCD 4.0x [beta 7 or later] - "shadowircd" -# Solid IRCD 3.4.x [3.4.6 or later] - "solidircd" -# UltimateIRCd 3.0.0 [or later] - "ultimate3" -# UltimateIRCd 2.8.2 [or later] - "ultimate2" -# Unreal 3.2 [beta-19 or later] - "unreal32" -# Unreal 3.1.1 [or later] - "unreal31" -# ViagraIRCd 1.3.x [or later] - "viagra" -# - -#IRCDModule "unreal32" - -########################################################################### -# -# Encryption settings -# -########################################################################### - -# EncModule <module_name> [REQUIRED] -# The encryption module to use when dealing with passwords. -# This determines how the passwords are stored in the databases, -# and does not add any security as far as transmitting passwords over -# the network goes. -# enc_none provides no password encryption, storing the password in -# plain text, this is the most versiatle as passwords can easily be -# recovered. -# -# NOTE: users of anope's previous (broken) md5 implementation should -# select the enc_old option, or things may break. -# -# NOTE2: Some of these encryption methods are one-way (md5, sha1, old) -# meaning that you can NOT retrieve the passwords in plain text once -# encrypted. -# -# Plain Text - enc_none -# Previous (broken) MD5 - enc_old -# MD5 - enc_md5 -# SHA1 - enc_sha1 -# - -EncModule "enc_none" - -########################################################################### -# -# Core module configuration -# -########################################################################### -# HostCoreModules <list> [RECOMMENDED] -# These modules will be loaded as part of HostServ's core. -# It is not recommended you change these settings unless you are -# sure you understand exactly what it is you are doing. -HostCoreModules "hs_help hs_on hs_off hs_group hs_list hs_set hs_setall hs_del hs_delall" - -# MemoCoreModules <list> [RECOMMENDED] -# These modules will be loaded as part of MemoServ's core. -# It is not recommended you change these settings unless you are -# sure you understand exactly what it is you are doing. -MemoCoreModules "ms_send ms_cancel ms_list ms_read ms_del ms_set ms_info ms_rsend ms_check ms_staff ms_sendall ms_help" - -# HelpCoreModules <list> [RECOMMENDED] -# These modules will be loaded as part of HelpServ's core. -# It is not recommended you change these settings unless you are -# sure you understand exactly what it is you are doing. -HelpCoreModules "he_help" - -# BotCoreModules <list> [RECOMMENDED] -# These modules will be loaded as part of BotServ's core. -# It is not recommended you change these settings unless you are -# sure you understand exactly what it is you are doing. -BotCoreModules "bs_help bs_botlist bs_assign bs_set bs_kick bs_badwords bs_act bs_info bs_say bs_unassign bs_bot bs_fantasy bs_fantasy_kick bs_fantasy_kickban bs_fantasy_owner bs_fantasy_seen" - -# OperCoreModules <list> [RECOMMENDED] -# These modules will be loaded as part of OperServ's core. -# It is not recommended you change these settings unless you are -# sure you understand exactly what it is you are doing. -OperCoreModules "os_help os_global os_stats os_oper os_admin os_staff os_mode os_kick os_clearmodes os_akill os_sgline os_sqline os_szline os_chanlist os_userlist os_logonnews os_randomnews os_opernews os_session os_noop os_jupe os_ignore os_set os_reload os_update os_restart os_quit os_shutdown os_defcon os_chankill os_svsnick os_oline os_umode os_modload os_modunload os_modlist os_modinfo" - -# NickCoreModules <list> [RECOMMENDED] -# These modules will be loaded as part of NickServ's core. -# It is not recommended you change these settings unless you are -# sure you understand exactly what it is you are doing. -NickCoreModules "ns_help ns_register ns_group ns_identify ns_access ns_set ns_saset ns_drop ns_recover ns_release ns_sendpass ns_ghost ns_alist ns_info ns_list ns_logout ns_status ns_update ns_getpass ns_getemail ns_forbid ns_suspend" - -# ChanCoreModules <list> [RECOMMENDED] -# These modules will be loaded as part of ChanServ's core. -# It is not recommended you change these settings unless you are -# sure you understand exactly what it is you are doing. -ChanCoreModules "cs_help cs_register cs_identify cs_set cs_xop cs_access cs_akick cs_drop cs_sendpass cs_ban cs_clear cs_modes cs_getkey cs_invite cs_kick cs_list cs_logout cs_topic cs_info cs_getpass cs_forbid cs_suspend cs_status" -########################################################################### -# -# Remote server configuration -# -########################################################################### - -# RemoteServer <hostname> <port> <password> [REQUIRED] -# Specifies the remote server hostname and port. The hostname may -# either be a standard Internet hostname or dotted-quad numeric -# address; the port number must be an integer between 1 and 65535 -# inclusive. The password is a string which should be enclosed in -# double quotes if it contains any spaces (or just for clarity). -# -# The remote server and port may be overridden at runtime with the -# -remote command-line option. The password may not be set at runtime. -# -# If services can't connect to the RemoteServer, they will try -# RemoteServer2 (if defined). If they can't connect to RemoteServer2, -# they will use RemoteServer3 (if defined). - -RemoteServer localhost 6667 "mypass" -#RemoteServer2 localhost 6667 "mypass" -#RemoteServer3 localhost 6667 "mypass" - -# LocalAddress <hostname> [port] [OPTIONAL] -# Specifies the local address to bind to before connecting to the -# remote server. This may be useful on multihomed hosts. The hostname -# and port number are specified the same way as with the RemoteServer -# directive. If this is not specified, Services will let the operating -# system choose the local address. If only a hostname is specified, -# Services will bind to that address but let the operating system -# choose the local port number. -# -# If you don't know what this means or don't need to use it, just leave -# the directive commented out. -# -# This directive may be overridden at runtime by the -local -# command-line option. - -#LocalAddress nowhere. 0 - -########################################################################### -# -# Services identification and pseudoclient names -# -########################################################################### - -# ServerName <name> [REQUIRED] -# Specifies the IRC server name which Services should use. May be -# overridden by the -name command-line option. - -ServerName "services.localhost.net" - -# ServerDesc <text> [REQUIRED] -# Specifies the text which should appear as the server's information in -# /whois and similar queries. May be overridden by the -desc -# command-line option. - -ServerDesc "Services for IRC Networks" - -# ServiceUser <usermask> [REQUIRED] -# Specifies the user@host mask which should be used by the Services -# pseudoclients. May be overridden by the -user and -host command-line -# options. - -ServiceUser "services@localhost.net" - -# ...Name <nick> <string> [REQUIRED except as noted below] -# Specify the nicknames (first parameter) and "real" names (second -# parameter) for the Services pseudoclients. BotServ and DevNull may -# be disabled by commenting out the appropriate lines below. Disabling -# BotServ is recommended on large networks. - -NickServName "NickServ" "Nickname Server" -ChanServName "ChanServ" "Channel Server" -MemoServName "MemoServ" "Memo Server" -BotServName "BotServ" "Bot Server" -HelpServName "HelpServ" "Help Server" -OperServName "OperServ" "Operator Server" -GlobalName "Global" "Global Noticer" -#DevNullName "DevNull" "/dev/null -- message sink" -HostServName "HostServ" "vHost Server" - -# ...Alias <nick> <string> [OPTIONAL] -# Specify alternate nicknames for services. When a user will /msg -# NickServAlias something, it will be forwarded to NickServName, and -# NickServName will answer. This can be used to ease the migration -# from another network, for example if your services are called -# NickKeeper, ChanKeeper, etc ... and the other network calls them -# NickServ, ChanServ, etc ... - -#NickServAlias "NickServ2" "Nickname Server Forwarder" -#ChanServAlias "ChanServ2" "Channel Server Forwarder" -#MemoServAlias "MemoServ2" "Memo Server Forwarder" -#BotServAlias "BotServ2" "Bot Server Forwarder" -#HelpServAlias "HelpServ2" "Help Server Forwarder" -#OperServAlias "OperServ2" "Operator Server Forwarder" -#GlobalAlias "Global2" "Global Noticer Forwarder" -#DevNullAlias "DevNull2" "/dev/null -- message sink Forwarder" -#HostServAlias "HostServ2" "vHost Server Forwarder" - -########################################################################### -# -# Services data filenames -# -########################################################################### - -# NOTE: All filenames are relative to the Services data directory. - -# PIDFile <filename> [REQUIRED] -# Specifies the name of the file containing Services' process ID. - -PIDFile services.pid - -# MOTDFile <filename> [REQUIRED] -# Specifies the name of the Message of the Day file. - -MOTDFile services.motd - -# ...DB <filename> [REQUIRED] -# Specifies the filenames for the various Services subsystems' databases. - -NickServDB nick.db -#PreNickServDB prenick.db -ChanServDB chan.db -BotServDB bot.db -OperServDB oper.db -NewsDB news.db -ExceptionDB exception.db -HostServDB hosts.db - -# There is no more databases for AKILLs. This setting is kept to allow -# you to import old AKILL database, and is optional. (If not given, -# Services will look for a file named akill.db.) - -# AutokillDB akill.db - -########################################################################### -# -# Network information -# -########################################################################### - -# HelpChannel <channel> [OPTIONAL] -# -# When defined, every users that has or gets op status on this channel -# automatically receive the +h user mode. - -HelpChannel "#help" - -# LogChannel <channel> [OPTIONAL] -# -# When defined, services will output log messages to this channel. -# IMPORTANT: This can be a security risk so make certain this channel -# is sufficiently protected from normal access. - -#LogChannel "#services" - -# LogBot [OPTIONAL] -# -# When defined, services will output all BotServ chatter to the defined -# LogChan above. It shows all uses of BotServ ACT and SAY commands. Note -# that there is no logging to the log file. Only works if LogChannel is -# also defined. - -#LogBot - -# NetworkName <name> [REQUIRED] -# -# This is the name of the network the Services are running on. - -NetworkName "LocalNet" - -# Numeric [OPTIONAL] -# Many ircd identify themselves with a Numeric ID when using this option -# consult your ircds documentation before using this -#Numeric "64" - -# NickLen [RECOMMENDED] -# Set this to the maximum allowed nick length on your network. Anope does -# not support values larger than 31, so setting them makes no sense. Be -# sure to set this correctly, as setting this wrong can result in services -# being disconnected from the network. - -NickLen 31 - -########################################################################### -# -# Basic functionality -# -########################################################################### - -# UserKey1|2|3 <value> [RECOMMENDED] -# -# These keys are required to initiate the random number generator. These -# numbers MUST be random as you want your passcodes to be random. Don't -# give these keys to anyone! Keep them private! -# -# *** NOTE *** -# If you don't enable these, or keep their default values, any talented -# programmer would be able to easily "guess" random strings used to mask -# information. Be safe, and come up with three different 7 digit numbers - -#UserKey1 9866235 -#UserKey2 8362013 -#UserKey3 2362899 - -# NoBackupOkay [DISCOURAGED] -# Allows Services to continue file write operations (i.e. database -# saving) even if the original file cannot be backed up. Enabling this -# option may allow Services to continue operation under some conditions -# when it might otherwise fail, such as a nearly-full disk. -# -# *** NOTE *** -# Enabling this option can cause irrecoverable data loss under some -# conditions, so make CERTAIN you know what you're doing when you -# enable it! - -#NoBackupOkay - -# StrictPasswords [RECOMMENDED] -# When enabled, causes Services to perform more stringent checks on -# passwords. If this is disabled, Services will only disallow a -# password if it is the same as the entity (nickname or channel name) -# with which it is associated. When enabled, however, Services will -# also check that the password is at least five characters long, and -# in the future will probably check other things as well. - -StrictPasswords - -# BadPassLimit <count> [RECOMMENDED] -# Sets the number of invalid password tries before Services removes a -# user from the network. If a user enters <count> invalid passwords -# for any Services function or combination of functions during a -# single IRC session (subject to BadPassTimeout, below), Services will -# issue a /KILL for the user. If not given, Services will ignore -# failed password attempts (though they will be logged in any case). - -BadPassLimit 5 - -# BadPassTimeout <time> [OPTIONAL] -# Sets the time after which invalid passwords are forgotten about. If -# a user does not enter any incorrect passwords in this amount of time, -# the incorrect password count will reset to zero. If not given, the -# timeout will be disabled, and the incorrect password count will never -# be reset until the user disconnects. - -BadPassTimeout 1h - -# UpdateTimeout <time> [REQUIRED] -# Sets the delay between automatic database updates. This timer is -# reset by the OperServ UPDATE command. - -UpdateTimeout 5m - -# ExpireTimeout <time> [REQUIRED] -# Sets the delay between checks for expired nicknames and channels. -# The OperServ UPDATE command will also cause a check for expiration -# and reset this timer. - -ExpireTimeout 30m - -# ReadTimeout <time> [REQUIRED] -# Sets the timeout period for reading from the network. - -ReadTimeout 5s - -# WarningTimeout <time> [REQUIRED] -# Sets the interval between sending warning messages for program -# errors via WALLOPS/GLOBOPS. - -WarningTimeout 4h - -# TimeoutCheck <time> [REQUIRED] -# Sets the (maximum) frequency at which the timeout list is checked. -# This, combined with ReadTimeout above, determine how accurately timed -# events, such as nick kills, occur; it also determines how much CPU -# time Services will use doing this. Higher values will cause less -# accurate timing but less CPU usage. -# -# This shouldn't be set any higher than 10 seconds, and 1 second is -# best if your system is powerful enough (or your network small enough) -# to handle it. 0 will cause the timeout list to be checked every time -# through the main loop, which will probably slow down Services too -# much to be useful on most networks. -# -# Note that this value is not an absolute limit on the period between -# checks of the timeout list; the period may be as great as ReadTimeout -# (above) during periods of inactivity. - -TimeoutCheck 3s - -# KeepLogs <days> [RECOMMENDED] -# -# Sets the number of days log files are kept. If you don't give it, or if -# you set it to 0, logs will be kept indefinitely. -# -# NOTE: Services must run 24 hours a day for this feature to work. - -KeepLogs 7 - -# KeepBackups <days> [RECOMMENDED] -# -# Sets the number of days backups of databases are kept. If you don't give -# it, or if you set it to 0, Services won't backup the databases. -# -# NOTE: Services must run 24 hours a day for this feature to work. - -KeepBackups 3 - -# ForceForbidReason [OPTIONAL] -# -# If set, Services will require a reason when a forbid is added, else -# the reason is optional. This directive also applies to SUSPENDed -# channels as well. - -ForceForbidReason - -# UsePrivmsg [OPTIONAL] -# -# This directive allows users to let Services send PRIVMSGs to them -# instead of NOTICEs. Also see NSDefMsg, which also toggles the default -# communication (PRIVMSG or NOTICE) to use for unregistered users. -# -# This is a feature that is against the IRC RFC and should be used -# _only_ if absolutely necessary. - -#UsePrivmsg - -# UseStrictPrivMsg [OPTIONAL] -# Using this directive will force services to only respond to privmsgs -# addressed to Nick@ServerName - e.g. NickServ@localhost.net. -# This should be used on conjunction with ircd aliases. -# -# When using Bahamut, this option will NOT work if the uplink server is -# configured as a services hub. The serviceshub option is not designed to -# be used with Anope. - -#UseStrictPrivMsg - -# DumpCore [OPTIONAL] -# -# Setting this directive will make Anope dump core when a segmentation -# fault occurs. This is generally not needed, but if Anope is crashing -# on your network and you want to make a bug report, having a core -# file may be of great help. - -#DumpCore - -# LogUsers [OPTIONAL] -# -# Defines whether Anope will log user connections, disconnections and -# nickname changes. You may have to do so in case you ever need to -# transmit user information to your local authorities. - -#LogUsers - -# HideStatsO [OPTIONAL] -# -# Setting this directive will make Services only show Stats o to -# IRC Operators. - -#HideStatsO - -# GlobalOnCycle [OPTIONAL] -# -# Setting this directive will make Services send global messages on -# starting up and shutting down/restarting. - -#GlobalOnCycle - -# GlobalOnCycleMessage <text> [REQUIRED if GlobalOnCycle is specified] -# This is the global message sent when the Services are -# being shutdown/restarted if using GlobalOnCycle -GlobalOnCycleMessage "Services are restarting, they will be back shortly - please be good while we're gone" - -# GlobalOnCycleUP <text> [OPTIONAL] -# If defined this message will be sent global when the services join -# the network. -GlobalOnCycleUP "Services are now back online - have a nice day" - -# AnonymousGlobal [OPTIONAL] -# hides the oper's nick in a global message/notice -#AnonymousGlobal - -# NickRegDelay <seconds> [OPTIONAL] -# Prevents users from regging their nick if they are not -# connected for at least X seconds. -#NickRegDelay 30 - -# UseSVSHOLD [OPTIONAL] -# Allows networks running Bahamut (1.4.35 or later), Unreal (3.2), -# and Plexus (3.0) to use SVSHOLD instead of the services enforcer. -# This option places a temporary Q:Line on the held nick instead -# of introducing a new pseudoclient with that nick, which is better -# for both CPU and bandwidth. If you enable this option on an -# incompatible IRCd (like a pre-1.4.35 Bahamut), it is most likely -# to break. -#UseSVSHOLD - -# RestrictOperNick [OPTIONAL] -# Forbids the registration of nicks that contain nick with services -# access. So if Tester is a Services Oper, for example, You can't -# register NewTester or Tester123 unless you are an IRC operator. -# IMPORTANT: Remember that you have to be an ircop if you want to -# register the root's nick when setting up Anope for the -# the first time. -#RestrictOperNicks - -# NewsCount [OPTIONAL] -# The number of LOGON/OPER News item to display when a user logs -# on. The default value is 3 -#NewsCount 3 - -# UnRestrictSAdmin [OPTIONAL] -# On many ircd Anope removes the umode of +a from users whom are not -# Service Admin in Anope. This mode is NOT used by Anope for any form -# of access. Thus this option allows them to keep the mode without having -# to be a Service Admin in Anope -#UnRestrictSAdmin - -# UlineServers [OPTIONAL] -# -# A list of ulined servers on your network, these servers are assumed they -# can set channel modes and we will not attempt to take them from them -# WARNING: do not put your user servers in this option - -UlineServers "stats.your.network proxy.your.network" - -# UseTS6 [OPTIONAL] -# -# Modern hybrid ircd like Ratbox 2.0.x support a protocol called TS6. -# However this protocol is optional thus our default support is for without -# TS6, if you want to take advantage of TS6, enable this option. - -#UseTS6 - -########################################################################### -# -# Mail-related options -# -########################################################################### - -# NOTE: if UseMail is not set, all parameters after it in this section -# are optional. - -# UseMail [OPTIONAL] -# -# This option enables the mail commands in Services. You may choose -# to disable it if you have no sendmail-compatible mailer installed. -# This setting is [REQUIRED] if NSEmailReg is enabled. - -UseMail - -# SendMailPath <path> [REQUIRED] -# -# This is how we should call SendMail to send a mail. It must be -# called with all parameters needed to make it scan the mail input -# to find the mail recipient; consult your SendMail documentation. -# -# Postfix users must use the compatible sendmail utility provided -# with it; this one usually needs no parameters on the command line. -# Most sendmail applications (or replacements of it) require the -t -# option to be used. - -SendMailPath "/usr/sbin/sendmail -t" - -# SendFrom <e-mail> [REQUIRED] -# -# This is the e-mail from which all the e-mails are to be sent. It should -# really exist. - -SendFrom services@localhost.net - -# RestrictMail [OPTIONAL] -# -# When enabled, SENDPASS will be restricted to IRC operators. -# -# WARNING: if you choose to not enable this option, you should limit -# the number of processes the services user can have at a time (you can -# create a special user for this; remember to never launch Services as root). - -RestrictMail - -# MailDelay <time> [RECOMMENDED] -# -# This controls the minimum amount of time an user must wait before sending -# another mail after it has sent one. It also controls the minimum time -# an user must wait before it can receive another mail. -# -# This feature prevents users from being mail bombed using Services and -# should definitely be used. - -MailDelay 5m - -# DontQuoteAddresses [OPTIONAL] -# -# When enabled, services will not attempt to "" the TO: fields in mails -# -# So far we only know of ESMTP/QMail which need this set. -# - -#DontQuoteAddresses - -########################################################################### -# -# NickServ configuration -# -########################################################################### - -# NSForceEmail [RECOMMENDED] -# This option forces the users to give an e-mail when they register -# a nickname. If you have nicks in the database that have no e-mail -# set, they will be asked to set an e-mail when they identify their -# nickname until they set one. Also, this option prevents user from -# unsetting the password. This setting is [REQUIRED] if NSEmailReg -# is enabled. -# -# This option is useful to resolve "lost password" problems. - -NSForceEmail - -# NSEmailReg [OPTIONAL] -# This option splits the nick registration into 2 steps, the first -# after registering a email with a passcode is sent to the supplied -# email address, this passcode needs to be entered with a confirm -# command before the nick registration will be completed. -# -# You must have mail / forcemail set for this to work correctly. -# It is also recommended that MailDelay be set to a sensible value -# to prevent mail flooding. This setting is [REQUIRED] if NSEmailReg -# is enabled. - -# NSEmailReg - -# NSDef... [OPTIONAL] -# Sets the default options for newly registered nicks. Note that -# changing these options will have no effect on nicks which are already -# registered. -# -# If both NSDefKill and NSDefKillQuick are given, the latter takes -# precedence. KILL IMMED cannot be specified as a default. -# -# Note: Both NSDefKill and NSDefKillQuick must be specified for Quick to take effect. -# -# NSDefMsg also controls the default setting for unregistered users. -# If NSDefMsg is enabled, unregistered users will receive PRIVMSGs -# instead of NOTICEs from Services. See UsePrivmsg for more information. -# -# NOTE: If you do not enable any of these options, a default of -# Secure, MemoSignon, and MemoReceive will be used, for backward -# compatibility. If you really want no options enabled by default, use -# NSDefNone. - -#NSDefNone - -#NSDefKill -#NSDefKillQuick -NSDefSecure -NSDefPrivate -NSDefHideEmail -NSDefHideUsermask -#NSDefHideQuit -#NSDefMsg -NSDefMemoSignon -NSDefMemoReceive -NSDefAutoop - -# NSDefLanguage <language-number> [REQUIRED] -# Sets the default language non- and newly-registered will receive -# services' messages in. The numbers are the same as those -# used for the /nickserv SET LANGUAGE command, so look the at the help -# of this command for the list of currently supported languages. -# -# If you ever wanted to know how to translate services in your -# language, read the chapter about it in the README. - -NSDefLanguage 1 - -# NSRegDelay <time> [RECOMMENDED] -# Sets the minimum length of time between consecutive uses of the -# REGISTER command. If not given, this restriction is disabled (note -# that this allows "registration flooding"). - -NSRegDelay 30s - -# NSResendDelay <time> [RECOMMENDED] -# Sets the minimum length of time between consecutive uses of the -# RESEND command. If not given, this restriction is disabled (note -# that this allows "resend flooding" or "mail bombing"). - -NSResendDelay 90s - -# NSExpire <time> [RECOMMENDED] -# Sets the length of time before a nick registration expires. - -NSExpire 21d - -# NSRExpire <time> [OPTIONAL] -# Sets the length of time a user gets to enter the confirmation code -# which has been e-mailed to them before the nick will be released -# for general use again. This setting is [REQUIRED] if NSEmailReg is -# enabled. - -# NSRExpire 1d - -# NSMaxAliases <number> [RECOMMENDED] -# Sets the maximum number of nicks allowed in a group. If you -# set it to 0, or don't set it at all, no limits will be applied. - -NSMaxAliases 16 - -# NSAccessMax <count> [REQUIRED] -# Sets the maximum number of entries allowed on a nickname access list. - -NSAccessMax 32 - -# NSEnforcerUser <user>[@<host>] [REQUIRED] -# Sets the username (and possibly hostname) used for the fake user -# created when NickServ collides a user. Should be in user@host -# format. If the host is not given, the one from ServicesUser is -# used. - -NSEnforcerUser enforcer@localhost.net -#NSEnforcerUser enforcer - -# NSReleaseTimeout <time> [REQUIRED] -# Sets the delay before a NickServ-collided nick is released. - -NSReleaseTimeout 1m - -# NSAllowKillImmed [OPTIONAL] -# When enabled, allows the use of the IMMED option with the NickServ -# SET KILL command. - -#NSAllowKillImmed - -# NSNoGroupChange [OPTIONAL] -# When enabled, the NickServ GROUP command won't allow any group change. -# This is recommended for better performances and to protect against -# nick stealing, however users will have less flexibility. - -#NSNoGroupChange - -# NSListOpersOnly [OPTIONAL] -# When enabled, limits use of the NickServ LIST command to IRC -# operators. - -#NSListOpersOnly - -# NSListMax <count> [REQUIRED] -# Specifies the maximum number of nicks to be returned for a NickServ -# LIST command. - -NSListMax 50 - -# NSGuestNickPrefix <value> [REQUIRED] -# When a user's nick is forcibly changed to enforce a "nick kill", their -# new nick will start with this value. The rest will be made up of 6 or 7 -# digits. - -NSGuestNickPrefix "Guest" - -# NSSecureAdmins [RECOMMENDED] -# When enabled, prevents the use of the DROP, FORBID, GETPASS, and -# SET PASSWORD commands by Services admins on other Services admins or -# the Services root(s). - -NSSecureAdmins - -# NSStrictPrivileges [RECOMMENDED] -# -# When enabled, any user wanting to use the privileges of Services Root, Services -# Admin or Services Operator must have been logged as an IRC Operator with the -# /oper command. - -NSStrictPrivileges - -# NSModeOnID [OPTIONAL] -# -# When enabled, services will set the channel modes a user has access to upon -# identifying, assuming they are not already set. -# - -# NSModeOnID - -# NSRestrictGetPass [OPTIONAL] -# -# When enabled, services will only allow Services Root to use the getpass -# command on a nick. - -NSRestrictGetPass - -# NSNickTracking [OPTIONAL] -# -# When enabled, services will track your last nick identified when issuing -# nick changes. - -#NSNickTracking - -# NSAddAccessOnReg [OPTIONAL] -# -# When enabled, services will add the usermask of registering users to the -# access list of their newly created account. If you disable this, users -# will always have to identify to nickserv before being recognized, unless -# they manually add an address to the access list of their account. - -NSAddAccessOnReg - -########################################################################### -# -# ChanServ configuration -# -########################################################################### - -# CSDef... [OPTIONAL] -# Sets the default options for newly registered channels. Note that -# changing these options will have no effect on channels which are -# already registered. -# -# NOTE: If you do not enable any of these options, a default of -# KeepTopic, Secure, SecureFounder and SignKick will be used, for -# backward compatibility. If you really want no options enabled by -# default, use CSDefNone. - -#CSDefNone - -CSDefKeepTopic -#CSDefOpNotice -CSDefPeace -#CSDefPrivate -#CSDefRestricted -CSDefSecure -#CSDefSecureOps -CSDefSecureFounder -CSDefSignKick -#CSDefSignKickLevel -#CSDefTopicLock -CSDefXOP - - -# CSMaxReg <count> [RECOMMENDED] -# Limits the number of channels which may be registered to a single -# nickname. - -CSMaxReg 20 - -# CSExpire <time> [RECOMMENDED] -# Sets the number of days before a channel expires. - -CSExpire 14d - -# CSDefBantype <bantype> [REQUIRED] -# -# Sets the default ban type for newly registered channels (and when -# importing old databases). -# -# bantype can be: -# -# 0: ban in the form *!user@host -# 1: ban in the form *!*user@host -# 2: ban in the form *!*@host -# 3: ban in the form *!*user@*.domain - -CSDefBantype 2 - -# CSAccessMax <count> [REQUIRED] -# Sets the maximum number of entries on a channel's access list. -# Channel access lists may contain only registered nicknames; -# therefore, checking each entry on the list requires only a single -# scaler comparison instead of a wildcard match, and this limit may be -# safely set much higher than (for example) the nickname access list -# size limit without impacting performance significantly. - -CSAccessMax 1024 - -# CSAutokickMax <count> [REQUIRED] -# Sets the maximum number of entries on a channel's autokick list. - -CSAutokickMax 32 - -# CSAutokickReason <text> [REQUIRED] -# Sets the default reason for an autokick if none is given. - -CSAutokickReason "User has been banned from the channel" - -# CSInhabit <time> [REQUIRED] -# Sets the length of time ChanServ stays in a channel after kicking a -# user from a channel s/he is not permitted to be in. This only occurs -# when the user is the only one in the channel. - -CSInhabit 15s - -# CSListOpersOnly [OPTIONAL] -# When enabled, limits use of the ChanServ LIST command to IRC -# operators. - -#CSListOpersOnly - -# CSListMax <count> [REQUIRED] -# Specifies the maximum number of channels to be returned for a -# ChanServ LIST command. - -CSListMax 50 - -# CSRestrictGetPass [OPTIONAL] -# -# When enabled, services will only allow Services Root to use the getpass -# command on a channel. - -# CSRestrictGetPass - -# CSOpersOnly [OPTIONAL] -# If this is defined, only IRC Operators will be permitted to use ChanServ. - -#CSOpersOnly - -########################################################################### -# -# MemoServ configuration -# -########################################################################### - -# MSMaxMemos <count> [RECOMMENDED] -# Sets the maximum number of memos a user is allowed to keep by -# default. Normal users may set the limit anywhere between zero and -# this value; Services admins can change it to any value or disable it. -# If not given, the limit is disabled by default, and normal users can |